How to Start a Fire with a Piece of Steel Wire! Military Pilot Emergency Fire Starter!

Life Skills
38 followers
There's smoke. Keep going. One full pull. There it is. Hey guys, welcome back to Range of Survival
and Fieldcraft. I'm Andrew, and what I have for you today is a very special emergency fire starting
technique. It's going to be great for hunters, trappers, farmers, anybody going to the field
that may have a few special items with them. Stand by. All right guys, so I got the shades
up so you can see my face. Sometimes I get comments about me wearing shades all the time,
comparing me to other people, or simply saying it's not very genuine or it's not authentic enough.
So you can go ahead and see this beautiful face, take it all in. So I've got a emergency fire
starting technique that I wanted to show you guys today. I'm out here on the creek. As you can see,
there's ice forming still. The temperatures have gone up, and a lot of this ice that's along the
creek here has melted. And I used to be able to get all the way across the creek to the other side,
but now no such luck. But I'm out here doing a lot of trapping. Trapping for coyote, raccoon, beaver,
mink, everything. So I've got a wide variety of equipment, and there's a few pieces of that
equipment that can get a fire going very easily. In fact, this technique is a technique I discovered
in a military survival manual for aviators, because aviators and aircrew personnel are
going to have access to a lot of these items. Similarly, hunters and trappers, anybody who goes
to the field is also going to have a lot of this equipment with them potentially to get a fire
going. It's a very interesting technique because it just requires a little outside the box thinking,
understanding a few of the different elements, and then putting it all together to get a fire going.
So I'm going to show you that right now. All right, guys. So I've got my trapping bag right here.
It's got everything inside that we're going to need to actually get this fire going.
This is a special technique, and we really only need two items to begin with to actually get this
fire going. We'll use three because that third one is going to be really helpful, and you'll
see here why in just a minute. But these are things that aircrew are going to have access to.
They may not be able to find their survival pack in the wreckage of their aircraft if they go down.
And in order to start an emergency fire, they may have these items, and they may be able to find
them easily or even have them on their person and use the wreckage combined with whatever they have
on them to get this fire going. And that's the whole purpose. And so my thought process with this
fire is I'm out here trapping. I'm just in plain clothes. And what if I step on this ice now that
it's melted, and I go through and I bust through, soak to the bone, can't make it back to the ranch,
and I have to start a fire now as a trapper or hunter out here, and I just have these items
on me. And I'm going to show you that it's very possible to do this. All we have to do is just
think outside the box. Now, that first item we're going to need, something that aircrew can find
in a wreckage is going to be steel galvanized wire. A trapper might carry a large game snare
like this coyote snare, steel galvanized wire, kind of a larger gauge wire. Or if you're not a
trapper and you're part of an aircrew that survived a downed aircraft and you come across
the wreckage, you may be able to find other steel galvanized wire from the controls of the aircraft
that can be used to help get a fire going. Now, that second item that hunters and trappers are
going to have on them, especially military personnel, hopefully, either as a sidearm or
they have their primary weapon system on them, and they're able to recover that after the crash
and they get out of the fuselage or whatever situation happens, that next item that they're
going to need is ammunition. Here we just have a couple of clips, a 5.56, and those stripper clips
right there, ready to go. 20 rounds in this box, and that is more than enough ammo to actually get
this fire started first time. All right, so those first two items are going to be steel galvanized
wire and some ammunition. Now, a third item that could help us a lot, something that we may be able
to find in a downed aircraft because they're usually strapped up against the fuselage,
or for a trapper, it's going to be in our trap basket or in our bag, that is going to be
just some sort of large cutting tool. And here, I just have my little survival hatchet,
12-inch S-Wing, and this is going to be good because we're actually going to need larger
diameter material to start out with to get this fire started without breaking our set,
and you'll see here in just a minute. So those three items that we're going to need,
steel galvanized wire, ammunition, and then some sort of large cutting tool to take down
material very quickly. All right, so we've got our items. The first thing we're going to need
to harvest is two large sections of material to make what will be our fire set, so we can use
hatchet for that. We also need to get material that's going to serve as a platform with our fire
and our tinder material to shield it from the moisture that's along the creek. We're going to
make this fire right here in the creek and the water is just below the surface, and so we need
a platform, one to elevate our fire off that wet floor, but then to shield it from the moisture
below the earth's surface right there from this creek bed. And then we're going to need to collect
a lot of things called smalls. These are items that are going to be pencil size and thickness
and smaller, so think of that graphite lead inside the pencil. We want things that small and dry,
so we're looking for stuff that's hanging up off the ground that's not wet, and then from there,
we can go after larger thumb size or finger size material and get a lot of it to build up
a sustainable fire. All right, so let's take off up in the woods here. I saw a good section that
we can use. It's a large, down, dead, and dry cottonwood tree or a big section that fell over.
This hatchet is going to make it a lot easier to get the pieces we need, but we don't absolutely
have to have this hatchet. We can just use leverage, some judo chops, and sidekicks,
and we can get large sections at least good enough for our purposes to get this fire going.
But with this hatchet, it'll be a lot easier to get larger sections that we're going to need.
All right, so this is the section I was talking about. We want something that is really thick.
Now, cottonwood is a soft wood, and so having a larger section gives us a longer burn time,
and so we want to take probably this section right here, maybe all the way up to here, or
even something just as small as this, because we're really only going to use one large section
to burn in and get enough heat to get our fire going, and so we really only need another section
to kind of help elevate what will be our fireboard. So this looks good enough. Let's try
going for some of this. All right, so here's our first piece. We're going to use this as an actual
platform to help lift up our fire set, so this is going to be good enough. We don't have to get fancy
with it. Just grab and go. All right, so here are our two large pieces that we're going to need.
This is going to be our fireboard, this larger section, and then this section right here is going
to be our platform. Our fireboard is going to sit up on this platform on the ground just like that.
We're going to use this to help create enough heat to get a fire started, so we've got that.
We also went ahead and collected up what will be our platform material. We're going to move out
away from underneath this tree, and we're going to make our fire right here, so you can see just how
wet the ground is because the creek is obviously right there, and there was recently ice over all
of this, so we want a good platform. We're just going to break these sticks up and make just a
simple platform right on the floor right here. This is another section of dead dry cottonwood.
It's going to make a great platform material because we can layer it, and this stuff is also
dead and dry, so it will heat up and burn just as well as the rest of our fire material. When we do
this, we want to make as big and thick a platform as possible, and so we put the large sections on
the outside, and we put the skinnier sections in the middle, and we layer it as much as possible.
All right, so we've got our platform. We've got what will be our fire set combined with
our other elements, and now we need to look for tinder and for smalls. So there's some bark up
here I'm going to use to help go over the platform even more and protect it even more from
that creek floor, stuff like this, and we can even take this bark and some of the bark from a lot of
the cottonwood trees right here and process that down for our tinder. We'll use this bark
just right on top to help as well. We could put it underneath. I'm not really worried about it
because we've got decent weather today, but we'll use this to help act as a platform for our tinder.
This stuff was dead, dry, off the ground, full view of the sun, which means it's going to have the most
protection compared to this other material that we found on the forest floor that may have some
moisture in it. So we're going to use the stuff that's going to protect our tinder most to go
right on top. All right, so we processed a lot of that cottonwood bark down. This is going to make
our tinder and we're just going to put it right on top. Now luckily today we have good weather,
otherwise with this tinder we wouldn't pull it out until we were absolutely ready to go with our fire
and even then we want to keep it protected. But because we have full sunlight today,
it's dry and we already have a platform for our fire, we can put our tinder right on top of our
platform and we're going to leave a little gap in our tinder. We're going to leave a little gap
right here because we're going to use additional tinder material to ignite it, take that fire and
transfer it from one tinder source right into here to this tinder source, and now all we have to do
is build up our fire over top of our tinder sitting here ready to go. All right, so this is a type of
material I'm talking about, smalls, things that are pencil size and smaller. There are a few larger
pieces in here, but it's all dead, dry material, relatively small, hanging up off the ground,
full view of the sun. We need two or three more bundles just like this to produce enough heat
to ignite larger material that's sustaining material, thumb size, thickness, and larger. So
we're going to collect up more of this and then we'll get ready to actually start our fire.
All right, so here is our fire lay. We've got our platform, those sticks and that bark. We've got
our tinder, that bark material we chewed up and processed, smalls, and then growing larger
material, things that are going to be thumb size, thickness, and larger to give us a sustainable
fire. Whole point of this fire lay, this teepee shape, is to give us the first time go with fire
and to allow that fire to eat this material up and produce enough heat to ignite the larger material
until we have a sustainable fire ready to go. That way we're not sitting here adding material on,
we're just lighting it and letting it grow into a mature fire. Now let's go over, take a look at
our wire and our ammo and we'll get this fire started. All right, so we got our platform material.
I'm just going to put it right here and then we've got what's going to be our fire board. Before we
start our fire, something that's going to help us out is taking our small hatchet and cutting off
a section of our fire board or even the platform itself to give us a flat catch. Okay, even that
right there is good enough for what we need. Take this and place to the side. Another thing that's
going to help us out big time if we don't have the nuts and bolts to actually make this happen
is just cutting two toggles, these things we can hold in our hands, and we're going to use these
to actually secure our wire, make it look kind of like a wire saw or a garotte. All right, we want
something like this. We want about a foot or two of wire right in there and we're going to use our
grip to actually hold the wire in place while we produce heat with this thing. All right, so with
this platform, what we're going to do, we're actually going to take out a round or two from
a stripper clip here and we're going to remove the projectile and put the powder right on this
platform. Now, we don't actually need pliers to get the round out. We could use our Leatherman if
we have it, trappers, hunters, people out in the field are going to have a multi-tool or at least
a pair of pliers and so we can simply pull out the projectile and up end the round and the gun
powder right on our platform here. If we didn't have pliers, we could take a round and using just
the head of our axe, we can actually press the round and loosen up the projectile enough to
remove it with our fingers just like that and then dump the powder on and fill it up. So good
to have, not completely necessary if we have full use of our hands and then just some sort of hard
object like this. All right, so we're going to take our catch and we're going to move it in line
with our platform and our fireboard because we're going to come out to the side to actually ignite
this powder. If you haven't picked up on it now, we're going to use the wire to create heat
friction by sawing into our fireboard and then that heat produced by that wire will be enough
to actually ignite this gunpowder. Gunpowder ignites at approximately 300 degrees Fahrenheit,
so if we can get this wire as hot as 300 degrees, we can ignite this gunpowder and now we just need
to add tinder right on top and in front of our platform here with our gunpowder. Doesn't need
to be very much, but we want to be careful not to knock over the powder. All right, so here's our
setup. We've got our wire underneath our fireboard. We've got our platform up under here and so we've
got the platform and the wire parallel with each other. The fireboard is perpendicular and then
over here we have our catch, our gunpowder, and then extra tinder. We're going to use that gunpowder
to ignite this tinder. Grab this tinder and transfer it over to our fire right over there.
All right, so if you couldn't tell, our fire lay is a little far away from where we're starting our fire.
We would want to have our fire set up right next to our fire lay to give us the best chance of
actually starting our fire and not losing that tinder bundle between here and that fire lay,
but we set it up like this for demonstration because we got sunlight that direction and we'll
see if we can make it work. All right, so we kind of have to act fast with the gunpowder out. Even
the moisture in the air can reduce the effects of that gunpowder and kill our chances to actually
get this fire going, but I'm going to start over here. I'm going to saw, produce enough heat,
ignite that tinder with the gunpowder and the wire, and then move it over here to the fire.
So we'll start over here and I'll bring it up to you guys in just a second. And for you guys on
this side, get a close-up of me sawing. I'm going to produce enough heat on this thing with the wire
to bring that temperature of the wire up to at least 300 degrees, touch it to the powder,
ignite the powder, ignite the tinder, and then grab this and move it over there to our fire.
I'm going to smoke. Keep going. One full pull. There it is. All right. Grab our tinder.
Make sure it lights. We got it. Let's not lose it. And we're going to transfer it.
We've got our tinder right here. It's lit. We just add it into our fire right there.
Come back and get you guys. You can see now that the fire's eating. We want this one shot,
one kill. We should not have to maintain this fire at all with the preparation we put into
the fire lay. That's the whole point of this is to make it a one-time fire, light it, set it,
and forget it. And now we can go off, get more material, add it on, and we can keep
our fire through the night. But notice how we're not doing anything to this fire.
It's taking care of itself because we prepared and we made this firework first time.
All right, guys. I don't know if you can see that. This is the wire and toggles cut through
this piece of cottonwood. It's about two or three inches in diameter, and it's a soft wood. We cut
in with this wire, maybe an inch, inch and a half or so, just to get our fire going over here.
Next time, choose a hardwood because it'll be harder to saw through that material, giving us
more chances and reducing the likelihood that we're going to cut completely through this material.
But luckily, we know just to heat it up, produce smoke, go about 10, 20, 30 seconds longer,
get that wire hot, 300 degrees, and then apply it to our gunpowder to ignite it. But you can see
how far into that piece of wood we actually sawed with this wire. All right, guys. A down
and dirty video today on an emergency fire starting technique that we can adopt from military survival
skills and apply to other areas. Hunters, trappers, farmers, surveyors, anybody going out into the
woods that may have these items with them, all we need is a firearm with some ammo, some steel
galvanized wire, which we can either find on a trap out here if it was an emergency and then
take that away, or find an aircraft, farm machinery, any type of machinery that may have
wire attached to it, we can use that steel galvanized wire to actually get a fire going.
So, down and dirty video. I really hope you liked this video today. If you did like this video,
in my beautiful face, hit like, subscribe, leave a comment down below. I appreciate everything you
do for me and for this channel, all your likes, your views, your subscriptions, your comments,
your feedback, and your shares, and I'll be back with another video as soon as I can, guys. Thanks.
