PULSERA EN HILO TECNICA NUDO DE SERPIENTE FACIL DE HACER

Hello friends, a very special hug for everyone and thank you for being on my channel. In this video tutorial I am going to teach you how to make this beautiful bracelet. We are going to use it step by step so that the exercise is easier for you. Well, without more to say, let's get started. Well, we are going to use these two pieces of thread first. We join the tips and with a lighter we are going to burn them. We join, we pull and as we see we make a tip. This with the purpose of introducing the beads or balls that I am going to show you here. Well, here we have the golden ball and we are going to introduce the tip, the pearl and the golden ball. Now what we are going to do is the following. Having this done, we are going to join the ends. Then we join the ends and we are going to do the following exercise. We are going to pull and as we see we roll the pearl and the ball towards the middle of the thread. And both parts are the same. Now we are going to place it in the following way and we are going to support it with a piece of tape. We are going to bring it closer and we stretch it down. Well, we are going to first use the thread on the right side and we are going to do the following exercise. We start the knot, we take the thread on the left side, we pass it underneath, we are going to stretch both sides. And here the knot has already started. We are going to take the knot to the glue of the golden ball up. Ready, we already have the first knot. We are going to do the other knot. Right side, we pass underneath, left side. This same exercise is going to be done for all the knots. It is the same exercise. Well, we are going to take it up and we glue the knot with the one above. We go back and repeat. Right side. We take the left side. Underneath. We take it up. Well. And as we see, it will be like this. This is going to be done successively. Until you have done from here to here, 7 centimeters. So, here I am going to explain the following. This same thing we did here, you are going to do it on the other side. This same thing you are going to do on the other side. Starting from the golden ball. And as we see, it will be like this. We are going to measure from here to here. Until we have done 15 centimeters. Now, we are going to measure from here to here, 10 centimeters. From here to here, 10 centimeters. And we are going to proceed to cut or cut here in the measure. We are going to have this here. We are going to remove it. Well. Now, we are going to take this whistle, sorbete or popote, as it is called in your country. With this we turn the coffee. And we are going to cut from here to here. 5 centimeters. This is in order to make the knot for the closure of the wrist. We take the thread. Or the threads. As follows. We hold. We are going to hold here. We take the tube. We put it on top, in the middle of the bracelet. We take the thread. We are going to leave a tip of approximately 5 or 6 centimeters. 6 centimeters. We put it here. And we are going to turn from right to left. Watch what I tell you. From right to left. We turn. We are going to turn. 5 turns. And we are going to introduce this tip here, where the tube is, as you can see. We pass it on the other side. We are going to pull. We take out the tube. And we are going to stretch both sides of the thread with which we made the knot. We stretch. And ready. And as we see here, we already have the closure. Now we are going to do the following. We are going to remove these two threads. That we have left over. We are going to remove these two pieces of thread. Remember that with this thread, or this thread, we made the knot. We are going to do the following. We cut, leaving a tip. Short note. We are going to burn this tip. We flatten it. In the shape of a pancake. As you can say. And we are going to stay this way. This same. We are going to do it on the other side. We burn. We flatten. And ready. As we see, we can close. And open. Good. We already have the bracelet ready here. Almost ready. And we are going to place. Some beads. Here at the ends. For that. We are going to cut here. To match. We burn. We join the tips. We pull. And as we see. We are going to stay this way. We introduce the golden ball. In this hole. We are going to burn here. We flatten. Be careful not to burn yourself. And as we see, look. It does not come out. This same procedure. We are going to do it on this side. And as we see. We are going to stay the following way. Well friends. Until here the video. Share, like, bye.