The First 5 Mods You Must Do To Your Truck

Custom Offsets
3 followers
5 Video Views·Oct 21, 2022
The First 5 Mods You Must Do To Your Truck
Are you rolling?
All right guys, five seconds,
just want to let you know that Custom Offsets
is offering as low as 0% financing
on everything at customoffsets.com,
wheels, tires, suspension.
Did I get it?
When it comes to trucks,
if you're anything like all of us here at Custom Offsets,
you just can't leave one stock.
And I know most of the time before I even buy a new vehicle,
I'm already on our gallery looking at what setups will fit
and what mods I can do,
and then spending countless hours on YouTube
searching best exhaust for Ford Raptor.
So I'm Fuller from Custom Offsets
and these are the first mods
that I would do to my new truck.
So right off the bat,
we can't kick this off with a supercharger,
tune, exhaust, cam, re-gear, custom wrap, and so on,
because if you just bought a new vehicle,
you likely aren't interested in dropping that much cash
after you just spent 60 grand
on a new or new to you used truck.
Hands down, the first thing I do to all my vehicles,
even the beaters, is tint.
And you might be wondering why.
Well, because it's cheap, it looks good,
and even just tint can make a truck look more aggressive
or stylish or just simply clean.
Most places can get you a complete tint job
for around $200, and if it's just the front two windows,
that'll run less than 100 bucks.
Now, depending on your state,
you'll likely have different laws on tint,
but in general, most people can get away
with about 20% on the side windows and in the rear.
In full disclosure, that's not legal in most states, though.
Like here in Wisconsin,
you can only have 50% on the driver and passenger,
35% on the back seat windows,
and then 50% on the rear glass, if I remember correctly.
And 50% tint is like not dark at all,
like I wouldn't even waste my money on it.
Some people tint their windshield also,
and that'll add a substantial cost to your bill
since it's a lot of material,
but just be aware that it sucks to drive at night,
and I don't believe it's legal in any state.
If you're looking for tint,
make sure whoever installs it is a professional
and uses professional-grade tint,
because quality tints won't turn purple over time,
and they serve more than one purpose.
So one, it looks good,
two, people can't see you picking your nose,
and three, it helps keep a lot of the heat out
when the sun is beating down on your car,
which not only makes it more comfortable for you,
but will also protect your interior
from cracks or drying out if you've got leather.
And lastly, it just makes driving in the sun so much better
if you spend a lot of time on the roads like I do.
So the second thing on the list for me is suspension,
and now this can get pretty expensive
depending on the route you go.
You may want a $200 Levin kit,
or $6,000 coilover lift, or anything in between.
So depending on the size,
you might want to be thinking about wheels and tires here,
too, but we'll dive into that a little bit later.
Suspension is one of those mods
where it's pretty much required
if you wanna run larger than OEM wheels and tire sizes.
If you bought your 20 by 12s and 35s first,
you wouldn't even be able to install them
on your Silverado to get a seven inch lift.
But if you bought some eight and a half wide methods
and 33s, you might be able to stuff those on a stock truck
and deal with a bunch of rubbing for two weeks
until you get your next paycheck.
Since I abuse the ---- out of everything I own,
when I'm shopping for suspension,
I'm looking for something that will perform well,
not just look well, but that's not the case for everyone.
There's a bunch of good size kits out there
on our website for about $1,000
that would work just fine for about 90% of people,
but it comes down to personal preference
and how much and where you drive your truck.
If you spend 100% of your time on road
and you drive 10 minutes to the city to get to your job,
then a spacer lift will work just fine for you.
If you spend a lot of time on the highway,
you might opt for a complete strut replacement,
and if you enjoy off-roading on the weekends,
a coilover might be a better setup for you.
Either way, we've got all of that on the website
and we have the gallery set up
so you can just search by make and model,
enter in the suspension size,
and you can get an idea of what your truck
will look like once it's finished.
So the next step then is wheels and tires.
These happen at the same time
because it's much easier to pick up a new package
than to buy just wheels.
In fact, there's only been one time in my life
where I've bought just wheels,
and it was only because I found a smoking deal
on a set on Craigslist.
So as I mentioned before,
I would go with suspension before wheels and tires,
and I'll explain that a bit more.
It primarily has to do with making things fit.
Like I was saying, if you have plans to do 20x12s and 35s,
I don't know of any standard truck out there
that can fit these stock.
There are definitely trucks that can fit 35s on OEM wheels,
like the Ford Raptor and whatever Ram is making,
I think they call it the Rebel,
but you wouldn't be able to pull that off
on like a 12 wide negative 44 offset.
So rather than picking up a new wheel and tire package
and then stacking it in your garage to collect dust
while you save up for the lift kit that you need,
I'd suggest getting suspension first.
When it comes down to picking out
the actual wheels and tires you want,
there's almost too many choices.
On our website alone,
we offer over one million different combinations
and you can custom build any package you want
and we'll ship it right to you.
I'd always start with a gallery
to figure out what size I need,
then search by make and model
so I know they have the correct bolt pattern,
and then filter by size and start scrolling.
Once I find the set of wheels that I want,
I'll start my search for tires.
Now, I've been doing this long enough
that I have my favorites,
but I'd say the most common tire we sell overall
is the Nitto Ridge Grappler,
which is a hybrid tire that combines
the best of the mud tire and all-terrain tire market.
If you want a true mud tire,
lots of people opt for the Open Country MT,
and if you want a less aggressive tire,
the options broaden a bit
and you have things like the Falcon Wildpeak AT3W,
the Goodyear Wrangler Duratrac,
Nitto Terra Grapplers,
or the Atturo Trailblade XT,
which is really just super popular
because of the price point.
There's a lot of brands out there
some of you may not have heard of,
but the good thing is we have videos
on just about every tire we carry on our YouTube channel.
Once you've got the outside dialed in
exactly how you want it,
you're probably gonna notice a power loss
and a loss of some miles per gallon, too.
So the next thing that I would tackle
would be some performance stuff.
Now, depending on your budget,
this could vary a lot,
but I think I would recommend Attune to everyone.
Gas or diesel, doesn't matter.
You can see improvements on both.
There's plenty of tuners out there,
but it's important to do your research
and get a reputable shop or remote tuner to do your truck
because blowing up cars isn't fun.
Trust me, I know.
Ask me what 27 or 28 pounds of boost does on my drift car.
Anyway, Attune is a great start
if you don't have plans on adding any force induction
or opening up the motor at all.
If you're gonna do any of that stuff,
obviously you'd need Attune after that as well.
There's also a ton of people on our social media
who ask about re-gearing,
and it's actually not something
that a whole lot of people do
because it's pretty pricey.
If you need some acceleration back
and you want to turn your big wheels and tires
a bit more efficiently,
then you should look into re-gearing,
but it's not required.
If you've got a boatload of cash saved up
to do it all at once,
that's super cool and good for you,
but if you don't,
we do also offer monthly payments
on just about everything on our site, too.
So remember, we are Custom Offsets,
and we are self-proclaimed experts
on everything wheels, tires, and suspension,
and this is the part where I tell you
to come up to our website and check it all out.
It's customoffsets.com,
or just check the links in the description.
Peace.
