Easy Watercolor Cone Flowers and Lavender (Beginner Watercolor painting)

Collect Watercolor Paintings
41 followers
Join me for these easy watercolor Cone Flowers (Echinacea) and Lavender. A great beginner lesson for those just starting out with watercolor flowers.
#FineArts #Arts #watercolor #watercolorpainting #painting
Comments are disabled for this video.
Well, hello there. Welcome back. I'm Shana Searcy from Umbrella Arts Academy.
Fully caffeinated this morning, so I'm really excited to be here to paint with you today.
We are going to be tackling two flowers for this Floral February video.
We are going to be tackling the lovely cone flower, or echinacea, as well as lavender.
These two are beginner projects and they are really fun to paint and really easy to do with
a little bit of patience. We are going to be using seven colors, so quite a few colors,
but I will put the color list up here so you can see it as I go over it.
We are going to be using coracrodone magenta, as well as gamboge yellow, cadmium red,
and Payne's gray, and a little sap green, and that is for our cone flower.
And then in addition to that, we're going to add in ultramarine blue and cadmium yellow,
which we're going to add in for our lavender. So that's seven colors. Any version of those
warm or cool reds and that coracrodone magenta will work. Whatever brand you have is perfectly
fine. I'm going to be using core paint. If you want to check out the description of this video,
you can find a link to the supplies I use every day, as well as recommendations I have for
beginners who don't want professional level supplies yet. You certainly don't need them
to start learning. I'm going to also be using a size six Princeton Aqua Elite brush. Any round
brush will do, but you do want it to be a little bit on the smaller side for today. Lots of little
details in these flowers, and you want it to have a nice tip on it. So find your best small round
brush that you have. And then lastly, Arches 140 pound cold press, 100% cotton paper. Whatever
cotton paper you have is great. Even if you don't have cotton paper and you have cellulose or wood
pull paper, that will be perfectly fine for this project. This is not a water heavy project, so you
should be good. And you can see a lot of fun little magic happen as we continue to layer on
some colors and paint on any type of paper that you use. All right, so I think we're all set. I'm
excited to paint with you, and let's get started and go to that overhead camera. All right, so here
we are in the overhead camera, and here are two samples. Now I'm going to be combining these two
flowers into one piece. So I'm going to be putting in two cone flowers, and then two stalks of
lavender. And all I'm going to do with my pencil is just map out kind of where they're going to be.
I'm not going to draw the flowers out completely, but these little round half moons here are just
going to be the tops of the cone flower, the center area. And then I'm just going to put in two
stalks for where I want the lavender to be. So this is just kind of setting me up compositionally.
I'm not going to go crazy with the drawing. That is all going to be done with my brush to create
the shapes of the flowers. The first color I'm going to be using for the center of my cone flower
is going to be a combination of the gamboge yellow as well as some quinacridone magenta.
You can see here to make this bright, beautiful orange color. So the very top of that cone flower,
the center of it is a bright orange color. And I'm going to be using the tip of my brush,
you can see here, to just create a staggered domed shape towards the top. So two of those,
put those in. Now all of my petals are going to be coming down from this center,
but we need to create this bright orange top to the center. And then we're going to be layering
in some darker colors as we go down and come closer to the petals. All right. So for my next
darker layer, I'm just adding in Payne's gray to this orange mixture, and it's going to give me a
very dark, deep brown color. And I'm just going to add that wet on wet. So the top part is still
a little damp, as you can see, as some of that color bleeds in. And I'm just adding that down
to the base there. And we are going to add one more layer at the very base that's even a little
bit darker, creating this nice graduated look from that center where it touches the petals is
going to be the darkest all the way to the top where it's the lightest and brightest. So I'm
just adding in some straight Payne's gray now right at the very bottom, being very careful not
to add too much. I don't want it to overwhelm. And now I'm just going in with a pretty clean brush
back to the top to create a little bit more texture and add a few more fine details at the top.
All right, let's mix up some of our magenta next. And I am going to just add this to my palette,
pull a little bit out and add a little more water. I want to lighten it up quite a bit.
Now I'm going to use just the shape of my brush and my brush stroke to make these petals,
starting at the center closest to that center stamen area. And I'm going to pull my petals
down and away and curving them. So you can see on the right hand side, they make a slight curve to
the right and on the left hand side, they make a slight curve to the left. And I am going to be
sketching some of these in leaving a few little white spots there, as you can see. And then as we
get to the petals that are in the back and further away, they are going to start to get a little
shorter using some foreshortening effects as they curve around the back of the flower.
You want to create the illusion that they are moving away from you. And if you actually sit
and look at one of these cone flowers, you'll see see that top petal is shorter than the one next
to it. And that creates the illusion that it's moving back and away from us. All right, next,
we're going to pull out our sap green to create a stem, and we're going to go right from the center
of where the flower is and just bring a nice line down. Whoops, you can see I got a little bit too
close to my paper there and actually put some sap green on my petal, but I am going to fix that.
No worries. So we're going to go in just with some darker magenta and a little bit of water,
and we're just going to blend that out. No big deal. Accidents happen.
So I am going to put a second layer with some additional color to really make these pop
onto those petals. So the first thing I'm going to do is take my quinacridone magenta,
and I'm going to introduce a little gamboge yellow to that to make a very bright and vibrant orange
color that's really more magenta than yellow. So we don't want it to be really orange, but really in
the magenta family. And then I'm going to re-wet my petals and just drop in wet on wet a little bit
of this color closest to the center. I'm not going to bring it all the way out to the end
of the petal because I do want to create this multi-colored petal that gets darker and more
vibrant as it gets closer to the center. I'm going to do the same thing here on the other flower.
All right, so I'm going to let those two layers dry together, and I'm going to move
on to the leaves of my cone flowers. And these are going to be long and somewhat wiggly or squiggly
leaves. I'm going to use the tip of my brush to go up, press down, drag, and then kind of give
it a little squiggle at the end. And I'm going to do that a couple of different times to fill
we have to wait for the rest of our cone flower petals to dry. So we're going to move on to our
lavender. And lavender are super easy. They're these tiny little blooms, clusters all around a
center stalk. And we're going to use ultramarine and quinacridone magenta to create this lovely
purple color that does have more blue in it than pink. So we do want it to be a very blue purple.
And we're going to start with these little kind of three-petaled clusters of blooms right at the
top of the stalk. And I'm going to be using the tip of my brush and the shape of that round brush
just to work my way down to create these little bloom clusters all the way down. Leave
some gaps in between because that's where our stalk is going to be, which is going to bring
the whole piece together. But you can see here I'm not overthinking it. I'm just working my way down
petal after petal, cluster after cluster. And then I'll go in and drop a little hint of additional
color kind of right in the center of where these blooms are, where they might meet the stalk.
And this gives it a little bit more depth where the end of the flowers or petals are a little
lighter than the center of them. And now with my sap green paint I'm going to find the gaps between
those blossoms and petals and just add in little hints or suggestions of that central stem
all the way down the column and then down to the stem where it will meet some leaves at the bottom.
And I'm just making some very simple leaves with the tip and the belly of my brush. So I'm going
from tip to belly and then back up to tip creating some nice soft little leaves at the base of that
stem. And I'm going to repeat this whole process once more with my second stalk of lavender.
So we're going to revisit our cone flowers and I've mixed up into that darker color we used
earlier that was a combination of our cadmium yellow and quinacridone magenta as well as a
little Payne's gray. So I'm adding some more quinacridone magenta to it to make a very dark
pink or almost a deep red color with all of those colors combined. And I'm using my rigger brush so
my fine liner rigger and I'm picking up some of that color and just adding some fine details
right from the center of the cone flower. So tucked right in there next to the center and
then just coming out to the edges not doing too many and making sure not to pattern anything. So
that's really hard to do when you're when you're starting to add texture details to things to not
create patterns. You know don't give every single petal one line or two lines all of the same shape
and height. Make sure to vary it as you go because organic subject matter like this like our flowers
will have many different varied shapes and textures. So just adding that in to create a
Payne's gray I'm going to be adding in some darker details on to the stems and then using just some
Payne's gray I'm going to take that rigger brush and add some very dark deep tones right to the
edge of the center of that cone flower. Again just really pulling out and enhancing that
dimension of those center areas making sure they have lots of texture they have light areas and
darker areas. All right so here we are with our finished pairs of cone flowers in lavender.
Thank you so much for painting with me today. I'm Shaina Searcy from Umbrella Arts Academy. Don't
forget to check out my studio crew and my supply list in the description of this video. Thank you
so much for being here today. Happy painting and enjoy the rest of your day.
