Modifying the HIGH MILEAGE TYPE R into a track day car! Civic Type R FN2 MODS & DRIVE

Tuning Pro
54 followers
Here we go.
Haha, yes!
Hello YouTube, welcome back to the channel.
Today is the day. The Civic Type R is in the workshop.
We are getting it ready for our upcoming track days.
We are throwing a ton of parts at it.
I've spent as much on parts as I did on the car, if not more.
So we are going to try and make this as race car spec as we can.
And see if we can't improve our times on the track.
So, let's have a look at what we've got.
Here it is, ready for surgery.
So we charged the battery last night, we know that was a bit of an issue.
We've sorted out all the other issues here as well.
The car currently is completely standard, right down to the budget Debica tyres.
So, today it is going under the knife and having a Direnza cold air induction kit.
Emtek drilled and grooved discs with Mintex pads.
ProSport springs, which are going to lower it by 45mm.
We've got a set of harnesses.
Of course these seats, standard, will accept harnesses, so that is a real bonus.
We've got the clutch, we've got a blueprint clutch going in there with all the gear oil and everything changed for that.
And we've got some Uniroyal Rainsport 5 tyres, which should give us a load more grip than these budgets.
On top of that, we're going to do loads of little extras.
We are going to strip out the rear interior, make it a bit more lightweight.
We've got a few little extras, like towing strap, gear knob gaiter, because this one is well and truly worn out.
And we are going to send these wheels Championship White.
Probably even try and paint up the calipers, tidy this whole thing up.
I think it's going to look amazing with the Championship White wheels.
In fact, I've already done the spare.
Look at that.
They are going to look awesome on there, especially once we get the livery done.
Which won't be today, but coming up in a future video, we're going to get some livery on there with our logos, etc, etc.
I think this car is going to look awesome.
So, the guys are going to tear into it, and we need to service it.
And I think we'll probably even do an air con recharge, because a gentleman doesn't want to be perspiring when he's in his race car.
So we're going to sort that out as well.
And I think there's nothing left but to hit a montage.
Snips and a zip tie.
Let's have a look.
Okay, let's have a quick look at this and have a talk about everything we've done.
So, we've got the Honda Championship White alloy wheels that we've painted up.
They look awesome, even to the centre caps.
Then we've got Unirol Rainsport 5 tyres on there to give us a bit better grip,
especially if it's raining, which it's meant to for the next week or so.
Mintex drilled and grooved discs.
These are like a black finish, which will obviously wear off as we use them.
Mintex pads.
And even got the canopies painted in Lemon Yellow, which I think looks fresh as hell.
And it's going to go with the colour scheme for the livery.
Everything's been lowered by 45mm with the Pro Sport Springs.
I don't suppose I can show you those from here, but the whole car, the stance is looking a lot better.
And hopefully this is going to handle a lot better.
Inside, it's had a really good clean, so no more mould.
In fact, during the works on this, I did take a day off ill.
I wouldn't be surprised if it was due to all the mould that was in this car.
So, everything's cleaned up.
And we've even got our nice red Alcantara gear knob gaiter, which I think looks great.
The rear interior is being ripped out.
That is going to save us a fair amount of weight.
And hopefully improve the handling.
I think at a later date we will get a strut brace in here.
Under the bonnet, we've just given everything a good clean up.
So, it's all looking a bit tidier and degreased.
We've even given the rocker cover a bit of paint.
And we've got this Direnza induction kit in here.
Still got the same crappy old battery.
I was hoping I could save that with a charger, but it just wants to keep dying.
So, we're going to have to get a new one of those, I think.
We've even got a new alternator belt.
And of course, we've got a new blueprint clutch in there.
We have also done one wheel bearing on this.
And we've got one more to do before our track day, which is Monday.
This is the Saturday, so in about three days' time.
If you are in need of a jump pack, I highly recommend these Noco GB40s.
It's cheaper than most of the lead acid jump packs anyway.
And they definitely seem to do the job better.
And seem to last longer.
Alright, here we go. First drive since the modifications.
There are a few things that jump out at me straight away.
Mainly warning lights.
We've got ABS lights and an engine management light has now come on.
ABS, we've had the seats out. We've taken seat buckles and things like that.
Possibly something to do with the brakes.
That's fine, the guys will sort that in the workshop.
Engine management.
Probably something to do with a sensor to do with the induction kit that we've fitted.
So fingers crossed, at least for this quick test drive, it will drive normally.
The next thing that is very apparent is the clutch.
It's still actually quite a light clutch.
But there is far more feel to it now.
It is not an on-off switch like it was before.
So that is going to certainly make it easier to feather in gears and pulling away things like that.
Because I must have stalled this car a hundred times in the last week.
So that's a bonus. Brakes already feel better.
They're going to need bedding in. They're going to need to bed in those pads.
To be honest, I need to do some research on how I should bed in the pads properly for something like a track day.
I think there's something to do with going through a couple of heat cycles or something.
Let them get really hot and then cool down.
Please do leave me some comments if you've got some recommendations.
Because I will try and read them before we actually end up on the track day.
What else have we got?
Disappointingly, I did recharge the aircon and it was working beautifully.
But now I'm putting it on and it's not really.
So to be fair, when we filled it up, although it passed the pressure test, it didn't have any gas in there.
So I wonder if we've probably got a leak.
That's a bit disappointing. I'm not going to be able to sort that before the track day in a few days.
I might sweat.
Handling-wise, it definitely feels a lot more direct.
It feels lighter. Steering definitely feels really good.
It feels really light on the back.
We've taken the interior out in the back, obviously.
And that is a heavy interior.
But I am surprised at how much that's made it feel like it almost really wants to oversteer right away.
But that could just be me getting used to it.
It's almost certainly down to the lowering springs that we've put on.
It's probably just kind of maybe done a shift in balance of weight.
When we actually get to get full chat on the track, then we'll really find out how it's handling.
Obviously we've given it a good clean out in here.
So it's looking much better.
It's certainly a bit noisier on the back because now you hear every stone and bump you go over.
Because there is no insulation whatsoever.
Oh, now we've got low fuel warning as well.
Other than that, I haven't actually put my foot down yet to see what difference the induction kit has made.
I'm pretty sure there's going to be an audible difference.
Okay, I just pulled over quickly because there's a fair bit of traffic.
And I wanted to have a bit of clear road to really test out this induction noise.
Here we go.
Haha, yes!
Yeah, she's definitely a bit squirrely on the back.
And maybe I haven't done much favours to my clutch there.
Yeah, she feels quick now.
Holy moly, my friend, get out of the way of the road.
Ford Ranger coming round the corner at 60mph on your side of the road is not really what you want.
How good does that sound?
Oh my god.
Now I feel very reminiscent of the EP3 that I had and did track days with.
Again, in red.
But obviously the older version, I should say.
I think that car already had an induction kit on it and the induction noise is incredible.
And then the noise that you get on the VTEC changeover once you've got an induction kit is really audible.
So it really changes tone.
It makes the VTEC just sound that much better.
Okay.
Had a bit of fuel in it because I do want to carry on driving this car just a little bit more.
I can't believe I've just spent £40 on 20 litres of fuel.
188.8, which to be honest, I suppose I should be grateful.
Some of you guys have definitely got it worse.
Fingers crossed this is going to start without the jump pack after a drive.
Lovely.
That brings me on to...
Yeah, we've still got the engine management light.
But we'll ignore that as every real man does.
I was going to say, this...
I guess it's a pretty Japanese thing.
Cars that have got levers for opening your fuel cap should be illegal.
Why would you do that?
Every time I try to fill up a car that's got one of these...
Have you ever tried to fill up on a Mazda MX-5, like a Mark 2 or 3?
You've got to open up the centre console in here and there's a thing...
Why would I look in there to open up to get my...
Just give it a push thing.
Anyway, that's my rant over.
I hate levers for fuel caps because you're always walked around the car.
It's always on the other side as well.
And then you've got to walk back.
I may look 34, but I'm actually 90 inside.
OK, OK, OK.
Thank God for the new clutch because I can actually feel it.
I'm going to try and do a bit of a flying start here.
This new clutch probably won't thank me.
Probably all the mechanics out there will hate me, but...
Soz.
Awful, awful start off the line, but...
I'm trying to have a bit of mechanical sympathy and not completely destroy this clutch
or do something to it that I shouldn't as soon as we've just put it in.
Feels good, though. It does feel really...
Yeah, brakes definitely need bedding in.
They're a lot better than the last ones were,
but they're not quite as grippy as they ought to be.
So what else can I say?
Obviously, we haven't got everything done that I kind of hoped we would
as these things always take longer than you expect.
So we're still using the normal seatbelts, harnesses,
I think I'll try and get on before the next track day.
We haven't done anything with the exhaust.
I kind of want to do maybe like a centre resonator delete,
so I think we'll do that before the next track day.
And obviously, sign-writing livery hasn't happened,
but again, I think that gives us something to kind of look forward to
for the next track day in about a month after the one we're about to go on.
Yeah, my only concern is how light it feels on the back.
It feels a bit sort of skittish.
But some of you more experienced track driver, racer people
may be able to tell me...
To be fair, I've just kind of chucked this together
and come out just so I can get a video done before the weekend,
before we go away on the Tuesday.
I haven't really checked the tyre pressures.
I think when I was doing the tyres, I did them all to about 40 psi.
Maybe they should be...
Almost certainly they should be less.
So that might not be helping.
I don't know if it feels a bit better now with some fuel in it.
Just the tyres in general.
Everyone says these Uniroyal Rain Sports have got quite a soft wall,
therefore you get a bit of, I guess, roll.
Corner roll as you corner.
So maybe that's what I'm getting used to.
Maybe even the budget tyres were a bit more solid that way.
I don't know.
But it's going to be interesting to find out when we're on the track,
giving it all the beans.
It sounds so good.
Well, thanks for watching.
I hope you enjoyed the video.
I've got it parked back up now in the showroom.
We're going to leave it in here with the lights on over the weekend.
Let everyone see its beauty because I am absolutely over the moon with this.
I really appreciate all the support.
The previous video, not a lot for some people,
but I think at this stage, four days in, it's got 1,700 views and 50 likes,
which to me is incredible.
I don't think anyone's going to watch this.
So I hope as many people get to see this and enjoy it.
And if you have, please do like and subscribe.
It's going to give me the boost that I need to get on and film some more cool stuff like this.
Stuff like this.
In the meantime, keep your eyes peeled.
We'll definitely be having a track day video coming out of this.
And then probably another video modifying it with the extra bits
before we go on another track day, which we'll film too.
So stay tuned, please like and subscribe.
See you in the next one.
