Halloween is this weekend! Because of that, I made a holiday special featuring a monster inspired by the spooky Wendigo. I have had many requests and suggestions for a Wendigo in my Wild Western world, so here is my take. It’s not exactly a Wendigo, but it’s close enough.
If you are interested in joining the Hobby Time discord and want another way to support the channel, here’s the link to my Patreon! https://www.patreon.com/Boylei
Paint List: Citadel Contrast Wyldwood Citadel Reikland Fleshshade Citadel Nuln Oil Vallejo Mahogany Vallejo Dark Vermillion Vallejo Gloss Black Vallejo Medium Gray Citadel Agrax Earthshade
Music: Lovely Lies - The High Jynks Troublesome Tasks - Matt Stewart-Evans Shady Business - Matt Stewart-Evans Here, Now - Kevin Graham Slow Midwest Blues - Tony Peterson Running After Dark - Becca Stankis
Disclaimer: Some of the actions seen in my videos could cause bodily harm. I am not responsible for anything you do while attempting to recreate what you see me do.
Amazon Affiliate links are used above.Credit: Boylei Hobby Time
How's it going everyone? Welcome back to Boilie Hobby Time. This week I'm doing a Halloween special
and to start things off I jumped into Nomad Sculpt for the iPad and started designing my monster.
I looked at various artists' renderings of Wendigos from around the internet and they
are all pretty scary. A famous child-friendly Wendigo is Bullwinkle from the Rocky and Bullwinkle
and that was a joke. But like Bullwinkle, this Wendigo is an herbivore so it likes to eat
sticks and water plants instead of people. But like a real moose it will not hesitate to kill
you if provoked or if you mess with his pet squirrel. The most difficult part of this sculpt
was definitely the hands. It took me a long while to find something I liked but I did eventually
figure it out, finished up all the final details, then I exported and printed it.
The other character in this diorama is this little Davy Crockett looking guy
and standing next to each other you can see just how scary it would be to run into this monster
in real life. I wanted to put a lantern in the little explorer's hand so he could see
the monster more clearly so I drilled some holes through his arm and his back
and moved on to the base. For the foundation I'm using this plank of wood and for the landscape
itself I'm using some layers of XPS foam. I hot glued those together and then mid-squeeze I ran
out of my glue stick so after a quick reload I was good to go. I then used my handheld hot wire cutter
to carve away at the foam to create a little slope down into the lake and create the little shoreline.
I then used a torch and some sandpaper to give a little bit more of a natural look to the slope
and of course I used the necessary precautions so as not to inhale any of the dust or fumes
from the foam. I then covered it with a terrain paste made from plaster mod podge and paint
and this time I added some fine grit sand to help add a little bit more texture. I set that aside
to dry. I started painting the miniatures. I started painting one way using a side highlight
and some contrast paints and then I quickly lost my way. I forgot what I was doing and started
painting him a bunch of different ways that were not the way I had started painting him.
So in the end I had kind of a hodgepodge of weird painting footage but I came up with something that
I liked fairly well as the right amount of spooky in my opinion and I painted the little frontiersman
like you would expect a frontiersman to look. After the terrain paste had dried I used some
scenic glue to stick down some pebbles and I used some watered down scenic glue and isopropyl alcohol
to stick on various sizes of sand. It's all done in the name of texture. I also added some driftwood
to add a little bit more visual interest. I tested everything against the moose to make sure it was
to scale and left it to dry. After about 12 hours that was dried and I primed it. I added various
washes and kind of a gradient going from light to dark down to the bottom. The resin itself
does add quite a bit of a realistic water look but adding the gradient just took it to another level.
I then added some little grass and reeds along the shore and finished up the rest of the ground
cover. After all of the scenery was dry I used some acrylic sheets to create a little reservoir
for the resin to be poured into. I sealed up all of the sides with hot glue then I mixed up the
resin following the instructions on the box. Two parts resin to one part hardener and I'll just
let you watch this part. After 72 hours the resin was nice and hard so it's time to take the acrylic
off. I did peel some of the paint away from the foam which is not a huge deal because I'm going to
be covering it with a piece of styrene to clean up those edges anyways. I shaved off the excess
from the top and the sides of the resin and then I added some water ripples to create a
more realistic surface. I sculpted the ripples around his legs where he would be creating
some small waves and a wake. Then I drilled some holes for the wires to pass through from the
little figure into a battery housing. Unfortunately I did forget to plan ahead for this so I had to
cut away at the base kind of just throw something together. It's not the cleanest I do know that
but after I had put on the styrene and painted the little housing with a black 3.0 it wasn't
too noticeable. The last thing to do was to stick all of the trees in place along the shore
and also add a few little pieces of grass that got stuck in the moose's antlers. They called it good.
And that is it for this video. Thank you all so much for watching. I hope you enjoyed it. I had
a lot of fun with this build. I want to give a huge shout out and thank you to all of my patrons
for their continued support of this channel. I really appreciate every one of you.
Have an awesome week everyone. I'll see you next time.