Thrift Store Modern - Thomas Johnson Antique Furniture Restoration

Thomas Johnson Antique Furniture Restoration
41 followers
39 Video Views·Dec 9, 2022
Tom Johnson of Thomas Johnson Antique Furniture Restoration in Gorham, Maine takes midcentury modern pieces found at local thrift stores from trash to treasure: Dansk kitchenware by Jens Quistgaard, and a small Herman Miller table designed by Charles and Ray Eames. Tom has been restoring furniture professionally since 1979. Visit our website at http://www.thomasjohnsonrestoration.com, call us at (207) 222-2266, or write us at [email protected]. And for those on the west coast looking for custom framing, be sure to check out Tom's daughter's shop, https://www.emcollier.com (@emcollierframes on Instagram).
I'm Tom Johnson, Thomas Johnson Antique Furniture Restoration in Gorham, Maine.
I've been to some thrift stores. As usual, there's a good mid-century modern
objects to be found. This is a really nice teak tray. It's designed by Jens Quitsgaard,
manufactured by Dansk in the late 50s or early 60s, and it's in really, really good condition.
Just needs to be cleaned up a bit. These are two really nice pieces of Coben-style enamelware.
They're also designed by Quitsgaard, and really, they're in fine shape, except for the handles
here. And this cute little table is designed by the Eames, manufactured by Herman Miller,
and the wire base seems fine. I've got to figure out what I can do about this top.
I think the first thing I'm going to do is start with these handles because they're going to need
a few days of finishing. They look really bad. My guess is that these were put in the dishwasher
probably a lot of times. So I'll start by sanding, and then I'll probably treat them
with some oxalic acid. It's funny, on this larger pot, the handle was just kind of wedged in there
someone had put fabric in there, and there's a little spike in there, but the smaller one
just screwed right off, and it has a threaded rod, you know, a threaded screw in the handle.
I can't imagine what would have happened or what happened to this one. There's still something in
there now. I may have forgotten to mention I'm sanding with 100 grit paper. That grain has
sanded off pretty quickly, but still I'm going to treat these with oxalic acid because I can still
see grayness deep into the grain, and oxalic acid is really good at taking out water stains.
It kind of depends on the wood, but we'll see if it works on these. Now I've heated up water
in the kettle this time as opposed to hot tap water because I want to mix up a strong solution.
I'm going to mix a couple of ounces of oxalic in eight ounces of water, which is a pretty strong
solution. All right, I'll let those dry completely. So I'm just coming in the shop after dinner to
give these a quick rinse, and you can see how much better the color is now. Okay, these have
dried overnight. Now I'm going to sand them as well as I can with 150 and then 220.
All right, I've done the 150, and now I'm going to sand really well with 220. It's important,
you know, because I'm sanding cross grain because it's a terrine. It's not getting stained or
anything, but I want to sand it really well with 220. I don't want there to be any sanding marks
on these. All right, I think that's good with the 220. Now I'll apply the first coat of finish,
and I'm going to finish these with the tung oil varnish. I think that's going to be a
great finish for these. It'll work well in a kitchen environment. Now these handles are,
of course, end grain, so the finish really soaks in. So I'll go back and apply a little more finish.
I want this first coat to really penetrate, especially here at the very top of the handle
where it really is end grain. And I'll come back and check this
every few minutes or so for 10 or 15 minutes and kind of keep applying it. All right,
these have dried now for a couple of days, and, you know, they feel a little sort of fuzzy. So
the next step I'm going to do, I'm going to apply another coat, but I'm going to wet sand it.
That's usually reserved for like oil finishes, and although this is a varnish, a tung oil varnish,
I'm treating it like an oil finish. So I'm going to take 600 black sandpaper and
dip it in the varnish and sand these knobs with it. All right, now I will wipe this coat off,
but just real gently. All right, so now to this table, and this is a tough one. This is a laminate
top. It's all scratched up very badly. I'm not quite sure what I should do about that,
but I have noticed there's some delamination occurring here on the bottom most level. So
I think I should take the base off and glue this down first. And while I'm doing that, I'll be
thinking about what we can do to the top. So I've discovered that this bottom piece of laminate,
it's loose all the way around on the edges. So I've cut a piece of MDF, medium density fiberboard,
which I'll use on the bottom here. And I think I'm going to use, since the laminate, you know,
is non-porous material, I think I'll use epoxy under there. And I'll clamp it down using this.
I do have the issue of the label. I poked around the label a little bit.
I don't think it wants to come off. I'm going to cut a hole in the MDF to go over it.
Also, I'm going to cover the edges of the MDF with some plastic packing tape so it won't stick.
You know, I put the coat on these handles about six hours ago, and I wiped it off,
treating it like an oil finish because I didn't want it to be too shiny. But even as it dries,
I don't like it. I like the color when it was wet. I'm going to brush a coat of the varnish on here
and leave it on. And I'll worry about the sheen later. All right, this has dried overnight.
Oh, that laminate's down fine. That worked great. I'm still a little unsure of what I'm going to do,
but I have an idea. But the first step, in any case, is to clean it. I'm going to use my,
just a commercial degreaser that I like using, and give it a good cleaning. Boy,
wouldn't it be great if it just stayed the way it was looking when it was wet.
But it's not going to. I mean, this has some bad scratches in it. They're not coming out.
You could make a case for maybe buying a piece of black laminate and re-laminating it. But anyway,
I'm not going to do that. In the meantime, I'm going to try some black shoe polish.
Hopefully, I have some. All right, I actually have some black shoe polish. I do have my
shoe polish kit from when I was a kid, and I do polish my shoes. But with brown,
I don't have any black shoes. To give you an idea how old this is, it still has a price tag on it,
and it was 36 cents. It does look really good. Obviously, the scratches aren't going anywhere,
but definitely, I like the sheen. Yeah, I think I'll go ahead and do the whole top.
I'm going to switch over to a white Scotch-Brite pad, just see how that works. All right,
I'm going to let this just dry overnight, and tomorrow, I'll see what we got. In the meantime,
the knobs are looking good. I want to give them another coat, a coat of satin. So,
I'm going to go over them really well with a Scotch-Brite gray pad. Wipe these off with a
little bit of paint thinner. Now, this is the same tung oil finish, but it's a satin. All right,
these have dried overnight. These look good. I'm going to wax this one more time. I used the
shoe polish on it, and now I'm going to use this bowling alley wax. I figure that's the
toughest wax I probably have, and since this is the tabletop, that should work fine. All right,
I'll let this dry for a while, and I'll sort of buff it out again. It feels really smooth,
and it looks good. Now, back to the handles and the saucepans. Now, I'm going to rub these out
with some steel wool and polish, but first, I want to install them. If you remember this large one,
it doesn't have a screw in there. It never did because it's flat on one side, but it fit in
there, but it's loose, so I've got to do something to tighten that up. This is veneer scraps,
and I want something really thin. I'll try this. Try a piece here to see if we're on the
right track. Yeah, maybe just a few of these. I notice this little thing in here is loose.
What the heck is that? It's a furniture glide. Okay, I think that's going to work well,
so I'll redo it. I think I need maybe one more of a really skinny shim. You know, I was able to
pull that out. I want to put it in. I want it to be so tight that I cannot pull it out,
and of course, a screw goes in at the end, but I want it to be really tight. I just want to get
this wood under that lip. All right, that worked out well. It's nice and tight. The small one,
I don't think is an issue. It screws on. I just got to make sure that it lines up
with the hole that's already in the bottom there. All right, now I want to reinstall the top
with its base. A little bit of epoxy on the underside here. A little alcohol to take off that
remainder. All right, so now we'll tackle the tray. First things, I got to get these stickers
off. I still have the stickers on the bottom of here, too. So on something like this that's metal,
boy, they're really stuck on there. I'll try some of this Goo Gone stuff. So let it soak for a
little while. I don't know if it's soaking through the paper or not, but you can move the liquid
under the sticker here. Still left a bunch of adhesive here. I think the Goo Gone will
take it right off. Oh yeah. Of course, another way to get stickers off is with the good old
heat gun. Just a little bit of residue left after the heat, but most of it came off.
And the stickers were hiding the Dansk label. Now these stickers are different. Now I'm ready
to move on to the orange oil and beeswax polish. This piece is in pretty good shape,
so I'm going to go over it with four zero steel wool in the polish. Let's see how it works on this
tray. We'll let the oil sit on that for a little while. These little paint specks are maddening.
I'll see if I can nick it. So there you go. These are just great, you know, objects by some heavy
hitter mid-century designers. Picked them up for under 20 bucks at the local thrift stores,
and they're just beautiful and ready for years more of service. I think they look pretty good.
