8 ways to brown ground beef (4th is my fav)

Home Cooking
234 followers
Let's talk about browning ground beef. I will show you my favorite method in a minute,
but we will cover some other techniques and some potential additives that you can use.
First, here's the way that I think my mom taught me how to do it. A nice wide pan — this is a
12-inch pan over pretty high heat, high enough for the Leidenfrost effect, where drops of water
bounce around on a pillow of their own steam. I'll wipe those out so they don't explode in the oil
and spurt hot grease into my eyes. Just enough oil to barely coat the pan and get the cooking
started, because lots more fat is gonna come out of the beef. This is normal 80-20 ground beef,
20% fat, 80% lean. A wooden spoon is, in my opinion, the best cooking spoon, period, but it's
particularly good for what we're doing here. We need something stiff enough that we can use to
break up the beef and to scrape really hard at the bottom of the pan. Silicone would be too soft.
Metal would do it, but we don't want to scratch the bottom of the pan, so wood. If this is bamboo,
costs nothing. If you don't break up the beef, it'll gradually solidify into little meatballs
that'll never break apart, and if you don't scrape at the bottom of the pan,
the stuff down there is gonna burn. But after about a minute, a lot of water will start
leaking out of the beef, and that will help dissolve the brown stuff at the bottom,
make it easier to scrape off. Unfortunately, that same water will make it much harder to brown the
beef, but that's OK. We got a fair bit of browning right at the beginning, when the pan was super hot
and dry. Mom used to just cook the ground beef until all the pink is gone. It looks a little
gray at this stage, but that color is the look of home cooking from the 1980s, and I find it
kind of comforting. Here's a thing Mom did that I never do. She grabbed a colander and drained
out the fat. She even pushed on the beef with the back of the spoon — squeezed out the fat.
The late 20th century was the height of dietary fat phobia. We now know that fat in the diet can
be bad, but there's no reason to single out fat as much as we used to. Lots of things are bad in
excess. 25 mils, so that's like 22 grams of grease from 500 grams of ground beef. That's like 200
calories removed from just over a pound of ground beef. Do that if you want to.
Here's what you probably don't want to do, though — the same exact process with either too much beef
or too small of a pan. This is the same amount of beef in a 10-inch pan instead of the 12-incher.
I'm doing everything the exact same way, but because there's proportionally less pan surface,
we're getting less heat transfer, less evaporation of the water that comes out of the beef,
and therefore less browning. More graying. And when I drain it out Mom-style, check it out.
It's not just grease we're pouring out. There's a water phase underneath it. That's pure beef broth
on the bottom. It's a shame to throw it away. Now, you absolutely can cook a ton of ground meat
in a smaller pan. You just have to keep stirring it for a while and boil all that water out,
leaving the tasty solids behind and allowing you to have a second browning phase.
Once most of the water is gone, you hear the beef start to crackle and fry in its own fat.
And here, now, you can brown it some more. But if the pan is proportionally too small,
you get too much of that crackling and browning, and too much exposed surface area in the pan,
overheating and burning. So, should you get a 12-inch or a 10-inch frying pan? Hey, why not
both? And get them from Made In, sponsor of this video. As you can see, I actually use my Made In
pans all the time, which I think is a stronger visual endorsement than a squeaky-clean pan
straight out of the box, but I do like shiny things too. Hey, who doesn't?
Made In works with the best raw material providers and multi-generational family-owned
manufacturers in the US, France, UK and Italy, and these pans have become fixtures in Michelin-starred
restaurants and Ragusea's house. I love and use all kinds of pan materials, but I maintain that
stainless steel is the all-around winner for home use. It's the classic for a reason — stainless
with more conductive metals sandwiched inside, like these have. And one thing that I should
emphasize more often with Made In is how well the shapes are engineered. These angles on the frying
pans maximize usable surface area, while at the same time, that rolled lip allowed me to pour out
that beef grease without spilling it everywhere. Really comfortable handles too that stay remarkably
cool on the stove. Hit my link in the description and check out the frying pans and Made In's whole
collection of stainless-clad cookware. Or look at the carbon steel, or the nonstick, whatever. If
you use my link, you can save on your order. Thank you, Made In.
OK, so if you boil out all the water, the beef starts crackling, it starts smelling a little like
popcorn. And at this point, a lot of the grease is leaving the pan. It's splattering away. You can
see it collecting on nearby surfaces. That's not the cleanest way to defat meat, but it does work
up to a point. If you keep going and really toast the beef, it starts to smell to me like breakfast
sausage. That's when every grain of meat is fully brown all over, and this to me is excessive.
I'm as guilty as anyone of advancing the false notion that more browning is always better.
It is not always better. That is too thoroughly browned. It's not burned, but too much of it is
browned. The texture is like a mouthful of pebbles, the taste is verging on bitter,
and more significantly to me, the taste is very one-dimensional. It's like a loaf of bread that's
only crust and no sweet, fluffy interior. So here, let me show you my favorite way of browning a
large amount of ground meat. Spread the oil across the whole bottom of the pan, and now, while my
hands are already dirty, I will smash the meat down into a beefy pancake across the entire surface.
If this scares you, you can do it while the pan is still just heating up.
Then I go wash my hands, and I just leave it. I do something else for a couple of minutes.
Because the meat is spread edge-to-edge, there's no exposed pan surface that's gonna scorch.
Water is starting to come out of the meat, but a lot of it is trapped on the surface of
our little raft, where it cannot interfere with browning. I can smell the bottom is getting really
brown. I can peek and have a look. Yeah, that's on the verge of burning, so now is the time to
stir this up. Use that water to deglaze the bottom of the pan. Scrape, scrape, scrape. Break up the
chunks. I tend to get a few meatball-ish chunks using this method, but to me, that's a feature,
not a bug. I like having a little textural variety in there. And then I just cook it the way mom did,
just until the pink is gone. I got plenty of browning up front. I don't need to do any more.
This tastes so much better to me. So much beefier. Actually, it tastes steak-like,
which ought not surprise me. A steak or a thick burger is gonna have this gradation
of very brown meat on the outside and less cooked meat on the inside. Heterogeneity, my friends.
The bitterness of the brown crust is balanced by the sweetness of the rest of the meat.
It just works. More browning is not necessarily better.
It could use a little salt, though. We have not discussed how and when to add salt yet,
because I don't think it really matters that much. Here, let's add the salt at the beginning
of the process. About half a teaspoon for a pound, 450 grams of ground beef. That's a
decent starting point, but it depends how fine your salt is, and how salty you like your meat,
and what more is going into this beef later. Salt does diffuse into the meat tissue somewhat
during cooking, so you could theoretically get more even seasoning throughout if you salt up
front. Here, we'll do everything the same again, but we're gonna add the salt at the very end.
I mean, I'm still gonna stir it in real good and give it like a second to dissolve, but
there we are. Tasting them side-by-side, I perceive no difference whatsoever.
Ground meat is a relatively homogenous mixture, and as long as you stir it good,
the seasoning is gonna taste even. And if you wait to season at the end,
it's easier-slash-safer to season to taste. You add a little, you taste it. You add a little
more, you taste it, etc. But while we're talking about salts, let's talk about sodium bicarb,
baking soda. This is a trick popularized in the U.S. by Cook's Illustrated.
For a pound of ground beef, you take half a teaspoon at the most of baking soda.
You can dissolve it in a tiny bit of water just to make it easier to disperse through the meat.
You disperse it evenly through the meat, and you wait at least 15 minutes. Yes,
this is basically the velveting step used in Chinese cooking.
This mild alkaline solution chemically alters the surface of the proteins,
lowering the temperature at which browning reactions occur. So,
right away we're getting that golden, almost fuzzy-looking browning that I associate with
velveted meat, and also with pretzels, which are also treated with alkali.
So, we can brown this in less time, which means we just don't have to cook the beef as much.
The chemical treatment may also keep the proteins from like tangling too tightly and squeezing out
water. It hasn't even been two minutes and all of the pink is gone, so we're done.
Honestly, that's a great trick if you have the patience for it.
The grains of meat are noticeably juicier. Would be great for like tacos. Just don't
use too much baking soda, or it somehow makes all meat taste a little like fish.
I don't claim to understand the science of that.
