Laço Coquette Adulto e infantil

hi my loves, how are you Brazil, let's make this beautiful model here, I 'm using ribbon number nine and ribbon number C for the ends. Look guys, the result of the bow is very charming and you know when I test something I like, I always bring it here you look at how beautiful it is in this color people with these ribbons number five for the ends I really hope you like today's video leave a like here so we don't forget to subscribe to our channel leave the bell activated to receive the news When I post here in the video I'm going to make girls with this color here's this shade of Pink too which is very beautiful and I hope you share the video and I put it on the clip, you can see this clip is 6 cm, for those who want it, it has a clip and If you want to use it, it's also cool and you can or not Don't use your normal duckbill, it's good, may God continue to bless your life, your home, your family and all the work of your hands, come with me, let's start step by step, then I'll go through the measurement of the base and the ends, right, it's the base and the tip, the base and the tip This is this crossed loop and the tip, right, we 're going to do this top part here and then I'm going to measure it, okay? top part So I didn't seal the ends of the ribbons, ok, we'll seal them later so for the top bow you 'll use ribbon number nine 22 cm twice, two of 22 and two of 10 so two of 10 this one of 10 cm to 10 cm, you're going to do this here, you join the ends together and secure it there, ok, it's very secure, you do it with both and reserve it because this upper part has a right and a left, okay, I left it reserved Come on guys, you're going to get the tape 22 cm you will do it here 1.5 C is 1 and I put the duckbill on both of you you will do it here then check to see if everything is ok we will go down to the right here in Pontinha and here we too we go down to the right here we need 1 cm right this one we're going to go down to the left 1 cm see if everything is ok here this one here we're going to put it on top of this first tip here you can see tip to tip everything ok here the same thing next to here I'm doing it a little quickly because we have the other part otherwise the video will be very long so let's just check here, see, everything is ok and then we're going to do the basting, we're going to do it here the basting guys, I'm going to start here, we're going to give one stitch here and five here Total of six from top to bottom, one then the second one, I'll already get it here on the other tape, observing that to get it at the back, it's also good 2 3 4 5 observe at the back here and the sixth We're going to attach the ends, ready, let me pull the thread straight here, there are three with cute little ones, just organize everything properly here, Tighten it well and then we'll finish it off, ready, I had already lined up the other one, see how the cute little pout looks, I I'm going to join it with hot glue and we'll come back Oh man, how cute does it look after I do this part, I'm going to do this one here, the cross, OK, I'm going to do it freehand, I hold it here with my left hand, I bring it, I open the four fingers a little bit, I do this And I do this, I'm going to measure the bow here, you see. So for me, it's the perfect size, if I want to reduce it a little or increase it, all you have to do is let go of this first part, do this movement here, pull it and do that, organize it here, always leave it inside, okay? We don't leave it too much there, you leave it a little more closed so here I do this just to adjust the ribbon and now I'm going to put the bow here for me, that's great, I'm going to hold it here and here then we cut this excess with tape, okay, organize it here guys and then it will be a little smaller. You're welcome because I don't like it passing through. I think it's better to stay like this. I'm supposed to make it, I'm not going to take it apart so we can measure it, but it's 50 cm, there's going to be a gap here of about 2 cm, but it's better to have more than not enough, 50 for that, now for Ponta here, you're going to need two tapes, number C, here I I have 24.5 c in half of the 25 and two of tape number 5 of 23, ready, I'm going to take the smaller one and the bigger one, the smaller one, I'm going to put it in front, can you see the biggest one and the smallest one, I put the smallest one here, now I come with the other end of the smaller one and I'm going to put everything here, we're going to have this ring, you see, and here I attach it like this, just to the lighter, just ready, the other side is ready, what we need to do here is measure to make sure everything is right, you see why here oh, I'm going to do this and I'm going to cut the ends here because here we need to have the ends very straight, let me seal them here, you can see the ends here now Girl, we're going to do this, oh, I'm not going to do it like that and not close them too much, you see here more or less half and half I'm going to do this and at this point here you see I'm going to cut I'm going to cut it And I'm going to attach it well here with a lighter, it holds this part well so we're going to baste it, don't apply glue so it does n't get hard so that's the idea here Oh, on the lighter or on the machine on the ribbon cutting machine Don't worry, everything will work out here, I need the middle. you know, guys, this part here, this marking will be here in the middle, that's it done, basting And then we're going to do the basting here, organize it from top to bottom 2 3 4 5 6 let's cut this excess [Music] and Let's seal it Ready now Let's pull it, hold it here, let's pull it here, look at this part here, it will be loose, just apply a little bit of glue here, I'll even open it here, just so you can see, apply just a little bit of glue, okay, it won't get in the way here in the basting, because we already I did the basting, I'm just going to hold it here, glue it here Let's wait to glue it here for a little while and then we pull it, everything will be fine, ready, it's glued there, now we pull it, see, here the duckbill will go through, it won't be defective or anything I'm going to do two little turns here, girls and I'm going to finish it off at the back of the [Music] line. I cut the line, tidy it up here and you pull it a little bit when we apply the finishing tape, it's a little more open here if the tip has If it's too long, it 's just cutting people and now I'm going to finish with a little bit of glue, I'm going to overlap it here. I glued the paw beak here, we took a paw beak without the cover and I'm going to use this little brain here, and then guys, we're going to bring it here, okay? I want to do that other finish, then the finish you do as you think is best when I pull it here, I organize it at the ends, I organize everything and bring it back here, I'll cut it a little here, I don't know, here I'll glue it and come back Hey guys, sometimes It gets a little bit we're going there just give it a little tug slowly so it doesn't rip it out of place I cut my ends a little these ends here it decreases a little ok and that's what the result is I loved it I really hope you like it ok I made this kiss on the heart of you, my loves, everyone stay with God, it's good ISS Here I put it on the clip and see you in the next video