EPIC LIZARD ENCLOSURE!!!(The Lizard Lounge)

The World of E-xotic Pets
61 followers
Comments are disabled for this video.
Hello everyone Tommy's Reptiles here. In this video I'll be showing you the complete setup
of this enclosure right behind me. This enclosure is for my adult frilled dragons.
This is where it all began. I sketched my idea on a sticky note then I handed it to Ed the
barn doormaker from Salvage Woodworks. Here's some photos of him constructing it in his workshop.
Then once he completed the structure he dropped it off at my house.
Once the enclosure arrived I knew that I had a lot of work ahead of me.
I call this enclosure the lizard lounge. It's on wheels, it's an enclosure and a bar. One of the
first things I did after getting this enclosure was stir up some drylock. It's very important
to coat the inside of this enclosure with not one but two coats of drylock. This stuff will
protect the wood from any moisture so the wood maintains its integrity. It's very important to
give this drylock a very thorough stir before applying it to the enclosure. Here's some footage
of me applying the first coat on the first half of the enclosure. I used both a roller and a paint
brush. So here's one side done with its first coat compared to the side with no coat. I ended
up doing two full coats to each side. Then my wife and I finished by staining the entire outside of
this enclosure. All right here's what we're working with today. I'm gonna first do one enclosure and
then I'm gonna do the next one and first I gotta clear all this junk out straighten out the top
but while I'm working on it I'll probably leave that stuff up there for now. I gotta get this
couch moved out so I could sweep in here and then let's get started. All right so this is what we
have so far. The lizard lounge as is. We're gonna get that little enclosure out of there and then
we're gonna get these decorations out and then start scaping it. But most importantly we're
gonna start off by taking out the glass panels so we don't damage them in the process. Let's clear
out these enclosures. There's all the stuff that I had inside of them. Some of the stuff is going
back in like the plants and yeah so I'll show you what we got in here. A lot of room for my
feral dragons. We got two outlets up here one for UVB one for heat and a nice air vent and then same
exact thing on the other side and on the outside that's what the air vent looks like. So here's
the stuff that I have to make their climbs. I got some random branches, birch wood, I got some cork
bark, this cool piece of wood that the guy who built the enclosure gave me. Obviously a saw, a
drill, these plastic things I might use to drill the wood in to stand up straight and yeah let's
get going. So with this cool piece of wood I'm just going to use a regular hand saw and cut this
one branch off because it's just too long for the enclosure and these branches will be perfect for
the feral dragons to sit on and bask. There we go. Now I might cut this in half make a cross or
leave one piece but to make a support for the piece of wood so it stays nice and balanced.
Worked like a charm. Just going to put a couple more screws in it just to be safe.
Let's go see how it fits in the enclosure. All right I'm just testing it out but it looks like
it fits perfectly. All right guys so I think I'm going to put it in this one with the big adult
male feral dragon. I think it looks good in there and then I'll go start making the branches for
this side. All right so I'm going to do the same type of thing with this one right here and then
I'm going to make multiple like tree climbs with these guys. I like the way this cork bark looks
right here so I might just drill this cork bark right in place right here. Might as well keep
going with it so I'm going to screw this one in probably like right here. All right while I'm
doing the other branches I'm going to super glue these two little pieces to cover up the screws so
you don't see those and I'm going to let them dry in this 95 degree heat and then by the time I'm
done with the other stuff it'll be good to go. Got some super glue I'm just going to stick it right
over the screw. I got this other piece right here. Press it real hard right here. Put a little bit
more on. There we go. Put a little weight on it. There we go. Now I'm going to cut these birch
branches down so they fit in the enclosure and then I'm going to screw them in like I did the
other branches. All right guys I'm all finished with the climbs. This is what I got. I had to rush
because the big storm's coming in so let's get inside and start decorating. All right guys now
that we got the sticks in there and make sure they all fit I'm going to take them out and then I'm
the background in. So for the background I got this fake rock looking pond liner.
So it's waterproof, weatherproof, all that. It's called rock on a roll. It's pretty affordable,
durable, and it looks like a rock. So I'm going to have to cut a portion for each side and then
I'm going to have to cut little holes for the air vents. At one point I wanted to make 3D
backgrounds but I like how this presses flat against the back wall so then the dragons will
have more room. So to make it easier I just tape measured the inside and it looks like it's going
to be exactly 80 inches. All right so we'll cut roughly 80 inches and I'll use this snake hook
as a guide. So I have this heavy duty velcro and I'm going to line the top edges with this and
stick it to the pond liner and see if that works. All right guys so here's what the rock background
looks like so far. I'm pretty pleased with it. At first I had it like flush against the back
but I didn't think that looked natural so I kind of left some wrinkles in it because it looks more
like a natural rock structure. All right guys so here it is. Then I'm going to go do the other side
and then after I do the other side I have to take like a razor or something and then cut holes in
there in the air vents. All right guys that was tough. That's probably the hardest part of the
whole build adding all that velcro but we're done with that part. Let's get a razor blade and cut
some air holes. All right guys now you're in the enclosure with me so now we're going to use a
razor and trace the circles for air holes. It doesn't have to be perfect and if it if it looks
crappy I could always cover it with some fake plants. All right so I cut little small velcro
strips and I'm going to velcro in between these so they stick flush against the enclosure. All
right so now I'm going to repeat the same step on the other side. All right guys all the air holes
are in. They're not pretty but I could always dress them up like I said with some fake plants
or something. I'm going to clean the bottom of that. I might use the rest of the pond liner to
put on the bottom floor and then I'll cover that with mulch. Look how messy my reptile room is.
So we'll cut some pond liner put it on the bottom and then we'll cover it with some mulch.
All right guys so it's completely covered in fake rock. Don't worry about that. It looks kind of
crappy but it's going to be completely covered with mulch. Now let's just do the same thing to
the other side. All right guys now it's pretty much completely covered in rock. I'll cover that
little white spot in a second. I'm going to put the climbs in and then we'll put the mulch in.
All right so first we're going to put this big climb in. There we go. Situate it towards the
back a little bit. All right that's a perfect spot because he can jump up and bask on all these
at different levels and the UVB will be over here. I'm going to add another vertical climb.
I think I'll put it over here wedge it in this corner something like that for now. All right
guys let's move to the other side now. All right put this big guy right in the center
so they can catch UVB and heat from it. Yeah that's pretty good right there. I think that's
good right there. All right I think those climbs are looking pretty good. Now let's go add the mulch.
All right time to mulch the other side. Here it is so far. I think it's looking pretty good.
Now let's add some fake plants. So I got this cool purple plant and I'm thinking about putting it
somewhere around here but I want to leave these branches exposed so he can have easy access to
bask. So I'm thinking about maybe like zip tying it on this side right here. Yeah I think I'll do
that. All right yeah so I think that looks pretty good for that branch. It'll look better when the
lights are on and then I might attach a little plant to this one too. So for this straight up
and down plant right here I'm thinking of just zip tying one kind of to the back of it. Yeah
that'll look good. So I'm not really sure I like the way that turned out with that plant right there.
I might change it in the future but I'm gonna get started on this one so I can get the frilled
dragons inside these enclosures. All right guys onto this enclosure. All right I got this huge
plant. I'm thinking of putting it up here. Let's see. Yeah that kind of looks good actually. I
might leave it like that for now. For now I'm gonna mimic the same type of plant on this one
and these two and then we can put the lights in, put the glass doors on and then we're ready to go.
Yeah I like that. All right all the fake plants are in. Now let's add the light bulbs.
All right guys I like the way it looks. Let's go put the glass panels back in
and then put the dragons inside.
All right get squishy and rattle. This is their favorite rock so I'm gonna put that in there with
them. I put their favorite rock right there. All right squishy here you go buddy. Come on climb
up bud. He's like you better bring my girlfriend. Here she is. All right here you go girl. Nice it
looks like they have plenty of room, plenty of climbs and let's go get the last dragon.
The moth is ready to go. Come on buddy. All right here you go buddy.
He's had some stuck shed so now I can focus on it. I can see him every day.
I can concentrate on it. Fix him right up. I'm just gonna give their enclosures a nice spray down so
it's nice and humid. All right I'm gonna try to get him to eat a mouse. I doused it with calcium
and vitamin powder. There we go. I just need him to chew that mouth and swallow it and he'll get
all that nutrients that he needs. And tomorrow I'll give him a nice soak with this shed aid that
I got that'll help him shed and get rid of all that stuck shed that he has. There he goes. All
right let's see if anyone over here is hungry. Well I guess not. I'll leave him alone and I'll
try to feed them tomorrow. All right so before I go here's a little sneak peek at my reptile
room as it is right now. I really hope that you enjoyed this video and thank you for watching
Tommy's Reptiles.
