LEARN TO STEAM SILKY MILKY IN 5 MINUTES!

Momma's Refreshments
442 followers
What's up everyone, Lance Hedrick here and today we're going to do an extremely abbreviated
refresher or first primer, whatever it is, on steaming silky milky. So real quick,
hit that subscribe button. I'm going to be doing a lot more videos and I would really appreciate
the support. All coffee stuff. I'm going to be doing a lot of a series on quick tips like this
one. This will be a quick five minute video on how to steam milk. So let's get to it because
it's going to be quick. It's gonna be fast paced. This will be a great refresher for those of you
who have already learned how I did my exhaustive tutorial linked right there and it'll be a great
primer for some of you or if you're a quick learner, this may just be enough. You don't
need to go through my 20 minute video. But anyway, here it is. Let's go. Two important things when
steaming milk. You need to understand pitcher position and movement up and down the wand.
Okay, pull the wand out essentially as far as it'll go. If you have a machine like the
Gaggia Classic Pro that's only like so, what I recommend doing is taking the tray out so that
you can have more room with your pitcher to tilt it. But anyway, let's continue. Let's assume that
you can pull your wand out. You're away from the tray. Here's the steam wand. First thing we're
going to do is align the steam wand along the back and then we're going to keep the steam wand.
We're going to keep a connection between the steam wand and the spout. Okay, steam wand and spout
always stay connected. But to begin to find our position, we're going to line it against the back.
Then we're going to tilt the pitcher. We're not moving the steam wand. We're tilting the pitcher
to halfway. Halfway from front to back. Boom. Halfway from front to back. And then we're going
to tilt the pitcher once more until it's a quarter to the side. Either way. Quarter to the side. Either
way. Doesn't matter. So we're doing halfway and a quarter. So to break that down even further,
if you were to be looking at your pitcher from above, you divided it halfway from front to back.
Here we go. Ding ding ding. That's where we're going to put our wand. And then from side to side
if you divided it into fourths. Here's a fourth. Here's a fourth. Here's a fourth. We're going to
put it in the halfway and a fourth on either side. Halfway and a fourth. Okay? Remember that.
Halfway and a quarter. Halfway and a quarter. Halfway and a quarter. Bada bing bada boom.
Alright. Next thing that we're going to talk about is wand depth. So once we have halfway and a
quarter, we're going to ride our milk pitcher up. We're going to keep connection on the spout. We're
going to go halfway. We're going to go a quarter. Now look from this side angle. This is the depth
we want our steam tip. We don't want down here. We don't want above where it's surfaced. We want it
just barely submerged at that halfway and a quarter. Maintaining connection to the spout.
Alright? So this is how we're going to start it. Then what we're going to do is once we have this
distance, this depth, we're going to start our steam wand. And then we're going to slowly pull
down until the steam wand tips surface and you hear a ripping paper noise. Let me show you this
here in a second. And then once the temperature of the pitcher matches the temperature of your hand,
you're going to slowly re-submerge the tip. Okay? Now of course as you're adding air,
the volume of the milk is going to grow. So whereas we may pull down to here, you're not
going to need to go all the way back up to that original position relative to the steam wand
because now there's milk foam. So instead, your movement up may just be subtle. Or you may not
need to move at all if you have steamed enough foam to allow it to cover the holes by the time
you're done stretching. So real quick, we're doing halfway and a quarter. That means we take that
steam wand, we ride the back of the pitcher, this is just to get our angle, we go halfway and a
quarter. You see I'm tilting it? Tilting it halfway and then a quarter. Okay? Once we have halfway and
a quarter, we're going to get that steam tip position. So halfway and a quarter and then we're
making sure that steam tip is just barely submerged. Because this has such a long steam tip
from the crevice here to the bottom, I'm only submerging about half of it. If you have a smaller
steam tip, you can submerge the whole thing. If you have an even longer steam tip, like on a
you can submerge maybe a third of it. But we want about that much submerged, just enough to where
it's not stretching. And when I say stretching, that's a term that just means injecting air into
the milk. Okay? So we're going to stave off that stretching. So anyway, here we go, halfway and a
quarter. This is what it will look like when you turn it on. I'm not injecting any air until I pull
down and see the air being injected. You see that? No air injected. Injecting air. No air injected.
Stretching. Not stretching. Stretching. Okay? So that is what I mean when I say stretching and when
I say whirling or not stretching. It's going to whirl the whole time because we're doing halfway
and a quarter. That position with the steam, with the pitcher tilted and angled is going to allow
for a rapid whirl. Okay? But with that going up and down just a little bit, we're going to inject
air and then when we go back down and we allow the tip to be submerged, we're going to incorporate
the air we've injected. Okay? So I'm going to do it once with milk and then we're going to be good
to go. All right. And so the final thing we're going to do is actually steam some milk so we get
a feel for how quickly it changes versus water because water heats up a lot faster. Because this
has a lot more fats in it, obviously, a lot more relative to none. Anyway, here we go. We're going
to ride up that steam wand like so. We're going to go halfway. We're going to go a quarter. Then
we're going to turn it on, put our hand on it. We're going to pull down to lightly stretch.
We're injecting that air like you saw on that side. We're just going to inject that air until
it matches the temperature of our hand. We want that pitcher to be around 90 to 100 degrees,
matching the temperature of our hand. Then once it matches, which it does right now, I'm just
resubmerging the tip. You see I barely moved because the steam, the injection of air has
increased the foam level so much so that I don't need to really move the pitcher. That tip just
gets submerged easily. So I'm letting it whirl and whirl and whirl and whirl and whirl and whirl
until I incorporate all of the foam that I've created in order to have some silky, silky milky.
All right, now it's too hot to the touch. This is our cue to end the steam.
And once we got that steam wand off, we are done. All right, that is your quick little five-minute
how to steam milk tutorial. I hope you enjoyed it. If you enjoyed the brevity of this video,
please give it a thumbs up, share it with friends, share it around. That'll really help.
Leave some comments below. Let me know how you liked it. And if things like this,
refreshers on past exhaustive tutorials are helpful for you. Thank you so much.
I hope you brewed something tasty today and cheers.
