Lecture 58 : Cell Based Biosensors - Part 3

IIT Kanpur July 201
20 followers
2 Video Views·Oct 4, 2024
So, welcome back to this class. So, previous class, I told you that we will be sharing
how you can mimic the human brain's electrical activity on a chip, and how you can recapitulate
some of the events happening inside the brain. So, as a case study, we took an example that
something which is influencing substantial Niagara, whether it influence the other part
of the brain or not. One of the way without invading or without killing thousands of animal
to figure out this, you can do it on a chip. Now, that is what I was telling you that where
the technology is moving. Now, say for example, use one rodent or you use some kind of a stem
cell to develop substantial Niagara neurons and hippocampal neuron. Either your source
could be some form of a stem cell or you can use few rodents to collect the cells.
Now, what you can do using advance photolithographic techniques, you can develop, you can lay down
the extracellular matrix in the form of a circuit. So, what is your target? Your target
is that you have to establish a connectivity between the hippocampal neuron and the substantial
Niagara neuron. What you can do is, say for example, you have a microelectro direct chip
like this. This is tailor made microelectro direct chip. Now, you create this dotted lines
are showing where the neurons can grow. These are extracellular matrix which are printed
upon the electrode surface as well as non electrode surface. So, these are E's stand
for electrode E 1, E 2, E 3, E 4, E 5, E 6, simple case study I am showing you.
What you see out here are small tunnels. A tunnel big enough to allow a neuronal process
to grow, but not big enough for the cell to cross through it. Now, you take these substantial
Niagara cells and you plate them. So, obviously, they do not have much places to go except
to sit on top of these electrodes because rest of the area is non cell adhering or non
favorable substrate. So, only those dotted line as the areas where the cells will grow.
Similarly, you take the hippocampal neurons and make them sit in this and you allow them
to grow. So, automatically once they are growing following this path, they will cross through
these tunnels and they will make connectivity. So, as soon as they make connectivity that
means they are forming the synapses. They have a synaptic connections. Now, once there
is a synaptic connections, now they will try to do a electrical activity. So, say
for example, this area will start to communicate or vice versa between each other. This is
just an example. This may not in a real life happening, but just you have to understand
how the technology can help you to answer something, which was never feasible prior
to this. Now, what you do? So, as I told you these
are in two separate chambers which is disconnected. Now, you add the toxin to this. Now, when
you are adding the toxin, so automatically the proximity of the toxin is close to the
substantia nigra. So, automatically it will affect these cells. Obviously, there is no
denial that some of it is going to diffuse to this side, but that will take a longer
period of time and that can happen in the brain itself through cerebrospinal fluid.
Now, you see how this durotoxin is influencing the electrical activity here. Does electrical
activity of this is getting compromised or how much time does it take? So, as I mentioned
you can do a lot of chronic experiments. Similarly, you can use this model for another very interesting
thing. Say for example, instead of say different parts of the brain, you want to understand
how a neuromuscular junction works. What you can do? You can grow the muscles on this side
and you grow the neurons on this side. They will travel and form connectivities. You can
study the neuromuscular junction toxins. So, you can put the toxin on synaptic side, neuromuscular
junction side. You can put the toxin on the neuronal side. Similarly, in the case of substantia
nigra and hippocampus two chambered model, you can put the toxin on this side too and
see does it influence substantia nigra and vice versa.
So, there are thousands of combinations what you can do, but in order to do so, you have
to have understanding of how to manufacture planar in large number planar microelectrode
array. One, you have to understand photolithographic tools. You have to have a hang of cell culture
technologies. You have to have a hang on micro systems fabrication and electronic
interface. These are some of the tools, key tools what you need in order to study these
kind of systems. So, next level comes how we can translate.
Say for example, in the beginning I told you that there are different ways you can translate
these kind of information. So, as I mentioned one of the major challenge is that most of
this toxin leads to paralysis. So, paralysis means your muscles are not moving and muscle
is a structure which moves. So, if you recollect back as I mentioned there are three four events
which happen. A neuron secreting generating an action potential reaches the neuromuscular
junction. There it leads to the secretion of neurotransmitters acetylcholine. Those
acetylcholine travels through that small cleft of neuromuscular junction or neuromuscular
cleft and jump to the other side and binds to the vacant spots which are meant for acetylcholine
binding. Upon binding they open up the cation channels. Those cation channels lead to the
entry of sodium influx inside the muscle. Sodium influx entry triggers an action potential
within the muscle. So, the first action potential was in the neuron and there is a chemical
transmission followed by a action potential generation by the muscle. The action potential
generation by the muscle leads to activation of the sarcoplasmic reticulum inside the muscle
which was sensed by ryanodine and BHPR dihydropyridine receptors. That leads to the release of the
calcium from the sarcoplasmic reticulum transiently before it is being pulled back by the sarcoplasmic
reticulum by the different pumps. That spiking of the calcium plays a critical role in the
actin myosin filament movement. In that process, the final outcome what we see is the muscle
movement. This whole process is called excitation contraction coupling theory where excitation
and contraction is being coupled together in this process.
Now, what I wanted to share is this whole process as I have already mentioned. You can
recapitulate in a microelectrode array or using patch clamp electrodes. Now, I will
tell you a different kind of sensors where cantilevers have been used because there is
a muscle involved in it and muscle is generating a force and this force varies. So, if you
look at the different kind of muscles in your body, so there are three different kind of
muscles in your body. Skeletal muscle, this is maximum force generating muscle. Within
a skeletal muscle, there are two different kind of fiber. One is called which is in extremely
less number less than one almost interfusal fiber and extrafusal which is the rest. Then,
you have cardiac muscle. Most of the force generation is done by cardio myo means muscle
site means cells. Then, you have smooth muscles. Now, what distinguishes each one of them is
the force generation. In other words, the actin myosin proteins, now most of the neurotoxins
hit either this or this or this and smooth muscle just for you are the ones which are
digestive tract and other places where involuntary actions are happening.
Now, how we can without using animals? The question is without using animals, how we
can study the force dynamics or we can perform the force measurements. In other words, what
we wanted to do? We wanted an animal free system. Now, again back to the technologies
I was telling you, microfabrication and electronic interface is the one which comes to your rescue.
One of the technologies is say for example, you have a micro cantilever platform. I wonder
what is a micro cantilever platform? Something like you all have seen the bridges, any kind
of bridge say for example, you all have seen how a bridge which is something like structure
which is suspended structure. So, you have you all have seen the in the swimming pool,
you have seen the diving boat. Now, say for example, when a diver goes, so this is a staircase
we are climbing and diver is standing here. So, what you experience is that there is a
motion movement happening here before this guy jumps into the water. So, there is a kind
of a motion which happens and you can actually figure out the motion in a very simple way.
Say for example, from here from a fixed spot here, you shine a light here or you shine
a light to the tip of this. Whenever there is a motion, so you see the light will what
will happen. So, whenever you are there is a motion out here, if this is the regular
reflection angle and you have a position sensitive detector, whenever there is change you will
see a kind of something like this. So, there will be change theta which is happening.
So, technically speaking you should be able to figure out this change, you can detect
this change. Now, if you know this change, there is a way you can back calculate the
force. So, that means, when you are talking about the force that means, we are talking
about how much force this particular individual is generating on top of that diving boat.
Now, this is exactly the principle when I am telling you about micro cantilever array.
These are suspended. So, imagine each one of them and redraw this for you something
like this, each one of these are diving boat. So, there is a cut underneath. Now, if we
could grow individual muscles on top of these and of course, there are two ways we can think
of it, either we since we are not going the neurons here, then what we can do is underneath
we have electrodes present which will do the job of the neurons. These are the electrodes
which are present there, these are the electrodes. Now, instead of the neurons if we have the
electrodes which are present there, what will happen is that you can control their excitation
which leads to the contraction. So, in other words you can actually give an electrical
impulse to generate a force from the muscle. Now, think of this situation, replace this
individual with a muscle and replace this staircase out here with an electrode and underneath
you have and here replace this light with a laser beam and here you have position detector.
The next class I will pick it up from here and I will explain how this technology would
completely alter the way we are going ahead in understanding one of the most fundamental
circuit which is a potential biosensor tool for the future research. Thank you.
