A leaky bathtub faucet is more than an annoying drip. The gallons of water wasted by a leaking faucet can add up to higher water bills and can break down the interior faucet parts. Repairing a leaky faucet is generally an easy fix. Find more help with our plumbing playlist: https://thd.co/3fmVoV5
Check out our guide for more help identifying the cause of the problem and how to fix a leaking bathtub faucet: https://thd.co/3BGmzBI
0:00 How to Fix a Leaking Bathtub Faucet 0:21 Step 1: Shut of Water Supply 0:44 Step 2: Remove Faucet Handle 1:02 Step 3: Replace Cartridge 2:08 Step 4: Check Faucet Spout 2:20 Tools & Materials
About The Home Depot: How doers get more done. We’re helping doers in their home improvement projects. Now you can take on more renovation projects with more know-how. Our step-by-step instructional DIY videos and expert advice will give you the confidence for your next project with hands-on learning. It’s a good time to be a doer.
A leaky faucet can be more than just annoying. The wasted water can add up to higher water bills.
We're going to take you through the steps of identifying and fixing
a leaking Battelle faucet without calling a plumber.
Before starting any work, shut off the water supply to the house.
The shut off valve can usually be found near the water heater or the meter.
Once the water is turned off, turn the faucet handle to the on position and let any remaining
water drain from the pipes. Old faucet handles can cause a dripping faucet. To check, the faucet
handle needs to be removed. Use an allen wrench to loosen the screw in the center of the faucet
handle. With the screw removed, wiggle the handle and pull it off gently. In order to get to the
cartridge, remove the handle adapter, followed by the scalp device. Then you'll see a metal barrel.
Slide the barrel off to see the cartridge. Worn or damaged cartridges can allow leaks.
Pry up the retaining clip. To remove the cartridge, attach the cartridge removal piece.
Using a wrench, work the cartridge stems out with firm twist and pulls. Apply a thin coat
of silicone grease to the new cartridge and slide into the faucet body in the same position as it
was originally. Reinstall the retaining clip, metal barrel, scalp device, and handle adapter.
Slide the handle on and secure it in place. Turn the water supply valve back on. Let the water run
for a few minutes to flush any debris from the components. Knowing how to fix a leaking battel
faucet can save time and money and you won't have to wait to put an end to the annoying drip drip drip.
Here's a list of tools and materials. Good luck and thanks for shopping at The Home Depot.
