[Tự làm thác nước cây thông Noel cho mùa Giáng Sinh

Hello everyone, Christmas is coming, today I will use the old wheel to make a very unique Christmas tree. Let's follow me! First, I clean the wheel. Use cement and sandpaper to make the bottom of the base. Next, I cut a piece of PVC plastic pipe and connect the small pieces of PVC plastic pipe together. I always use PVC plastic pipes. Do the same with the remaining PVC pipes, but bigger. Now I pour the cement inside the small PVC pipe and place the large PVC pipes outside it in turn. After the cement has dried, I remove the remaining cement outside the PVC pipe. I apply a layer of gray paint to cover the entire PVC pipe. Cut the flower stem into the shape of a plastic basket. Draw a circle from the PVC pipe in the middle of the stem and cut it off. I put a piece of cloth on the stem and cut it into the shape of a stem. I dip a piece of cloth in cement. Then put a piece of cloth on the stem and spray cement on it. I install the LED system below the stem. Do the same with the remaining floors, but smaller. Finally, put the floors and PVC pipes in turn. Connect the power lines and install the pump in the basin. Pump water into the basin and soak the basin for 3 days. I spread the stones on the floors. After 3 days, I pour water into the basin. Spread the straws at the bottom and pump new water into the basin. Add a Christmas tree around the fish tank. And put the fish in the basin. So, our Christmas tree fish tank has been completed. The atmosphere of Christmas has spread to the whole country. I wish you a safe and happy Christmas season. Don't forget to subscribe, share and leave comments below for me to know. Thank you for watching the video. Goodbye and see you in the next video.