Tưới thuốc kích rễ phục hồi sầu riêng còi cọc, chậm lớn | phần 3

SỐNG CÙNG NHÀ VƯỜN
14 người theo dõi
10 thg 10, 2023
Tư vấn kỹ thuật: 0939.051.123 - 0868.661.600
I'm going to water the rejuvenation plant.
Mr. Sang said he was going to leave this plant, so I'm going to water it.
He said that if I leave this plant, I won't be able to take care of it anymore.
But now I'm going to take care of it. I have my medicine here.
Here, this is a product from Kèm Xanh.
It has been used for a lot of times.
And this is the rejuvenation plant.
It has amino acids, organic, white blood cells.
This is a special product from Kèm Xanh.
It has a lot of magnesium, which helps to nurture the leaves and create new roots.
As you can see, these are the products that we are going to water.
The same as the product from Kèm Xanh, we are going to mix 10 liters of water.
A small spoon like this.
For the rejuvenation plant, we are going to mix 1 liter of water with 300 liters of water.
10 liters of water is equal to 30 cc.
We are going to mix it.
How are we going to water it?
We are going to water 2 plants.
We are going to mix 60 cc of rejuvenation plant with 2 small spoons from Kèm Xanh.
There is no fan here.
This is the middle of the field, so there is nothing we can do.
We don't have a fan box, we have this one.
We are going to mix the rejuvenation plant first.
The powder is mixed first, the water is mixed later.
That's the rule until now.
It's the same as the spoon.
For the spoon, we are going to use this lid.
We are going to mix 1 spoon of water.
Not a spoon, because this lid is a bit big.
Here, we water it.
We are going to put it here.
1 spoon of water is 10 liters.
2 spoons of water is 20 liters.
This box is 20 liters.
We are going to mix it.
1 lid is 30 cc.
2 lids are 60 cc.
That's 20 liters.
We are going to water it.
Give me the lid.
The water will come down.
We water a lot outside.
We water less inside.
10 liters is enough.
This is the middle of the field, so there is nothing we can do.
We should have a fan box.
We water it.
It's too far from the place where we have the equipment.
We water it.
If it rains, we don't water it.
If it doesn't rain tomorrow,
we will water it.
The water will come down.
That's enough.
Let's move to another tree.
Wait a minute.
After watering it,
we will keep it like this.
In the afternoon or tomorrow,
we can spray it with medicine.
We can spray it on rice.
We can spray it on leaves.
We can spray it on amino acids of Spain and Turkey.
We can spray it on leaves.
This is how we do it.
Put it here.
This is how we water the revival products.
In Mr. Sang's durian garden.
When we go,
there are some areas where we bring the product.
For your reference.
These products are processed by Mr. Sang.
You can see it.
We will water the heavy trees.
You can see it.
Mr. Sang said he planted the trees next to it.
He left those trees.
We will water the revival products.
Because in a month,
we only water one tree.
Especially for the heavy trees,
we can't water them all at once.
It's the same for any medicine.
The normal trees are like this.
The ratio is very even.
The trees that we process are light.
This tree is good.
Let's water it.
There is only one tree left.
Why don't you water that tree?
Let's water it.
Let's water three trees.
Let's water it.
Let's go down here.
Let's look at this tree.
This tree.
This is one of the trees
that Mr. Sang is going to leave.
It's dry.
See?
It's dry.
It will definitely go away.
But Mr. Sang will process it
for a month.
It's covered in mold.
It's beautiful.
It's a very heavy tree.
We can't process it at once.
We have to water it 2 to 3 times.
I'll replace this tree
I was going to use this one to replace the other one.
I thought it was dead.
So now, I've watered the 2 plants.
The new one is also growing.
And the new one, the new one is also growing.
The new one is also growing.
It's growing well.
Let's go over here.
It's growing.
It has a stem like this.
It's dry.
After processing,
as you can see, it's growing.
I've watered the green one and the red one.
It's very bright.
It's very beautiful.
It's very good at restoring the plant.
If you look at the dry spot,
you can see the pattern.
The skin is bad.
After processing,
it's restoring to the red color.
Here, it's still growing.
After processing,
it's restoring to the red color.
Let's water this one as well.
Here are the normal plants.
These are the normal plants.
As you can see,
the color is very beautiful.
Here, Mr. Tinh
is watering
the super-heavy plant.
We'll do the super-heavy plant again.
We'll use the
strong sprayer
to restore it.
It's dry.
Let's water the new plant.
We'll get two plants.
The super-heavy plant is dying.
It's restoring very fast.
It's very fast.
We don't have enough water.
We'll water the super-heavy plant.
It's raining at night.
Yes.
Which one is slow?
The small plants are growing.
How many plants are here?
These plants are okay.
Let's walk around
and see which plants
are still slow.
Here are the plants
that have been processed.
Most of them are
growing very well.
The plants that
Mr. Truc didn't water are growing well.
The wind is strong.
This one?
This one is dead.
This one is slow.
Let's process this one.
We'll go to this one.
Phat is going to repot this plant.
It's sprouting.
Phat is repotting a new plant.
Can you see it?
It's restoring very fast.
We can see the new leaves
on the super-heavy plant.
It's dry.
It's sprouting a new plant.
It's beautiful.
It's dead.
If it's too dry,
we can't water it
because it's dead.
But if it's still fresh,
we can water it
and sprout a new plant.
Here are the new leaves.
That's the outstanding effect
of the repotting process.
The reason why we process
organic products
is because we can
get a big profit.
Look at the bottom.
It's very even.
I wish you success.
