Easy No-Math Pleats for Historical Fashion (How to Sew Cartridge Pleats)

Life of the Party
25 followers
10 Video Views·Oct 17, 2022
It may come as no surprise, but I absolutely love cartridge pleats.
For me, it's not only their intricate appearance.
The main reason why is they're actually pretty easy to make, with no math required.
Well, that's not completely true because there is counting required, but that isn't exactly math.
I was terrified by these initially, so I was surprised to discover their simplicity.
I'm going to show you now how to make cartridge pleats yourself,
so that way you too can take the plunge.
To begin with, you'll need your materials.
A tape measure or ruler, dress pins, embroidery scissors, chalk or another marking tool,
and your thread, which ideally should be a heavier button weight hand sewing thread,
as it's much stronger.
I'm using a contrasting color here just so you can all see what I'm doing,
but I'd recommend using a matching color thread, as you're going to leave your thread in the garment.
You'll also need two hand sewing needles and beeswax, which is optional.
Finally, you're going to need twill tape, which is also optional.
You're also going to need your project.
In this case, I'll be demonstrating with just some cotton scraps.
Now, you can either begin by sewing on twill tape to the top edge, or you can skip this step.
I've done both in the past, and I find that the twill tape method is best
if you want chunkier pleats that stand out more,
but it isn't as ideal if you're going for those tiny cartridge pleats
that you tend to see a lot of in the 1840s.
I'm going to use the tape for my example because I really like this method,
but if you choose not to, just hem your top edge with a double fold all the same,
or use the selvedge of your fabric.
Since I'm using twill tape, I'm flipping over the top edge seam allowance of my panel once.
Imagine, for instance, that this is a skirt panel,
and right now I'm folding over and pinning the seam allowance down.
At this point, you can sew it down with a machine, but I only hand sew,
so I'm going to use whip stitches on one of the edges to secure the tape,
and then felling stitches on the other edge.
This has set up a solid foundation for us to begin with the pleating.
I start by marking my top edge with a tape measure.
You can choose how large or small you want your pleats to be.
Here I'm marking every one half inch from right to left on the top edge,
and then I'm marking two points one half inch apart from up to down.
For smaller pleats, simply make your markings closer together
every three eighth of an inch, for example.
If you're using a checkered or tartan or plaid fabric,
simply use the marks of the fabric as guides for where to complete your stitches,
and then you don't even need to mark anything.
Thread two sewing needles, and you will want your thread to be at least the length of your panel.
But if you're working with many meters of fabric,
it can be helpful to work with the pleats in sections,
that way you don't have a five meter long thread.
I did this once and it really wasn't fun,
and I was extremely nervous that the thread was going to snap.
I've opted to wax my thread because I'm working with a cotton fabric here,
and I find that it makes the thread easier to use.
If you're working with silk fabric,
I don't recommend waxing your thread as it can sometimes stain the fabric.
The next thing you'll want to do is knot your thread,
both pieces, the ones that are going to get threaded into the two needles.
I like to start my knot on the wrong side of the fabric at the very first point that I marked,
but you can place it on either the right or the wrong side,
I just personally think that this looks a bit better.
Then working one needle at a time,
move from each point going up and down through the fabric from point to point.
Essentially a running stitch.
Complete this same process with the second needle at each parallel dot.
You want your two rows of stitches to follow one another evenly,
but in general don't worry about being perfectly precise,
as these cartridge pleats can actually be relatively forgiving.
Once you've sewn all of your stitches, the fun starts to begin.
Pull on your threads and gather up your cartridge pleats to your desired measurement.
Knot the other end securely to keep the pleats from coming undone.
Now you're probably wondering what to do with this pleated panel.
If you imagine for a minute that this piece of fabric is, say, my bodice.
One option that is very often taught is to take the pleated panel's right side,
so in this case it's going to be my hypothetical skirt panel that I cartridge pleated,
and line it up against the finished edge of the bodice wrong side.
So if this other fabric panel represents my bodice, then the two are going to come together.
The key is that the edges of both panels have to be finished.
So the bottom of the bodice panel is finished,
and the top of the cartridge pleated panel is as well.
Then carefully whip stitch each of the pleats to the bodice edge until they're all secure,
like what I've done in this example with a skirt that I made last year.
I find this method does, of course, work,
but I've actually discovered another one which I use far more often,
and I think it actually works a lot better.
I take the finished cartridge pleated panel and move it to the right side,
and I line up the edge of that right side against the right side of the finished bodice panel.
That way they match up, and as you can see they're both completely hemmed.
Then I complete shallow whip stitches,
catching just a bit of each of the cartridge pleat and a little of the finished bodice edge.
Once complete, I open up the two pieces and they're completely joined.
You'll of course use matching thread here, so your stitches won't be as noticeable as mine are.
If you happen to have a waistband to attach the cartridge pleated panel to instead of a bodice,
the process is exactly the same.
You'll just want to make sure that your waistband is completely finished without any raw edges,
just like the bottom of the bodice edge also had to be finished.
And honestly, that's it.
Isn't this far more simple than knife pleats, box pleats, or any of the others?
It also makes the garment look significantly fuller than other pleating options do in my opinion.
The only downside, however, is that it can eat up a lot of fabric,
but for the fullness, I think it actually makes a lot of sense.
As a guide for, say, a mid-Victorian skirt that is cartridge pleated all the way around,
you will need about four to five meters of fabric depending on the size of your markings.
If you'd like to amplify your next garment, be sure to watch this video next,
where I show an easy method of honeycomb smocking, which is a gorgeous and decorative technique.
Thank you so much for watching, and I'll see you in two weeks for another video.
