Small Vintage Trailer Renovated ON A BUDGET

Coffee Times
17 followers
5 Video Views·Oct 22, 2022
Small Vintage Trailer Renovated ON A BUDGET: Step by Step!.mp4
So this is going to be one of those she's a little nicer on the inside than she is on the outside
sort of videos. We're going to take you all and just show you what worked for us, what didn't
work for us, products we used, every step we took to remodel this little small camper trailer.
So let the work begin.
All right, this is ground zero. Let's do this. We're in. Let's get started.
All right, getting us some lights, turning on the power. There we go.
All right, guys, how about that for my new backdrop? So I'm just going to catch you up
really quick. We did a big degreasing of the trailer, 50 years of grease. Typically we'd use
TSP, but with COVID-19 and all the stores being shut down, no ventilators, respirators, nothing
to wear. This is a pretty harsh chemical. We picked up simple green. My wife would be happy
I chose this anyways. Did about a one to one ratio, took everything off pretty well. We only
had 120 grit sandpaper, which I think was a little rough. There's a few scratches here and there,
but if you're painting your camper, it should be fine. If you're going to stain it, I would use
something much more fine grain. Now we have taped everything up and we're about to throw on the
primer. For something like this, I would use a strong adhesive primer like Gripper. Gripper
says on here we don't even need to sand this. I may have just wasted my effort, but I just wanted
to be extra safe about this. We've used Gripper on everything, on metal, on linoleum. So we're
going to get into this quick. I'm going to show you it and I'm not going to drag it out. We're
going to boom, boom, boom, each section of the trailer till it's completed. So I have completely
given up on those foam rollers. Everybody says they're what you use for smooth surfaces, but
what we find is those foam rollers just leave a bunch of orange peel on it. There's always bumps.
So we use these more, this is called an ultra smooth finish. It's got a nap on it,
whiz applicator. So it's kind of like the foam ones, but again, it's kind of furry
booster pros. And then this new guy, the heads are always sticking on these things. So this has a
nice head with a bearing in there that spins. So you get a smooth application.
So we are just at the threshold for doing this. You have to have it at 35 degrees Fahrenheit.
We're at a low of 38 and a high of 40 or 41 today. So it's going to be, it's going to take
quite some stirring to get this warmed up and ready to go. The most annoying section done above
the bunk. You're going to go like this. You're going to go this way. Fun, huh? Looks like we're
ready for the paint. Got a little heater in here to get it up to the right temperature. It's Alaska
and we still are in the forties, but it should be good if I keep this going all day. This section
is the hardest because fitting in there, it is so small, but we got one layer on. So we got some
white laid down. Most people put white on a small camper trailer like this, but in our opinion,
we think it cheapens it a little bit. So our goal is to keep the cabinets white and then make the
walls a light gray. Uh, it just gives it a more rich look. Uh, it still looks very airy, just like
white. Remove the painter's tape. We use frog tape, a little more expensive, but man, this stuff
sticks down and gives you pretty clean edges. So we're just going to pull up this tarp, get in there,
pull out the couch cushions, measure them, go get some fabric today and get them good as new.
Good job. High five. So I said I was going to share some of the problems we had, some of the
mistakes we made. The first mistake we made was a big one. And that was we were sitting up in the
house doing the whole social isolation thing. And I just had this thought like, what if all the
paint runs out at stores or what if all stores get closed down? So I ran out and I picked up that gray
and that white paint and just slapped it on halfway through the process. I realized I just put regular
interior paint on a cabinet. It doesn't sound like a big deal, but we've done that many times
and it doesn't hold up. Uh, we find ourselves doing touch-ups over the years.
Now we go out to someone like Sherman Williams and we just say, Hey, do you have a good cabinet
paint that holds up, holds up to all the scrubbing, holds up to the doors hitting each other.
Once we've done that, we've had no issues with touch-ups. They just hold well. So as usual,
the snow hit again and I was just in a bit of a need for a break from the project.
All right. So today we're going to go show East the ocean. So he thinks the ocean in the winter
is full of sand and he's going to go swimming, right? Yeah. And make a sandcastle. I'll let you
make a sandcastle. And you want your boots and socks off for the sand? Yeah. To go barefooting.
All right. Let's go barefoot out there. All right. We're going to the beach.
It's frozen. What do you mean? I thought there's going to be sand.
You're going to go swim in that water. Okay. Let's go swim, huh? Time for the cabinets.
So just pulling out the 220 grit sandpaper, just going to put a rough edge on here so we can get
that gripper primer to stick. Been doing a lot already. Here we go.
Really hard to shoot and do this all at the same time.
Time for the cabinet primer. Again, we're using gripper on these cabinets and the cabinet doors.
Just running the brush to get in this tough edge and then rolling the rest of it out to match the
finish inside the camper. Just installed some light fixtures and then a matching light fixture
right here. So this here is just a mixture of baking soda, three parts to one part water.
We're going to throw it here on this old rusted out stovetop and see if we can make any headway,
but I don't know. There's a lot of pitting here. So I don't know if I can make any.
If this doesn't work, I think I'll try some WD-40 and then maybe some Bar Keeper's Friend.
I'm not sure. We'll just keep trying. See this beautiful tile behind me? It took a lot of work.
It's actually just the sticky vinyl that you just peel off and put on. It turned out really nice,
but it was a really hard project. I think it would have been equally as hard if Drew had done tile
in grout. Lessons learned. If you are to do the sticky vinyls like we did, I would order way,
way, way extra because we ended up having to cut off a lot. That's what the directions say.
So when you get your sample, you have to cut off a big chunk before you can start. I don't know why
the directions say that. I didn't do the project. You can ask Drew. But every time he would stick
it on to try to readjust, it would end up ripping because it was so sticky. He would rip off chunks
of it. So we don't want to drag this company's name through the mud because maybe we didn't do
it quite right or maybe we just had not the best area to do our backsplash, but it's one of the
best sellers on Amazon. You can easily find this on Amazon. Mistake number two. Now I know earlier
we said paint it gray, the walls and do a white cabinet because you'll get a good contrast and
it looks good. Yeah, it looks good, but I would say it caused me an extra day of just cutting in
with the paintbrush and then taping off spots because you had to always have that separation
of the colors. If I would have just chose a white to do the entire thing, there would have been no
cut-ins. There would have been very limited taping. And if I would have chose the cabinet white,
now we have the strength of a cabinet paint throughout the entire interior. I mean, this
is a trailer. Yes, it would look better with gray and white, but our family's going to be
running and playing in this. And I think I'd rather have something that withstands the test of time.
I'm usually the chalk person, but this time Drew took on this project. The only tip we would have
for you guys is to make sure you don't roll over the same spot two or three times. Otherwise,
well, when you do that, the paint gets put back onto the brush for some reason.
It makes it kind of hard, but it comes out in the second coat, so you'll be okay in the end.
So my husband Drew is super sweet and he bought this trailer for me. Every single thing here that
you see was done by Drew, 100%. I didn't do anything. So I'm going to come back through
at the end to just kind of do the finishing touches because it's my trailer. This countertop
is going to get a facelift. We need some command hooks to hang some maybe mittens and stuff,
towels. Oh, that table needs redone. Oh, no curtains. We need curtains in here. And then
just some aesthetics like a little posters and cute little stuff to make it homey. All right.
So here's a tour of the entire 10 foot of the trailer, literally 10 foot trailer. I had to
pull out May's wide angle lens just to get these shots. So if you guys want to remodel a trailer
similar to this one, we have a video right here. That's about a walkthrough of a used camper
trailer, just helping you find things that are wrong with it. So you don't invest in a money pit.
And then right here, we have playlists of 13 foot scamp videos. If you're interested
in a trailer about this size, scamps may be the way for you to go.
Subscribe if you haven't to the video and we'll see you guys next time.
