Cinematic Lighting 101 | How to Use Hard Light

Studio Solution
24 followers
Hey, what is going on guys?
Ted here with the A-Team.
Today we're going to be talking about hard light.
What is it?
How do we use it?
What are a couple of factors to consider before we take it into our next scene?
Let's do this.
Alrighty guys, so now we're on set with Megan Stacey.
Megan Stacey is an LADP that's a commercial and feature film cinematographer.
Basically today we're going to be talking about hard light.
What is it?
What are the factors you need to think about before putting it into your next movie?
So hard light is basically a quality of light that comes from a really small source and
casts really strong and well-defined shadows.
It's the size of the source relative to the subject.
So you can achieve it by having the source really small or you can move the light further
away from the subject.
So the sun is very big but if you move it super far away it becomes very small relative
to your subject so then it casts a really hard light.
So when we're using hard light, what are the main considerations we've got to think about?
Yeah, so I'd say the first one is direction.
So is your hard light going to be a back light, side light, front light?
I'd say the safest bet is back light.
What's the reason you don't use hard light from the front?
What are you looking out for?
I think it can look really good but it casts really strong shadows and so sometimes it's
a little not flattering for people that don't want to accentuate their flaws.
So I think the next thing would be quality.
A lot of people think there's just two categories of light, hard light, soft light, but there's
a whole spectrum in between.
The next thing I'd say is what are you putting in front of your hard light to sort of give
it shape?
Venetian blinds work well, kukulores does anything to really give it kind of that shape.
Last one that I would say is using haze.
It just adds another dimension to it.
You can see the geometry of the light in the air.
When you have soft light and you haze it up, I find that it mostly just kind of milks the
contrast.
When you use hard light, you get the really defined shaft of light and I think it looks
really good.
All right guys, so we're going to take those four tips, we're going to take them on to
set and see how they apply in a couple of real world scenarios.
Let's do this.
All righty guys, so now we're on set, we're going to be breaking down our first lighting
setup.
So what are we going for here?
Yeah, so our first setup was sort of like a Blade Runner-esque, noir kind of feel,
really cold.
The first light that we put up was actually the backlight, it was a 300D with a Fresnel
attachment and barn doors just shooting through the window.
And we put it behind them as a backlight to really get the bright edge light on the hair.
And then we backed it up as far as we could just to make sure we got a really hard cut.
And the last thing that we did was put a bunch of tape on the window because I just like
the look of hard light kind of haze going through Venetian blinds.
So I improvised and I just kind of made little tape cutters and I think it worked out.
In addition to the 300D as the nice hard backlight, we sort of dropped a cutter down, a solid
to use as a kind of more interesting shape.
So the next thing that we did was we put a little bounce card down on the table and just
to like kick a little bit of that hard light back on their faces, which, you know, once
you take the hard light and hit it into the bounce, obviously it becomes soft light.
So it's very flattering on their faces.
And it was pretty hazy in here too.
Yeah, exactly.
So we hazed it up and that's what creates those interesting shafts of light coming through
the window.
So in combination with the cutter coming down, the strips of tape over the window that act
as like Venetian blinds kind of thing, it creates a really interesting sort of like
rays of light coming into the background.
All right.
So let's go check out a little bit of that footage right now.
All right, you guys, we're moving on to our second lighting setup.
So Megan, what are we going for with this one?
Yeah, for this one, we did a little confessional setup, a little warm light pushing in.
So we didn't have much to work with.
So basically what we did was covered basically the entire thing in duvetyne and then put
up a little grate that kind of reminded us of the pattern that would be in a confessional.
Duvetyne is just a black fabric that we use in the film industry.
It's fire retardant, so it's great.
But if you needed some black fabric, you could just go get some, a bed sheet.
Now, where did you find this grate?
Yeah, I just got it at Home Depot.
You can get it like an aluminum sheeting, I think it is, for less than 10 bucks.
Now I love that you just dressed this scene and made it look like a confessional because
I think it's super applicable.
There's a lot of Indie DPs out there, Indie films that are like, we can't find a confessional
or we can't pay the money to book one.
The fact that you just made one out of kind of film tools and black sheets, and it's great.
It's pretty incredible.
In this situation, it's a lot more about what you don't see is where you get the impression
of it.
And I think that was definitely good enough.
So the first light that we set up was the 300D.
We just had it shooting through the grate onto sort of the side of the actor's face.
So it acted not as a backlight this time.
But you said, you said backlight.
I said backlight is the same as that, but in this situation, it just, you know, ended
up looking a lot better as a side light.
So basically what I was describing before in the grate that we put in front of the little
window gave the hard light just a really cool shape on the actor's shoulder.
So another thing that we did was we used a small 18 by 24 silk to kind of soften the
light off the actor's face.
So leaving kind of the hard shadows on the shoulder, but just soften it off, just like
probably neck up.
The last thing that we put in the scene was just a little bounce, sort of like under the
camera catching some of the spill that was coming in from our one light, just coming
around his face and catching his other eye.
It looks really, really good.
It was fun.
Check out some of that footage.
Let's go take a look at it right now.
All right, you guys, there you go.
There's your episode primer on hard lighting 101 and four considerations that you got to
think about before you take it into your next scene.
Megan, break it down.
So the first one is direction.
So is it a front light, side light, back light?
I'd say back light is my preference.
Number two is quality.
So you just have to remember that the size of the source relative to the subject.
So the smaller the source, the harder the light's going to be.
So just think about the sun.
It's really big, but it's really far away.
So therefore it is a hard light.
So the third one is shaping.
So, you know, using a cucullaris, using things like that tape we use to break up the light,
you know, a little bit.
The grate that we use to kind of give those hard shadows and give it an interesting shape.
And the fourth one is using haze.
If you have, you know, hard lights playing in your scene, haze can really add a lot of
interest to it.
You can see the geometry of the light.
It could look really beautiful.
So if you like this episode, make sure you find Kmegstacey on Instagram.
Give her some love, ask her some questions.
She is saying it's okay to ask questions, which is great.
If you want, you can also ask questions in the comments below.
We're going to scrape through and basically answer them as they come out.
And a challenge for you guys is basically look back the past five years, try to find
us your favorite example of hard light being used.
It's one of the examples in one of those movies.
We're going to pick the best comment and give out an Amaran MX, which is one of our new
bi-color lights.
So if you like this episode, make sure you leave a comment below.
Think of something creative.
I'm Ted from The A-Team and we will catch you guys next time.
