Cận cảnh DJI Terra máy bay không người lái lập bảng đồ thời gian thực và tái thiết lập 2D

Welcome to the video of how to use DJI Terra DJI Terra is designed to set up a map and set up an automatic flight plan It can create 2D maps in real time Or re-create a 2D-3D map with high accuracy by Entering the original image In this video We will show you how to use DJI Terra to set up a map and re-create a 2D map Before you start Make sure your PC accessories And the hardware related to meet the requirements of the map Download and install the DJI Terra software Log in to DJI Terra with the current DJI account or register a new account If you haven't bought the license Feel free to contact the agent to buy them Connect the remote control of the aircraft to the PC Place the aircraft in an outdoor environment Turn on the aircraft Turn on the remote control of the Phantom 4JTK Launch the DJI GS-JTK application Go to the general settings Then click on the network prediction To ensure that the 4G network of the aircraft can connect normally Go to the JTK installation Activate the JTK function And select the JTK network as the JTK service type Return to the active interface And make sure that the JTK function is active Connect the C port of the remote control to the PC via the cable For Phantom 4 X-band or Phantom 4 Pro First, connect the remote control to the PC via the micro USB cable Switch the remote control to PC mode Disconnect the cable and then restart the remote control Connect the remote control to the PC via the USB cable When using the remote control next time If the remote control has been switched to PC mode You can skip this step Users can connect the remote control to the PC via the USB cable directly After the remote control is successfully connected to the DJI Terra DJI Terra will display the location and status of the aircraft Now let's start setting up the map mission plan Log in to the new task, then select map Edit the task name or use the default name Log in to OK, go to the flight path setting screen Select the area to set up the map on the map Then the system will automatically create flights Set the route number on the right menu Click the 2D timelapse map If you need to set up a timelapse map on the flight The action to complete the default is to wait Users can change this setting according to their situation The height of the default mission is 100m Should use the default speed Should use the default takeoff and landing ratio in the height setting For Phantom 4ZTK I turn off the non-division function Attach the SD card to the aircraft After the parameters are set, click on Start To ensure successful landing I carefully read the check list After the flight paths are displayed Click on the start flight button displayed in the flight preparation message The aircraft is now performing the flight mission The aircraft begins to take pictures after reaching the first sighting point And the time-lapse image will gradually appear After completing the mission DVI Terra will process the image And the aircraft will return to the main point and land After the image is processed The 2D timelapse of the area will be displayed on the map Next, we will introduce the 2D timelapse map Go to a mission that does not include the mission to set up the map Go to the map or create a new mission to set up the map And go to the map and put it in the remake page Attach the microSD card of the aircraft to the PC card slot Insert the image Add the image taken in the mission from the microSD card Click on the arrow next to it to open the image list Insert the mouse into the image name to view the image Insert into the manager to select and delete the image Select 2D map as the remake type Then select the map setting as the actual map setting condition The actual map setting refers to an area with a relatively even height For example, rice fields or rice fields in the east The urban map setting screen refers to areas with high-rise buildings The fruit tree map setting refers to the fruit tree garden There may be a big change in height Then select the resolution The higher the resolution, the more time it takes to recreate Click on Restart After the reconstruction DVI Terra will display the 2D direct image created by recreating 2D After inserting into the mouse and measuring the scale The user can measure the distance and area of ​​the map that has been recreated The user can insert into agriculture Set up the flight plan of the unmanned aircraft on the map that has been recreated In addition, the user can export the quality report to find out the building quality of the model