Несложно и невероятно красиво! Потрясающая идея чехол на машинку своими руками/stitch

I have such a machine and it came with a cover and now I want to replace this cover You see there are already holes here Well basically make a nice cover I also want to upholster the chair later because everything should shouldn't but just because I want beauty And well to make it nice for the eye even in one's own workshop I bought this fabric faux leather Now I'm going to quilt it make a cover for the machine and a chair You will watch yes as I do all of this Come on join in I cut off a small rectangle slightly bigger than the machine itself And now I'll sew it First I'll glue one piece here Well now I'll show you everything step by step I'm ironing it now using a layer of tracing paper baking paper and pressing it with this kind of layer This is "Aurora " It's called the material for quilting In short I want to make a quilted cover And now we'll all glue it together It's a long process I want to tell you while everything sticks It's already almost stuck And in this way I iron It's already stuck here Everything is stuck now Let's move on We are slowly moving the iron It's a pity I don't have such a narrow surface Then it would have been much simpler if it had been lying like this And so we slowly move forward with the catch Then I'll lower it down push that part and glue the next one So we slowly glue it together I set the ruler at a 45-degree angle Now I'll apply the tape along the ruler And so I will keep writing It didn't come out evenly Everything almost everything is prepared Now onto the machine and we start pulling it Now I'm stitching with a double needle I'm lining up with this tape and going straight The canvas is certainly large but I think it will look beautiful I will spend the time I will meditate sit like this and cry I'll trim the edge then cut it Now here's a double line that's formed Now we are laying down another row right next to it Just right on the sole Now we remove the tape We lay the row of stitches right next to each other And so we stitch everything until the entire piece is stitched This is the result of the fabric On one side I stitched in one direction Now I am marking with a ruler I place it this way so that the ruler is perpendicular to this line And I mark the line probably with an erasing marker I'm just going like this Exactly the same just like this I have a snag in some places The thread broke and two needles broke Well that's it for now And thus we steer the needle off the intended course To prevent the thread from breaking you must definitely wear this kind of cover There is a second thread in place and there is also one cover there Otherwise there will be all sorts of snags and torn items In general I only understand now This is the kind of carpet you could say a rather simple thing From this side it looks like this and from this side like that In short beauty Now here is our preparation This is a bandeau We place the pre-cut piece directly on the band Parrot are you shouting like that He doesn't want to It sticks In short that's how we put it together We hook with needles and continue stitching forward We keep pulling further even more so Now we sew from this side It turns out that we are stitching the entire fabric These are the squares we get There are no squares here yet I'm sorry that's all That's the result That's how many squares there are Squares Delightful squares Well from this side it is like that I walked a bit differently another way And let's move on Now we position the foot for sewing the zipper And we sew it into the tape We are starting On one side and on the other side Now we measure That's the whole thing I got 64 And we make the sides Cutting out We connect the middle to the middle And we start to sew in the side You may not see anything right now But I have a turn here We turn it And we still need to hem the bottom With a zigzag stitch It is positioned exactly like that on the machine Now we will process it with a bias binding Now I will apply a bias binding The machine simply impressed me That's how calmly it was sewing It just pleased me It went so easily through these places Now I'm going to fold all this I'll cut it now I'm bending it And here I'm stitching it I'll have a clean edge This is the cover The one we sewed together I showed you how I sew This is how it turned out Nice And also the fabric is lying This is on the chair And on the second chair Another cover for the machine Here for the neck This one is really terrible It's been long overdue to change