Bathroom FAUCET UNBOXING and HOW TO install bathroom faucet and drain stop EASY DIY

all righty my friends welcome to another unboxing and installation video I'm checking out this heran leadfree 4in Basin faucet with popup drain comes the little instructions there should be fairly straightforward comes with this nice little bag here good protection on that and that looks pretty cool nice black matte finish there hot and cold little red and blue indicators this looks pretty nice comes with our water hoses and a little popup drain here that is nice nice mat that black finish there too okay let's go install this and show you guys how it works Hello friends okay here we go so first I'm just going to install this our faucet is out and our drain plug so this is just going to slide down there make sure that this um washer here is right here and you put that right down in the sink make sure everything's clean out of the sink get a paper towel or something SP wipe that up real good there we are okay and then this just goes in here should go right down in there nicely unless what is holding us up here this seems to be just a little bit big there okay for whatever reason this had like a little bu little edge here on there so I just took my Razor and just kind of scraped around there and now it fits down there just fine okay now we go underneath the sink okay we are on a Time Clock as you see my things are dripping a little bit here so this I'm just going to put this pipe actually we have our bottom seal first so this one goes up towards the bottom here like that and then you want to put this up there too and that's going to screw up under there and that's going to pull that down into place nicely first of all I want actually to get my other pipe on here so that goes on here underneath there and then we have this one that goes down like that onto there that screws down onto that like that okay we can tighten that down okay now that that's that just going to clean this up a little bit get the goop off off of there good to go now for this we simply let me get the goop off of there too okay I will just screw this up onto there righty tidy Lefty locy okay so that's going to go up there like this that top part should be snugging down on there and you can nice tighten it up real good there I don't want it leaking there we are okay so that's in now uh we should just be able to uh replace our faucet now and with the faucet we're just going to take these off and these are going to go up underneath our sink there so there's one comes off nicely get the other one off and we're going to go above the sink and plus place that down on top okay so this can just go down right here make sure this is kind of cleaned off and smooth and this goes down right on top of that just like that looks great try to Center those as much as possible then we go back underneath okay there we are with those kind of on there make sure our sink is as straight as we can get it then I'm just kind of holding the faucet of the top so when I push on this it doesn't push it out and just kind of tightening that down not all the way I want to get my other one on there first too and then I want to go up top and before I tighten those down I want to make sure that that is centered as much as possible okay that looks really good so now that I'm happy with the centering I can just tighten these down okay there's one okay should be snug enough there just hand tighten I'm pretty happy with that okay next we attach our water lines so this one's just going to go on the bottom here and this is the hot water one on the left hand side and soon as I figure out which way this goes on there there we are and should just pretty much be good with hand tightening these I think so if it needs to be tightened more I can go and and do that but I think just hand tightening this is is plenty like I said we can always tighten it more if need be if it's leaking okay now we just make sure the right one is our cold water okay so our cold water we're just going to attach this cold water one here cuz this is our dripper dripping pretty good that's all right as soon as we get this on there should end all our little dripping problems there eventually I need to replace these um seals on these things but that's okay for now and then I can attach my hot water right here and once again I'm just kind of hand tightening these and then if it needs to be once I turn my water on there water coming out I'll check for leaks if I need to and back out my hot water here back out my cold water and I'll probably just give these just a tiny little turn here just for good measure maybe like a quarter of a turn like said these don't need to be super tight and then just check for drip see if it's dripping doesn't appear to be pretty happy with that go up top and check it out all right so what I like to do is splash some water up here make sure it's not dripping down into this seal here but that works seem to be working really well and there we have it my friends um no leaking at all no drips underneath now we can just kind of clean up our sink and I think it looks uh really nice here we have our cold water here I like how it's nice and high up so um then this can turn around obviously so it's really elegant and our hot water plenty of room for your hands to get under here just a nice little stream of water there and turns off nice and smooth no dripping and we can see that our sink portion here we want to set that and plug up our sink we just press that and it fills up nicely and if we want to drain it same thing so working really well no uh drips no leaks underneath looks good my friends thanks for watching this video I hope it was helpful and it's just a nice elegant uh piece here works really good we're going with the matte black on pretty much all our finishes here in the bathroom so nice and functional and working great so thanks for watching this video my friends I hope it was helpful you guys have a wonderful day and I'll see you next time