Wow, we finally did a description with helpful links! Here is one way to install a new route starting at the top with a fixed line called “Rap Bolting”. Some say if you can’t lead it don’t bolt it, others say the bolting job will be higher quality if you aren’t terrified the whole time. What do you think?
While top rope solo climbing, identify where the ideal bolt placement should be, drill your hole, brush and blow it clean and test fit the glue in bolt (if that is the type you are using). Continue up until you get to the anchor and drill that with the next pitch and/or rappelling options in mind. Then crack your glue open and start gluing. Have gloves and paper towels and try not to get it everywhere. A plastic bag for drips and trash really helps. You glue top down with pre-drilled holes so you aren’t rushed on by the adhesive working time. All these details can be found on the #BoltingBible (link below).
Here is a link to Key West Florida if you really want a link https://goo.gl/maps/sywTUY7xBxAmyGN38 This area is not to be disclosed yet and when it is we will update this description. Tell us how you think it can be done responsibly.
➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜ After 8+ hours of editing, we got an hour episode down to a little over 30 minutes. Here are chapters if you want to skip to parts you are most curious about. 00:00 - A Silly Intro 01:12 - Ethics 07:01 - Trundling 15:22 - Development 17:41 - Drilling 25:29 - Anchor 28:26 - Gluing ➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜➜
In this video, check it out on... hold on, I'm out of breath.
Would you like to see us bolt a sport route from the top down instead of from the ground up?
We're going to hike through the snow here and go to a really cool spot
and Bobby is going to show us how to do that on this episode of Go Not To Highline.
Hi, I'm Ryan Jinks and welcome to a Conversation Starter here in Key West, Florida
where we are going to talk about rat bolting versus ground up bolting.
Forgot to introduce you, Bobby.
Shit.
This is...
Bobby Hutton.
And we are going to show you how to install bolts from the top down.
Well, we kind of go up and down.
It's called the rat bolting versus our last video that you can see wherever I put it on the screen
of us bolting from the ground up.
And we are going to talk about the differences before we start
because there are opinions, ethics, and egos involved.
And God forbid, God forbid we don't talk about this.
What's the process? Give us like an overview.
Very simply, ground up bolting, you walk up to the cliff, you look for a line,
and then you get on lead and go for that line putting in protection, bolts, whatever, as you go up.
Rat bolting, you start from the top and you put in bolts with the assistance of a fixed line or on the repel.
In that scenario, you also should start from the bottom and go ascend up the rope as you're putting in bolts.
But the point is, if you fall, you're not going to fall very far, whereas if you're going ground up and you fall,
you could fall all the way back down to the ground.
So you can install harder routes than you can climb doing it this way.
Yeah, you can.
I chose to rat bolt this area mainly because of the rock quality.
It's not very good, so I chose to use glue-in bolts.
Glue-in bolts, because of the process, a lot harder to install ground up.
And also, since the rock is not very good, I'm much more likely to pull something off while I'm climbing.
And if I'm doing that ground up, I'm much more likely to end up at the bottom of the cliff.
Tell us a little bit about this rock.
So this type of rock is volcanic breccia, which is an awful lot like conglomerate.
So the clasts or the rocks inside the conglomerate are angular in breccia as opposed to rounded,
which means they didn't move very far and get rounded off.
I think glue-ins are the right answer here.
Mechanical bolts would seem a little bit sketchy.
And it would be pretty hard to install glue-ins from the ground up without any assistance, any hooks, anything.
It's just a more complicated process.
And I think you're trying to build out this area for everyone to enjoy.
If your stances, your good, light, solid stances that you can drill or hand drill are really far apart,
then the bolts are going to be really far apart.
Because your bolts are friendly roots.
That's the goal.
They're safer to climb.
You don't have to be a hard-ass, a badass, in order to climb these.
I don't like being scared, so I tend to bolt routes that I'm not scared on.
And hopefully other people enjoy that.
I know I will if I end up sport climbing these things.
So the reason we're not going to tell you exactly where in Key West, Florida this is,
is because this area is not well-known.
And before it is well-known, because eventually I think it's just going to inevitably happen,
he's going to have all the routes figured out, bolted, and a nice guidebook, I believe, of the area.
And he's working on trails and figuring out the locals around here, what their needs are and what the area's needs are.
Because a lot of people really shit on an area.
Too many people come, they don't stay on trail, they don't keep the area clean,
and we just don't want it to turn out like a lot of overcrowded areas.
Put in the comments below how we can take a brand new area like this
and share it with the world without it getting screwed.
The goal is to develop it so it can be used sustainably by whatever climbing population wants to use it.
My goal is, in 15 years, the Access Fund is not going to have to come and fix this area
because it wasn't developed with foresight.
Put in the comments below what you think about ground-up versus rat-bolting.
We're going to show you in this video how Bobby rat-bolts.
So these ones, we've broken the four-inch ones, not the super-large eye like these.
They look more like this.
I'm sure they would break the same.
I'm sure they would because it was the material that failed.
And we broke, shoot, what, $200 or $300 worth of connectors trying to get these to broke,
and they finally broke at like 75, 80 kilonewtons.
It takes a very special shackle that you don't use climbing to break these.
Yeah.
Any carabiner, literally any carabiner you use will break before these will.
If you want to see climbing anchors, we have, in the link in the description
and this video somewhere around here,
we have made a whole video about the different kinds of climbing anchors.
All of this stuff can be found in the bolting bible on slackline.com as well.
And these are the actual bolts I'm going to be using.
These are the anchor bolts.
Oh.
Yeah.
Good to know.
These seemed a little burly for every freaking move.
Originally, I was using the 8mm, 6-inch, which are the biggest bolts that Bolt Products standardly makes.
They say they'll make any size for you, which is pretty cool.
But after doing a ton of testing with Ryan, realized just how overkill these are.
And so I've moved to the smaller 6mm version, which most people are using.
And these go in a half-inch hole.
The carabiners and ropes, they break before this breaks.
Yeah.
So we saw these breaking 35 to 40 kilonewtons in the direction they'll get loaded
and they untwist from the rock at 20, 25 kilonewtons in the direction that they will be loaded.
This has a lot of loose stuff, so we're going to repel.
I'm going to repel next to him and film the process.
I'm going to do top-down filming.
Tell me how you think about that.
To wrap bolts, you have to set up a line to rip film on.
I'm using these Titan concrete screws, which I find are great for temporary anchors
because when I'm done with this anchor, I can just zip them out and patch the hole.
Is this not going to be your anchor for the top?
This is going to be my primary anchor at the top of the route.
So I would just pull them out, oversize the hole, and put a glue in.
Gotcha.
Yeah, so we're going to repel down, and as we go, we're going to be looking for loose rock
and removing any of that that we see so we don't run into it when we're going up
or our rope above us doesn't knock it off on us.
Are we going to bring up the ethics of trundling?
So, trundling is generally pretty bad because people don't want rocks knocked down on them.
Weird.
Here, there's nobody down there.
And I would be surprised if there's been anybody down there in the last 50 years.
Let's say it's a more popular area and you can see there's no one down there.
Is it ethical to throw rocks down?
Not unless you don't have to.
What's the alternative?
Collecting them and taking them up to the top of the cliff.
Or lowering them down slowly.
Repelling them into, like, putting them in a haul bag as you go down.
Yeah, you could do that.
The point is you don't want to leave loose rocks on a route you're developing
because it will make the people climbing this after you either very sad or very angry at you.
Very sad, very angry, or very dead.
Would you like to see what my left foot is on?
That doesn't look like that's going to stay on there very well if I move too much.
Something that's pretty important for the longevity of your rope
and life
is to make sure your rope is not underneath rocks that you trundle.
It will cut the rope.
Ten out of ten geologists will pick this.
This is a geologist pick.
And that's what I'm going to pick at this stuff with.
So the question, Bobby, is this thing is just sitting here.
Is it worth pulling off?
This is scary.
Everything feels wrong about that.
Tell us if you think that's wrong in the comments below.
Generally I use, like, small hand tools like this geologist pick
and if it comes off with that, it's probably not going to stay on forever getting climbed on.
If it takes much more than that, some people I'm aware of use big crowbars and sledgehammers
to remove stuff from routes.
It was bigger than this, probably about twice this size,
and the whole thing shifted on me and started to come out while I was below it.
And I very quickly pushed it back in and told it to stay.
And it did.
And you left it?
No, it's down there.
Oh, gotcha.
Yeah.
This I 100% do.
I always have my hammer out.
Usually it's just dangling so I can grab it and tap the rock.
Maybe knock off little rocks that somebody might put their foot off and that would blow on them.
I mean, here I'm always tapping.
Cool.
Tripod!
Hey, it's exactly where I want my tripod.
Damn it.
So as I go down, I'm looking for loose rock that I don't want the rope to knock down on my head
or for me to pull on myself when I'm coming up.
Of course, I usually find more every trip up.
And I'm also, I keep looking back up and I'm kind of keeping an eye out for the line that I want to pull.
So I have top-roped this already.
I think there's a section down there that might be mid-11s.
The section at the bottom, I'm going to split this up into two pitches.
That first section will probably be like 5'8".
How do people get back up if they rappelled into this and they struggle to get back up?
Or the weather turns on them or something?
You could walk off to the access road.
Okay, cool.
But it's more easily accessible if you get to the top and hike back out?
No, I think I'm going to put in a trail to the access road and this will all be access from the bottom.
Because as we saw at the top, there's a lot of loose stuff at the top.
And I really want to keep people, if I can, from being at the top walking around.
Can we all give a shout out to Bobby for wearing good colors again?
And look you guys, the same colored shoes this time.
Go check out the other video.
Why did you have two different shoes?
Everyone wants to know.
Everyone did want to know.
Over the course of one weekend about a year ago, I lost both of the mates to those shoes.
And being cheap, I didn't want to buy brand new shoes.
So I just used both of them.
That makes sense.
Here's something.
Not even needing to use the geologist pick.
So there was a pretty big log here.
I didn't use it like that.
Which would have been pretty terrifying if you were leading the route.
What do you mean if you're belaying somebody?
Maybe even more so.
And so there was a lot of dirt behind that.
I might come back up here with a leaf blower and blow off.
A leaf blower, that would be so awesome.
I've got a little battery powered one that fits with all my Milwaukee batteries.
This is pretty good rock quality for this area.
That sounds great.
And it's pretty blank for this area.
I mean, not granite blank.
This on El Cap would be a 5'7".
The sections leading up to that wouldn't be.
Okay.
Am I rappelling into frame?
Did I do it right, Ryan?
Yeah, except you said rappelling into frame.
This ledge is about midway.
My plan is, and we'll see as we go up, is to put an anchor here.
Because there's a big split in the character of the route here.
Here up is, I'm thinking maybe in the 11 range.
And down below is in the 5'7 range.
Alright, so are you going to put the anchor in yet?
Or are you going to go all the way to the bottom first?
No, I'm going to go all the way to the bottom.
Cool.
Rant.
I was at Tap Point one time and I watched this person lift this giant rock.
Big guy. It was the heaviest thing he could lift.
Threw it over the railing.
And it was just so upsetting because, I mean, in such a popular area like Yosemite,
there are so many people there.
You don't know where there's climbs or where there's people.
Here it's so easy to know whether or not there's anybody down there.
If you're not 200% sure there's not people below you,
please don't throw rocks.
I do want to hear you guys' opinions on that.
And also what you think about just route development as a whole.
Should we leave rocks alone and just let them exist?
Or should we try to thin out where everyone's trying to climb
and spread the impact around
instead of to just the main couple places that people climb at?
L and D, guys.
That means leave no tripods.
Alright, Bobby. What's the plan?
I'm trying to pick out what the best start would be
because I have an idea of where I want the climbing to go up higher.
I'm really leaning toward this over here
as opposed to going up through this roof,
which is a roof because the rock quality is not very good
and everything else is falling off in there.
Or I could go over here,
but I've got another route in mind that starts over there
so I'll probably stay on the left side.
So you're climbing right now?
I'm climbing.
Cool. What's your safety?
So this grigri here is my good friend
and I progress capture as I go up.
I'm also tying cassary knots, cat knots,
in case the grigri were to slip.
It would catch on those knots.
Why not use a micro traction or one of those Rotman things?
The grigri really shines in that you can go up and down really easily.
It's super easy to disengage and lower yourself.
Say you're like, I didn't like that sequence,
I want to go down and just try it again.
It's really hard to disengage like a micro trax once it's loaded.
It's so featured, it's hard to find a flat spot.
And I'm really glad I'm using gluon bolts
because you don't have to have as flat a spot
as if you're trying to get a hanger to sit flat on the rock.
It seems like you're really close to the ground.
Why are you putting a bolt in already?
The consequences aren't just me taking a boulder fall in a gym
onto a padded surface.
If I take a fall here, this is not a good surface.
And I'm probably not going to stop right there.
There's a potential for somebody to roll down the hill.
And so I want to mitigate that if I can.
Right in here, at my elbow, so somebody much shorter
could reach that as opposed to what I could reach up here
from this very comfortable stand.
Smooth this out just a little bit so the bolt fits in there nicely.
Clean the hole, which they tell us is important for gluons.
Have we found that to be important, Bobby?
We have not.
We're also using pretty good glue, and it hasn't seemed to make a difference.
But it doesn't cost me anything or cost me very little
to make sure it's clean, so I try to.
And then we're going to leave a bolt in the hole
so I can find it when I'm coming down with the glue.
You don't want to try to find random-ass holes in all this rock.
Oh, look what Bobby has this time.
Bolt bags.
Yeah.
Okay, so you're not gluing right now.
I'm not gluing right now.
Why?
Because I don't want that giant dripping glue gun here
while I'm doing everything else.
So I cut it into stages.
And also the nozzles on the glue adhesive, they harden up.
You only have so much time to put in bolts,
and I don't want that kicking clock when I'm trying to design a route.
And so I do it all in one step.
So I prep all the bolts and do it in one step.
It's very unlikely anybody is going to fall here,
but this gets a little bit more difficult.
Oh, I would want a bolt there for sure.
I'm thinking about over here because going up,
this gives me a cleaner fall if I were to fall above this
as opposed to somewhere here where if I were to fall,
it might direct me into these rocks here.
That one I'll probably have to tap in with the rubber hammer.
How many bolts do you think this first pitch will take?
Eight?
Yeah, probably right at eight, maybe seven, maybe nine.
This is super comfy here, and if I got to here,
I'm probably going to step up a little bit and have a bolt up in this area.
Yeah, so the bolts I'm using, the twist bolts from Bolt Products,
our friend Jim Kent over in Germany,
they have just a little bit of an interference fit,
which is nice in a lot of scenarios,
but in this hole where it's going straight in
and I don't need it to be held in by the interference fit while the glue is drying,
it's just a much nicer fit there.
Head over to the Bolting Bible on slackline.com
if you want to learn how to place bolts more in detail
and just kind of rock types and glue types and fine guides and everything.
We just got a lot on there.
And we're also going to have a forum on there when you go on there
for you to tell us how to make these videos better.
Please go on slackline.com and give us your feedback.
We do read the comments below,
but it's also nice to get more of a Google form survey kind of thing going.
So yeah, head over to there and let us know what you like.
And please hit that like button.
Oh, I got to catch up with Bobby now.
We're body lengthened a bit from our last one.
I have a nice, nice stance here.
Not getting hard, but this is definitely the harder section of the route.
So I'll probably put a bolt here where you have a nice, comfortable stance.
You just pull to move.
And then we'll put another one another six or eight feet up there.
Does that drill bit get hot enough to melt your rope?
I want to see.
Yeah, do it right about here.
It's warm.
I mean, it's probably 120 degrees.
Well, if you can touch it, it's fine.
But that is a fear.
So to show the difference, I did not wallow this hole at all.
And that interference fits starts right about there.
I have a rubber mallet that I can tap it in there.
It always makes me a little nervous doing it like this because sometimes it doesn't go in all the way.
Like, I have that issue a lot with the wave bolts.
Like, it won't go in all the way.
And so it's sticking out like that.
And the glue has hardened.
And the interference fit won't let it come back out.
And then I have a box placement.
Yeah, and I might be able to put it over here.
Yeah, that's still fairly in line.
That is super in line.
Yeah.
And there's a nice big clasp here that I'll probably drill through and hit the matrix in the back of this if it isn't solid all the way through.
Getting the bit started can be a little bit tricky.
Because there's not really an indent where the bit would have purchased to grab onto.
So this drill has just a chisel feature.
And so it's not spinning now.
Make a little indent for the bit to grab when it is spinning.
So you'll notice this is not the same drill that we used in that last episode.
Yeah, this is the big one.
And I can get away with carrying this and climbing because I am on a rappel.
So three years Bobby has been working on this area.
And he has several thousand dollars into bolts and glue and hardware and tools.
It goes way up when you add those last several things.
Yeah.
PayPal or Venmo?
I got both now.
I'm so modern.
All the donations that go to this channel go back into making the episodes, the edits, the brake tests, the brake test machines.
I really appreciate those who have been donating.
It's made the brake test machines that we have and are going to have.
I'm working on a drop test tower.
We have our 100,000 hertz dyno in the mail.
So thank you and let's go put in that anchor.
What's the verdict?
Where are we putting the anchor?
So I think we'll put it in here after Bobby struggled around over there.
There is a really fun sequence of moves that goes up to those knobs.
And I'll put a bolt up there somewhere pretty close.
So if somebody were to blow it in that or above that, they'd fall next to their belayer if their belayer was at this anchor.
And I'm going to be using the 8mm.
It's going in a 5-8 hole because I have a lot of those that are designed as anchors that I bought when I was still using these giant bolts.
Before I finally decided that a safety factor of like 35 was overkill.
Open system lower off.
So you don't need to untie to clip into this and lower off or repel.
The top bolt is going to see all of the force.
And this Ramshorn pig scale from Jim Titt Bolt Products is going to see all of the wear.
And then this is backup for redundancy.
So this theoretically won't see very much wear.
Whereas this part, which is pretty easy to replace, will take most of the wear.
What's the metal you're using on these bolts?
So these are 316L stainless, which is now apparently...
We have not been able to confirm this because EN standard costs money to just look at the standard.
Apparently that's the standard is 316 stainless or titanium.
Something like that.
So the top rope will go through.
We've got decent spacing.
So you don't want to have it too far out of alignment.
Otherwise, you're putting a lot of wear there, which this is not as easy to replace.
And there's no reason to put wear on it when you have this piece here.
Yeah, so you want to avoid where you can clip into the same rope.
So if this fails, this is not necessarily going to do anything.
Nice. Let's go get some glue.
So I have my caulk gun here.
This is a high output, which means it has some ratio here, so it's stronger.
It's made for denser materials.
And in here, warming up, I have some Liquid Rock 500, which doesn't function all that well when it's super cold.
Basically, my rule has always been if you're wearing a jacket, this glue doesn't work.
I've nestled inside of here for the last two hours.
Can you tell he's from Lodi?
I'm cold. The sun went away.
Anyways, my glue is not, so if his glue, he left out in the sun, that there is no sun left, then yeah, we have my backup one.
We're going to use this as our trash bag, and we're going to squirt some out here, make sure it's being mixed properly.
See that white? It's not on this side. That's too dark.
You have to wait until it's properly mixed.
It's starting to get lighter there.
Yeah, that lighter color is better. Way better.
Now we're going to fill them about three quarters of the way up with adhesive.
You're starting up here instead of at the bottom, so you can repel to the next one, which is faster.
Yes, we climbers really like to let gravity work for us.
It's still coming out when you let go.
That's why you release pressure when you stow the glue.
Otherwise, you'll get stains or actually harden glue all over your pants.
I've never had that happen to me more than twice.
And I wear pants that I've already ruined like that.
So twist bolts, you twist them in.
Spreads the glue out more, makes sure there's a lot of contact.
You can counter-twist them as well.
I may have put in a little too much glue, which is fine.
I'm just a little bit wasted.
Better that than having that tight interference fit and there not be enough glue in there.
You don't want to use a normal hammer because it can transfer iron that will rust onto this.
Really not sure if that makes a difference strength-wise, but it sure looks bad when it's all pitted and rusted here.
So what do you do with all that extra glue?
So we're going to wipe it off and throw it away.
Time to just smooth it out there.
So you don't want to leave any to dry on the bolt.
And I'm going to get in there and make Ryan move and fix that.
So I really like this Liquid Rock 500 because it gives me a little bit more time than the AC-100 that I was using earlier to detail it like this.
Because this will be here ideally a lot longer than I'm around.
And I want it to look nice.
It actually looks pretty nice. I like the color too.
Yeah.
The LTV-3500 is very red, but it works really good in cold temperatures.
So that's an alternative great epoxy.
Another thing I like about this anchor is it's much lower profile than other anchors that I've used.
Anything with chain in it is just going to pop on the cliffs.
These take a lot less glue.
Yeah.
Give it lots of twists because you want that glue surrounding the metal.
So not quite enough, so we're going to add some more.
And just like we did with the first inserting glue, you start at the back.
Huh.
I'm happy with that.
So we're on the last bolt here.
What do you do, Bobby, to keep people off these bolts while the glue is drying?
So I'm going to do something called red tagging.
I've got a red zip tie in my pocket that I'm going to attach to this once I think it's pretty enough.
And in climbing, that means this route's not ready to climb.
Either one, it's not safe, which this glue will not have dried by the time we leave.
And then two, like, don't climb my project.
Those are the two means of red tagging.
When do you take it off? When you come back and send it?
No, like when I come back and, like, check to make sure the glue's cured properly.
And inspect your work?
Inspect my work, I'll take it off.
Cool.
I don't really care about first percent.
Make sure you give a shout-out to Bobby in the comments about all the work he's putting into this area.
I'm sure it'll eventually come out.
No, we're not in Florida.
But I do want to hear your guys' thoughts on how to reveal an area without it ruining that area.
That's a super interesting thought to us.
And go to our website, hit the like button.
And make sure you subscribe because we are going to do some more bolt videos, bolt breaks.
And, you know, tomorrow we might be breaking some totem cams.
So make sure you stay tuned.
Cheers.