I love having a new bottle of glue! Because it’s full, just a bit of a squeeze dispenses the glue. Even better than that is the clean tip and how easy and cleanly the glue flows out.
It’s not too long though before the tip becomes hard to open, and there just isn’t very much to grip it with. Confession time. I’ve resorted to extreme measures like pliers and even, um, clenching the darn thing between my teeth to pull the tip open.
All this is no good for the dental work, or for the bottle. Not too many times of doing this, and you’ve got a mangled glue spout that can’t do its job very well.
In this episode, I’ll show you a quick little handle you make from a scrap of wood that works like magic. I saw this tip in a woodworking magazine and knew right away it was a great solution to a problem plagues many of us. It’s so simple, you should make several of them at one time so you always have one in reach.
Why does it work so well? Because it lifts the tip from underneath and gives you lots of leverage while not distorting the tip. I’ve used this handy little device not only to open the tip for dispensing, but also for complete removal when the channel inside needs dried glue removed so it will work like new again. This is simply too simple, cost-effective and good to pass up.
Besides, your teeth will thank you.
Hey, Dirt Farmer Jay here from DirtFarmerJay.com. I've got a quick tip for you today. You know,
the glue manufacturers, especially my friends over at Titebond, have done a pretty good job
with these tips. The problem is, sometimes when you go to use them, they're hard to get a hold
of, they get stuck, and you finally get that thing open and closing. There's got to be a better way.
Well, let me show you what it is. Hey, Dirt Farmer Jay here from DirtFarmerJay.com. Thanks for joining
me today. You know, when it comes time to open and close these types of bottles, sometimes they're
kind of hard to get a hold of and to close, and that just happened right there, and that's a pretty
new bottle right there. Well, I'd like to give credit where credit is due, but I can't remember
exactly who said this or showed this tip, but was in one of my mags that I really like to read,
either fine woodworking or woodsmith, but somebody came up with this great little handle that all
they did is drill a five-eighths inch hole in a little piece of waste wood like this,
and then cut a notch here, rounded the ends here, and notice what happens. That fits right under
there, and it becomes really easy to pull that up, as well as close it. So, you can make a bunch of
these, which I have, and keep them around wherever I'm gluing up, and the next time I need to access
that bottle, I can really get a grip and increase my leverage. Simply grip it. There it is. Really
easy. Hey, if you found this to be helpful, or you have something like this that you can pass along
to the rest of our viewers, we'd love to share it, write about it in the comments below, and if you
found this to be helpful, won't you like the video, and better yet, subscribe to our channel
by clicking on the subscribe button, and be sure to ring the bell, and that way you'll get immediate
notification the next time we put out one of the great adventures we get to enjoy around here
in the shop, the kitchen, out on truck life, or just great product reviews from the home and
garden, things that you really use. Until the next time, this is Dirt Farmer Jay from DirtFarmerJay.com