【修理】WE G18C GBB 的擊錘卡不住導致滑套拆不下來之解決方案

Hi there, I am NoYoC Don't forget to leave the comments to me after watching the video for any ideas and Airsoft experiences I will introduce about the thing About the slide can't be removed after the hammer is not able to be cocked The main purpose of this video is talking about remove the slide while encountering this issue About fix the hammer of WE G18C GBB, it will be introduced in the future For the persons who know about Glock series, you may already understand it's the built-in hammer So you almost not see any difference on the appearance Let's check what's the issue on it first The trigger is cocked after pulling back the slide But it seems like no reaction while pulling the trigger That means the hammer doesn't work correctly by pulling the trigger Let's check it in different angle Do you see the silver part in the gap? If don't, that means the hammer doesn't get cocked Let's pull the slide once Still no Pull again Still no again In order to remove the slide, the hammer must be cocked first It can't be removed at present What should I do for it now? No problem! Just provide a simple way to remove the slide if the hammer is not able to be cocked First of all, you need find out a piece of the object which pretty thin and tough The tickness at least can be inserted into the gap of the slide In my case, I got a piece of the plastic The plastic will be used by creating the bags by my mom And this is the offcuts It's simple to use it Lock back the slide first Then turning the pistol upside down Put the piece of the plastic above the slide The depth is up to you Then forwarding the slide while holding the slide and the piece of the plastic You may noticed the piece of the plastic is also getting into the slide Let's turn the pistol upside down again Remember, the piece of the plastic must not be dropped or pull it off Let's take apart the sllide The slide should be taken apart easily You can do anything you want for now I was referring to the overseas video But he was using the tissues to fill the back of the nozzle fully The success rate is depending on the back of the nozzle is filled the tissues enough Generally, it's wasting because the tissues almost not be able to re-use Anyway, I was not intended to find the solution on this issue at that time Because my hammer of the handgun can still be cocked I've suddenly figured this method out when my hammer of the handgun is not able to be cocked It's much efficiency, so I decided to share this to everyone So you can solve the issue yourself Okay, this video is coming to the end Don't forget to leave the comments below to tell us about your ideas and Airsoft experiences If you really love my video, you can subscribe my channel Then lit up the bell next to the subscribe button If you would like to follow my news, you can find my Facebook fan page in the video descriptions So you may not miss anything from me! Hope I can see you in the next video I am NoYoC