Dumpster Bow -- (WiLL IT BOW)

Kramer Ammons
208 followers
😏
Links to my archery business are below if you are interested.
Handmade High-Quality Traditional Archery Gear
👉 https://www.shatterproofarchery.com/
Shatterproof Archery Amazon StoreFront
👉 https://geni.us/Shatterproofamazonshop
Shatterproof Archery Youtube Channel
👉https://www.youtube.com/c/ShatterproofArchery
#kramerammons
#bowmaking
#traditionalarchery
Will it Bow is a series where I take unsuspected items and make a bow out of them.
We've already done a pallet so today we're doing dumpster.
That was a terrible idea. So we're gonna take whatever we can find out of the dumpster
and make a bow. Okay what's this?
It's like we got an old fence post. MDF pine rubber. I haven't thought about this challenge
at all yet so I'm trying to think like can I melt anything down like what can I do here.
I'm gonna start with this.
Okay now that bends.
This might work. So that'd be the back. I know it's the next day but I'm going back to that
same dumpster because I remembered something that I think we can use. Oh it's still here
and a muffler. I want some of this rubber. I think this is the jackpot. I think we got
everything we need. So the dumpster dive is apparently more fruitful than I thought because
the more I think about it is this thing, this garden landscaping edging possibly is PVC.
And PVC could be a really good backing if I can clean that up and secure it with some sort of glue
to our fence post. With the exception of the fact that I'm trying to make a bow out of
some trash I see a couple of foreseeable problems possibly. One is that this fence
post is like lighter than a fence post should be. That's very light. What do you think it is?
Should weigh it's probably five pounds. Uh 11. I think it's 11. 9 pounds 12 ounces.
I hope it has some structural integrity is what I'm trying to say. The second thing is you can
see it's it's not super tall and it's it's it's rotted. I don't know if this will work.
So task number one is to take this clean it up and start cleaning up the fence post. We do have
a clear direction of the growth ring so I'll grab my draw knife and get to work on both of those.
Let's get into this. Okay we've got this cleaned up to start working on it. We've got some defects
we're gonna have to cut around but I'm gonna cut as big of a section maybe a two inch section
maybe a one and a half inch section. We'll see as big as I can and we'll cut a strip out.
Okay so we're in pretty good shape here. We just got that one hole.
We've got about an inch and three quarters inch and a half of working material.
We're gonna make it work. Now it's time to grab the draw knife. Oh yeah baby. And I'm going to
just cut cut out this bow out of this one piece of wood. I shouldn't have to add anything to it
if all works out good. And oh almost knocked that on me. And so let's chuck this up in the vice
and get to carving.
Oh this is a thrill.
Uh so we got a problem going on here. This fence post is so
old and so dry it's just chipping out massive chucks. Like I barely grab it
and the grain so on look at that the grain so uneven. Oh my goodness this is like a sponge.
This is like cork. This is a rotten fence post. I think I'm gonna have to train train or actually
change strategy here. What we're going to do is use different methods because the grain is very
uneven. It looked decent on the end but as I get along there's lots of knots. One, two, three,
four. There's screw holes. There's all sorts of mess. So we are going to do what you shouldn't
do when building a bone. We're going to work against the grain and we're going to sand it
down. We're going to shape it. We're going to carve it down and put that garden edging backing on.
Yeah yeah to follow that. Try to follow the growth ring here.
I think I'm going to be able to use it like that. The one thing I'm slightly concerned about
is this hole but let's go throw this in the heat box and if this is the material I think it is
it will mold and shape with just a little bit of heat very easily and so we can heat it up.
We can mold it to the back of this and then let it cool and then we can glue it up and add pressure
and it should hopefully give us the best results that way.
Wrap it in some plastic wrap and then from there we can use the bike tires.
This plastic wrap is just here to keep the glue from gluing the bike tires.
Same sauna we go. Okay it's time to pull this out of the heat box now. Here soon we're going to
find out if this works or not. Okay I'm slightly frustrated. Let me show you what happened.
We've got our heat box right here and these two chicken coop bulbs are hotter than the
reptile heat lamp bulbs which is hotter than the baseboard heater. So right underneath both of these
is the hottest part. That's right where I put the bow. Now look over here. The same distance apart
I think it's the bike tire that melted here and created these spots and I was trying to pry this
off. I don't know what it is. Just leave it on. It'll be your handle. It's the bike tire melted.
I told you to leave it on. The glue did not stick to the PVC like at all but we're not going to give
up until it snaps. So I've got a couple ideas which include going back to the dumpster but
before I go back to the dumpster let's start shaping this down. I'm going to lay it out for
where I want the handle. Clearly we need to bring this down super thin so we have bending limbs
and it's going to shoot like this. I'll work on cheering my mood up and then we'll try to make
this work. I realized something. This is falling apart and then I realized something else. That's
okay because I've got enough material here that I would love to take this off because the EA40
didn't work. Clean it up and try a different kind of glue.
We'll have to hold the backing on. It doesn't. So if I'm pretty Taylor
rappy rappy rappy with the shrieky shrieky shrieky then we might get a flingy flingy flingy.
We're gonna leave this over the weekend and I'm gonna come back to it. Sweet we are going to be
able to finish up the willow bow today. Who did this? Cass who did this? Did what? This clamping
job. Pretty sure I videoed you doing it. I did this? Pretty sure. No this sucks.
You're really gonna leave that one on there? It's in the spot that it's gonna break if it breaks.
Just a little just a little disaster. Let me explain my dilemma. I've got this
this backing on. The problem with this backing is I do not trust it to stay on. It's not holding
glue well. So I had the idea of using this pallet wrap to wrap it on to hopefully hold those things
together tight enough that it would shoot. Now the problem is if I wrap it with plastic wrap
I can no longer remove any wood which means I can't tiller it. So I think what I'm going to do
is floor tiller this as good as I can and get it as close as I think that will be a good tiller
especially getting the limbs as even as possible. Then I'm gonna plastic wrap this super tight
and then put a string on it. I'm getting more and more confident every second. Daddy check it out
we've got this trash bow that could actually provide us a lot of fun. Oh boy. Did it crack?
No that's plastic wrap. That's going awfully far.
What was that? The compressions made these like air bubbles.
Okay so this is the top one. It's an inch longer. Shall we shoot it?
Check it out. Here is the trash and here is the bow. The bow from the trash. We've got the safety
goggles on because you care about my safety. Let's shoot this bow. We've got our safety goggles
on. We've got our trash bow. Let's see if it really is. I never do this. This is this is the dumpster
bow. I can't. I can't do a full draw. I wouldn't. Do a full draw later. You gotta do a half draw first.
Oh it will blow. You're really gonna leave that one on there? It's in the spot that it's gonna
break if it breaks. Oh just a little disaster. Where are you quitting? That's why we leave the trash
in the trash. Wait in the what a blow gun. After second thought I've been going about this all
the wrong way. Load the arrow.
Will it blow? Let's go!
