Compressor Review

DirtFarmerJay
310 followers
1 Video View·Dec 28, 2023
Hey, Dirt Farmer Jay here from DirtFarmerJay.com.
We have recently upgraded the air compressor in our shop
with the DEWALT DXC-M303.
It is a great little compressor,
but we're gonna walk you through our initial impressions
and some of the features on it.
Hey, stick with me.
Hey, Dirt Farmer Jay here from DirtFarmerJay.com.
So far, we are loving this DEWALT DXC-M303
vertical tank compressor.
Now, there's some features on this
that I wanna mention to you and also some clarification.
There's a little bit of confusion
about whether this is a single-stage
or two-stage compressor.
It is a single-stage compressor.
It has dual pistons here in the air pump,
but it is single-stage.
That is, just in one rotation or cycle,
air is both brought in and pressurized
and then put into the tank for delivery to the tools
using a regulator and all that,
or for whatever work you've got this attached to.
So it is single-stage.
One thing I really like about this compressor
is that it is oil lubricated on the air pump.
So there's a nice, sizable sump right here.
This is where you go ahead and fill it.
This is where you drain it from, and that's really easy.
The air filter unit is right on the side here,
easy to access, to clean.
It has a nice, sizable cooling fan that is aluminum,
so it is easier for the unit to start it
and to get the air going,
so it's less drag on the startup
when the capacitors kick in and the motor starts up.
You get an easier, smoother startup.
Full cage around all the components here
to keep me and visitors to the shop safe,
and so that is very nice.
The fit and finish on the unit looks to be very nice.
Has its standard control, an on and off valve,
plus the pressure tank indicator, which is standard,
but also the regulator that is then attached
to a standard connector, quick-connect hose,
which I've just put regular compressor hose,
and you can see I've got air in it right now.
So all that's nice.
By its very design, you have to be careful with these,
though, they're top-heavy.
The majority of the weight on this is all on the very top,
so when you do roll and transport,
if I took this and rocked it forward,
I'd have trouble controlling it.
I'm on the wrong side of it.
It'd want to tip, want to dump over on its side,
so when you're rolling around or putting it in position,
you want to be very careful.
It's got nice pneumatic tires.
However, and we'll show this in a future episode,
this is gonna be mounted around the corner behind me
in a separate little room up on a platform
that makes it easier to do a couple things.
One is to change out the air filter here,
but most importantly is to drain the tank,
this tank, ongoing of any water that's built up,
and that is very important because corrosion of the tank
can lead to catastrophic tank failure,
which can mean injury or even, unfortunately, death.
So what you want to make sure is
that this tank is drained regularly.
Putting it up on a platform
is gonna make it easier to do that
instead of having to get down on my hands and knees,
reach under and locate that valve
and blow out the water of it ongoing.
So those are some couple things that we like right off.
Price point for this unit.
This is about a $600 unit
if you buy it at Tractor Supply Company.
I found that it was right at 599 plus tax.
Elsewhere, it could be 100 to $300 more
for exactly the same unit,
and I'm talking exactly the same unit.
When I picked it up from Tractor Supply,
they had it in stock near our home,
was able to take it home the same day that I wanted it,
and it was fully assembled,
ready to go, and ready to put to work.
When you start up this unit,
after the first 20 hours, you need to change out the oil,
and you want to use compressor oil.
Check out this video where we tell you about
why it's important to actually use dedicated compressor oil
and not regular motor oil.
We'll explain that in that other video
and not take time to do that right now.
Another thing that you would be interested
in knowing about on this is the horsepower on this, or RPM.
This is a 3450 motor.
It's a single phase, 60 hertz,
and it is made in China by MAT Industries,
M-A-T Industries dot com.
As far as horsepower goes, it's two horsepower,
so it's a nice motor startup.
If, for some reason, you overload or overtax this,
and it needs to shut down or overheat,
you can shut it off using the standard control here,
and there's a reset button there to start it all over again.
As much as I like this compressor,
and it looks like it's well-made,
I do want to take exception with DeWalt
and some other manufacturers
that seems to be very common practice,
and that is to emblazon tools
with this huge made-in-the-USA logo,
but right below it with global materials
or something to that like.
This is a workaround, meaning that many of the components
on the machine are actually sourced
usually from Asia and China,
and that's certainly the case
on this particular compressor.
If you look right on the motor,
it says completely made by M-A-T Industries, made in China.
Worse yet, if I go down to Home Depot
and look at their alternative to this compressor,
they have a compressor that is identical to this one
under the Husky brand with a different paint job,
identical down to the motor,
the placard on the motor, and the manufacturer.
So Husky, DeWalt, other major tool manufacturers
that are embracing this practice, it's offensive.
To do that and say it is assembled here
like that's a big deal,
I'm gonna challenge you and ask you to start on-shoring
as much possible manufacturing
and support the American worker base,
the technology, and citizens here directly.
I understand it's difficult to get parts a lot of times
or to do it economically, but guys, you've got enough money.
You can start resourcing back in
and maybe building some manufacturing plants
where you do this directly.
It would sure be honoring to the American worker
and to us as citizens if you do so.
And meanwhile, this is pretty disingenuous,
these little tags just put made in the U.S. huge
with little global.
If you're gonna be honest,
assembled from global parts in the United States of America
would be much more honest and less offensive
to other tradespeople, craftspeople, and hobbyists
like myself.
Well, that's enough of the soap box here.
There are three other areas on this compressor
that I think can benefit with some aftermarket accessories.
One is the air filter.
The secondly is to drain this
where we're draining the oil sump,
making that easier to open and close the valve on that.
And the last one is making it easier
to drain the water out of the air tank
with a more convenient valve system.
Check out this video right above
where we'll show you where to get all three
of those accessories and how easy they are to install.
You know, something else that people get really curious
about with air compressors is what's the difference
between an oil-lubricated air compressor and an oil-less.
Well, check out this video
where we do a side-by-side comparison
of an oil-less and oil-lubricated air compressor,
including the sound output
and how the two different machines run.
You'll walk away a lot smarter about air compressors.
And then check out this other video
that YouTube thinks you're really interested in,
and we hope so too.
You'll enjoy it.
In the meanwhile, this is Dirt Farmer Jay,
enjoying this beautiful new compressor.
