Repairman reveals: The worst Mercedes engines

The Engine Explorer
3 followers
Jan 8, 2025
Mercedes also has a lot to answer for - even if the engines are generally better than those of other companies, there are some extremely frequently installed engines that cause customers long-term (expensive) problems and there is not much left of the once insane longevity that one could expect from Mercedes.
The OM648 engine in our employees Mercedes is one of the reasons why Germany has long
had a fantastic reputation as a car nation. These Mercedes engines, on the other hand,
are certainly one reason why this reputation has now taken a turn.
Everyone is picking on the VAG group a bit at the moment, but if we're honest,
things aren't much better for the other German rulers.
Let's take a look at the timing chain drive of the M278 Modus, for example.
Installed in every 500 from 2012, the timing chain is obviously no longer the timing chain
that you are used to from Mercedes. So it is not a double roller chain, but rather a toothed chain.
Yes, the Mercedes group seems to have taken a lot of inspiration from VW technology here,
because this is a timing chain from the 1.4L TFSI engine.
This is the chain-seated engine known for chain damage at 30-40,000 km.
And if we compare it here, I installed a very similar chain in this 4.7L V8 engine.
The funny thing is that there are three chains installed. I mean, in 2004 Mercedes was still
able to build an engine that managed a million kilometers and where you didn't have to touch
the timing chain. Even more devastating, however, is the cylinder coating on these engines,
which is produced using the so-called Silatech or Alusol process to minimize
costs on the one hand and friction on the other. The buyer, however, saves nothing here,
quite the opposite. Every engine block with a Silatech coating will suffer engine damage
sooner or later. This is also the case with this example, where we have now replaced the Silatech
cylinders with a gray cast iron bushing. So we basically stripped it out to make the engine
really durable. I'll show you what the engine block looked like before the overhaul and,
above all, what the pistons looked like in a short excerpt. Incidentally, since March 2015
all M278 engine blocks have been fitted with cast iron bushings at the factory,
so Mercedes noticed it themselves. This M272 engine, the standard V6 petrol engine at Mercedes
since 2004, has an even more serious defect. In these engines the chain wheel on the intermediate
shaft wears massively. This is because the material was chosen to be far too soft and
this usually manifests itself in a massive chain rattling. And if you ignore this rattling,
then the following happens. Then the engine starts to fall apart, as in this case.
Valves collide with the piston, tear off and create splinters. As you can see, there is no piston
anymore. The piston is in very small pieces down there in the oil pan. And even though this problem
has already been fixed by the manufacturer itself, Mercedes has an upgrade. Sprocket does
not ensure that this engine is a long-distance runner, because this engine is also equipped
with Silitech cylinders, which run in prematurely and the piston seizure then causes a failure.
Followers of this channel already know which engine this is. In my opinion, the OM642 is the
engine that Mercedes used to shoot down Vogel. Anyone who has bought a car with this engine
has left a lot of money with the corporation and taken the promise of the best or nothing
pretty seriously. Most of the time, however, after 100-200 thousand kilometers you are left with
nothing, rather than the best. This one doesn't have Silitech because it's a diesel engine and
the technology would be overwhelmed by it. But it does have thousands of other teething issues,
such as the oil cooler, intake manifold, injectors, turbocharger and of course the
problem, oil pressure. You can fix all of these weak points and then it's a great engine,
but in my opinion that's not really the buyer's responsibility.
