ESSE MARCENEIRO FEZ UM BELO BANCO USANDO FERRAMENTAS MANUAIS

Hello everyone, today I'm here at the back of my house and I want to make a tax bench using it like this, I'm going to do it with a spike and wedge, right? At the lumber yard I lost the more or less standardized wood, you know, some of it I had in the workshop and brought it here and we are going to make this piece that I leave here, it measures 1.70 by 34 by 4 cm thick from Jatobá and there are others here that are wood that I took from the workshop, this is another piece of wood, so it's wood [Music] this piece here that goes for the backrest This is the accent, right ? four of these here are four and a half six by 46 [Music] two pieces go on the back she will sign it has 10 four and a half by 40 [Music] So let's start there [Music] here I'm going to leave 25 cm [Music] now I I'm going to put the piece here, I'm going to come back here, I'm going to take the same line right here, important direction, taking risks on both sides [Music] here, I'm going to leave it with 10 cm here and 10, just want me to put more for three and a half, right, that's pure The thickness of the sheet wasn't here, three and a half by 6, here I do the same thing and on the other side it's the same, the same distance, you have to make both parts equal here. It's crossed out here, right? I'm going to turn it here. I left 10 because the feet have to be in degrees, right [Music] you can see that here it was 9 cm on the other side it was 10 here also 9 cm on the side with 10 So it will go in like this with this degree [Music] for the width by thickness of the piece here which is 4 cm So there will be a difference of one centimeter more open here at the bottom because here is the bottom part and this here is the top part like this side here, right After drilling here we will drill from the on the other side, the same measurements [Music] [Music] [ Music] [ Music] [Music] [Music] [ Music] [Music] [Music] [Music] this hole here, it was the same thickness as this one, the first width same size and the same degree I didn't take the degree of it but on this 4 cm piece I gave a 1 cm discount, right ? I didn't get to take it off so I left a 1 cm difference This is the drop so I'm stopping here, right and I applied a coat of varnish and I want to apply another coat of varnish and for you, he's watching the video for the first time, take a look in my videos, if you can, write there, just don't forget to press that Bell there so you can receive notifications, it's important for us, right? For all of us, and that's it, I'll stop here Thanks, see you in the next video