How to hand carve a handmade wooden bowl. Wood from the Argentine Patagonia / Fuente tallada a mano
Walter, wood craftsman, chooses a trunk where these beautiful handcrafted creations are born.
His hands show wisdom and experience in carving.
His art can be purchased at Plaza Francia, under the streetlight 24.
Contact: [email protected]
#patagonia #radal #artisan #craftsmanship #bows
Walter, artesano de la madera, elige un tronco donde nacen estas hermosas creaciones artesanales.
Sus manos muestran la sabiduría y experiencia en el tallado.
Su arte se puede adquirir en Plaza Francia, debajo del farol 24.
Contacto: [email protected]
#patagonia #radal #artesano #cuencos
Francisco!
Yes?
Come here, give me a hand, we're going to cut a log.
We're going to cut it here, or we can cut it a little more here.
No, because you see the knot here, it's like the tree...
Here it opened up.
It opened up.
Yes, it opened up.
It doesn't weigh a lot, but...
Let's see if we can change the saw, Pancho.
Let's see this one.
And look at this one.
Now let's go to the details to see what we're going to cut.
We're going to cut this one here, right?
Of course, that would be one of the cuts.
I can't cut it like this.
But I can.
Or like this.
There.
This one here.
Well, let's go slowly to recover most of the wood.
Of course, we're going to keep playing, because this is going to keep playing.
I don't know if I can get the saw from here.
The strong one is here.
We move it forward to see if it comes out whole.
Well, you can imagine, it lifts everything up, even the trunk.
You have the whole trunk.
These two.
Well, this is what came out of the piece of trunk.
And well, now I'm going to choose two to try to refine all of this.
Here I'm making a cut that comes out of the trunk, you see?
There, so I don't lose what's left.
And I glue it with an American glue, which is to glue the hulls of the boats.
So it's exclusive for the water.
Well, here we're trying to find the support.
If we don't find the support, we'll see how to put a leg here.
But well, it's almost rustic.
Today we're going with this, which is radar.
This is the hull.
And this is the radar.
Both are from Patagonia.
Next time we're going to work with hulls.
This, we have to go and waste time.
We have to go to the locksmiths.
Here there are two.
The trunk was about five meters.
So next time we're going to start with the hull, with a big source like this.
More prepared.