enseigne lumineuse Louis vuitton

La-Malle-en-coin
79 followers
6 Video Views·Feb 23, 2023
Welcome to Malencoin
Today how was this Louis Vuitton sign built
She is made to decorate our workshop The
first thing we did was cut a oak board
It is an oak board from the Agneau forest our town
It is a board that should be 2.5 meters long 3 meters in length
They will be cut into 50-centimeter pieces
We want to end up with a panel that is 3 centimeters thick
50 centimeters by 50 centimeters
So we had to take a little bit more
On work the entire thing
Our goal is to have two perfectly straight and square fields so that they can be joined together
Then here I am assembling some Festools dominoes
I will not explain how it works
It is a machine that allows you to make mortises and add small pieces of wood called dowels
Allowing boards to be assembled together
There are experts on YouTube who explain it to you in great detail
The advantage of dominoes laminates and various systems
The goal of the game is simply to strengthen the assembly of the whole
When you tighten a panel as tightly as that always remember to put the clamps in the opposite direction
To prevent all this from flying up and hitting you in the head
Make sure to wipe away the glue everywhere
Once that is done remove the glue Make sure the panel is straight
A little trimming
Previously we had made a template using a drawing
A small cutout on a medium panel that will serve as our model to cut out our logo as we desire
So six sauté pans with two
blades One blade for straight cuts and one wide blade
I remind you that the oak is 3 cm thick
The blade tends to drift slightly off course
That's why having a wide blade is useful for straight lines
And a very fine blade allows for easy turning for all curves
Then it's going well There's no particular difficulty
You need to follow the line
So avoid drinking before
When setting your piece be careful not to cut into the workbench beneath it
It works well And this is what it looks like
So once that's done just a good sanding
So it was sanded with 60 80 and 120 grit
The most annoying thing is the fields
Once I did that I did a small sanding with an orbital
sander This makes it easier to access the fields
And I finished it by hand with 240
Then you can't see it on the video but all the edges of the letters top and bottom
They were planed again on a reference block to be a bit more parallel
Then with the router since it's something
fairly simple we didn't do a very complex setup
Just the two of them one holds the rule
The other breaks it
We are breaking through to get past the light beams
By focusing on properly navigating the track with its curves
The positioning of food
Here we cut a panel always from oak
But it is an oak that has been placed in ovens at 200 degrees
Where does this color come from which resembles a drowned color
It is an oak that is very fragile which breaks very easily
Then we cut small brass fittings
These are tubes through which screws will be passed
And also the electricity of the band
We will pierce the back of the panel
We surveyed the tubes that we are going to install
On reperce
Then we go back
And we position the countersinks so that the screws are invisible
Here are our brass tubes
Steel spacers in fact
We will now position the logo on the crossbar
No major difficulty for this kind of thing
Except for the positioning of the wire in the brass tube at the same time as the screw
It is obviously necessary to avoid crushing the wire
Then they made a hole on the spot
Then a small push of the threader to pass the thread
A hot kiss
A final sanding
Obviously we check that the electricity is working
There a small pass to bevel
A little sanding
Here we are at 240
To remove small stains
Then I rubbed it all with wax oil
It helps protect the wood
To nourish it
And it retains its original color in the wood
That's exactly what I wanted
I think it enhances the contrasts
Here we need to apply a second layer
Here only one layer has been applied
Similarly the entire thing needs to be polished
Then with a brush with a drill
This is what it will look like I
hope this project has entertained you as much
as it has entertained us
Don't hesitate to ask questions leave
comments Subscribe
And hoping that this small logo will remind you of our restoration work
Mainly on juiton obviously
