basteln mit Papier - Papiertüten - Geschenktüten falten DIY

The Right Way
40 followers
15 Video Views·Nov 3, 2022
Hello everyone, I made some gift bags here.
The big bag is made of clay paper.
The small ones are made of origami paper.
For this size you need a sheet in DIN A4 format.
I will also show you the instructions today.
If you want to make smaller sizes, I recommend thinner paper.
You don't have to pay attention to any particular dimensions,
it just needs a straight piece of paper.
First we have to put a small mark in the middle of the sheet.
For this we put the paper on the long side side by side
and only fold a little at the lower edge.
Now the right edge of the sheet has to be folded to this mark.
The left side is folded about 1 cm over the middle.
This side has to be opened again
and a thin strip of clay glue is smeared along the edge.
The sheet is then glued together and the whole thing has to dry well.
Next, the lower edge is folded about 5 cm upwards.
The left edge should not be longer than the lower edge, from the edge to the middle.
This folded part is now opened.
The left side is pushed down so that the two lines are flush.
The right side is also folded down like this.
Now the lower edge is folded about 5 mm above the line upwards.
The upper edge is now also folded at the same distance from the line.
The whole thing is then opened again
and a small stain of clay glue comes into the middle of the two upper triangles.
The upper part is folded down again and glued.
Now a little clay glue comes on the two lower triangles
as well as on the edge of the upper half
and is then also glued.
Here, too, the whole thing has to dry well.
Next, the outer transverse edge is folded to the inner transverse edge.
You should also make sure that the edge runs in parallel with the glue edge.
The opposite side is then also folded like this.
For the next step, the bag must be opened
and the floor is carefully pressed on with the fingers.
The side edges are now folded with the fingers afterwards.
The middle creases are pressed inward on both sides
and the side edges are put together.
The triangle must look sideways inwards
and its edge on the floor outwards.
Now the bag is ready and can now be filled as much as you like.
After filling, the opening is folded twice about 2 cm wide.
The opening is fixed with a dab of basket glue.
Finally, only a ribbon is wrapped around.
Ideal, I think, are the ribbon straps with wire edges,
because they can be put in this beautiful shape.
Ta-da! And my little gift bag is ready.
Thank you for watching and I hope you enjoyed the tutorial.
If you feel like it, leave me a comment below the video.
I would definitely be very happy about it.
I wish you a lot of fun crafting and maybe see you next time.
Bye!
