Construction of the Stays ~ part 2

Pre-modern Women's Fashion
178 followers
39 Video Views·Mar 1, 2025
♥ Construction of the Stays Part 2 ♥
I am sorry for how long it took to upload this video! I hope you enjoy it!
The pattern I used is the 1740's stays from corsets and Crinolines by Norah Waugh https://amzn.to/2DDtVJL
The link above is an affiliate link, so if you decide to purchase the book I may receive a small commission. It doesn't change the price of the book, and these funds help me to continue to purchase materials for new videos!
I started off by marking the placement of the eyelets with a disappearing ink pen on the stays.
After that, I used an awl to make holes in the fabric, trying to get in between the weave
instead of actually breaking the thread, so the fabric, to make it stronger.
I then used a crochet hook to make the holes bigger. I used a couple different sizes so I
could get it to the size I was happy with. After completing the holes, I moved on to making
the eyelet buttonhole stitch. I will put a link in the description to a tutorial that I found quite
helpful. I marked around the eyelet hole with a disappearing ink pen, just to give myself a
I reinserted the awl just to make the hole wider again. I found this helped to keep my stitches
making my own binding tape. I found the easiest way to do this was using a half inch bias tape maker.
Once the binding was ready, I used a combination of a backstitch and a running stitch to secure
the bottom of the stays, I found I got a cleaner look if I marked a guide before sewing the tight
turn at the top of the tabs. I also found that using the ladder stitch helped me to control
where the binding was going. I'll post a link below to an article with more tips on binding stays.
Once I got to the end of the tight curve of the tab, I moved back into a running stitch.
After finishing sewing on one side of the binding, I then found the center at the top
of each tab and put a pin in it. This made it easier to find the exact center for when pulling
side of the stays, I then proceeded to pin the rest of the binding around the tab.
After that was finished, I secured all the bindings in place with a quick whip stitch.
With the binding complete, I then added the lining with a quick whip stitch.
Hey guys, I hope you enjoyed part two of the construction of the stays. I am sorry for how
long it took to get this up. I really underestimated my hand sewing skills
and how quickly I could get it done. For the next video, I'm going to be taking a slight break
just because life has gotten really crazy with a new job. So I'll be having a new video posted
sometime in November. Like and subscribe and let me know what you think below. And also,
I want to know what you guys are dressing up as for Halloween. I'll see you guys soon. Bye!
