#aquamarinering#JewelleryMaking#Goldsmith In this week's video, I take you through the process of how I created this Platinum Aquamarine & Diamond ring, step by step. From working with platinum to setting the stones, I’ll share the techniques and skills that bring fine jewellery to life at the bench. In this one, I also share my approach to how introducing balance in the design process with a stone of this unique size.
Whether you're a jeweller, an apprentice, or simply fascinated by traditional craftsmanship, I hope you enjoy following along as this piece takes shape.
If you find the video helpful, don’t forget to like, share & subscribe for more goldsmithing insights.
Let us know what you think! If you have any questions, suggestions or experience of your to share - please leave them in the comments - we love hearing from you! Thank you for watching.
Lots of love Jaco & Damia
Welcome back to my channel. My name is Jaku.
Behind the camera is Demaja as always.
In today's video, I'll show you how I made this ring out of platinum and an aquamarine diamond.
Let me explain to you how I got this ring.
I've been working with this customer for many years and I know what jewelry style she likes.
This ring was a bit too simple for her. She wanted to add diamonds, as she always does.
We thought and brainstormed how we could add more stones to this existing ring.
And at the end of the day, we decided to simply remake the entire ring.
If you plan precisely and the customer knows what she expects, you will always notice that she is always satisfied when you keep your promises.
It's just a recipe that works.
I had to bring this stone to its full proportions and bring it to a reasonably small finger size.
That's exactly where the challenge lies.
I know that it is a kind of standard that worked because the customer wore it.
And I want to make sure that we introduce a new standard and then be able to compare the two.
I want to know where I can improve and that is not possible without looking back at the past.
How do we bring this huge stone to the same level with a very small finger?
What elements can I use to loosen it up so that this ring has presence?
If what I have written down makes sense to me structurally and optically and I can simply implement it, I will invest a lot of time and effort in the version itself.
And if you know how I make my jewelry, I always start with a stone and work my way down.
I will make two rectangular cases.
We don't press them, we don't pour them.
That makes them magical.
We want to challenge ourselves to create something absolutely symmetrical.
And that is possible.
I make these two steps because I have a big stone.
I try to break the stone.
Otherwise, the height of the stone would be a problem in terms of the optical effect of the stone itself.
I make sure that all areas on which the stone lies on these rectangles are placed evenly.
So I only finish it when this side, that side, this side and that side all touch evenly.
If that happens, the stone lies absolutely flush while it is in its place and hangs.
It sits here and it sits over there.
I look at the distance that these two form.
My design didn't actually have this distance.
But that's exactly what I meant when I said how things develop during the practical production.
While I was busy working on it, I came to the conclusion that this little groove would actually be a very nice feature.
I took this distance and added small platinums to the corner and put everything together.
I will drop the upper part of it like this in all angles.
Small diamonds around a small, large stone like this or a colored stone direct the attention to the large stone.
So my intention was to present the diamonds, but not on a flat surface.
That's why I put the upper part at an angle so that it points outwards.
Through the oblique surface, the stone is broken again from this height and falls down to the ring.
But now I also want to put the lower part in order.
I make two separate rings, which are the diameter of the actual ring finger size,
and bend them to create a small frame structure due to the volume of the stone.
Here, too, I am looking for something that is structurally strong.
And secondly, the stone will become smaller again due to the use of thicker platinums like this.
The special thing about these three parts, which I have made so far for the version,
is that I have adjusted each part specifically to the angle of the stone.
I don't have to cut away anything to bring the stone down.
The upper part, the middle part and the lower part thus set the stone at its angles.
How do I connect the top with the bottom?
If you look at my design here, you will see that I have created pillars that hold this structure together.
They have to be strong.
I make the pillars with the idea that I will add larger diamonds.
I use an armrest triple to start with very small curves.
I now compare this angle with the actual angle of the frame.
I want the strongest connection at the connecting points, which I can only get.
I file in flat areas here, so that more surface is created when soldering,
as there is more surface there, as the M letters show.
I don't work with exact numbers and dimensions here.
I always work with a little excess.
Therefore, I fix these areas that I have filed to the points where I will solder them to each of the corners.
And if they are in their place, I mark exactly how long they will probably be.
With this type of ring design, there cannot be too much industrial-looking strength,
because we do not build anything that only serves the architectural pleasure.
It is for one person.
Remember, I work clumsily, but at the same time I also want movement.
It develops from the ring upwards.
And so I get this design to work.
So I file these small columns to a rejuvenation.
I also file them a little thinner.
And I still have all the thickness and strength that I may need.
But I just hid a part of it in some way.
I visually mark where I have to cut these claws away now, so that this area is absolutely flush.
As soon as I have marked them, I start with a small carbon disc and just cut them straight.
There are areas that I can no longer reach when everything is connected.
Now it's time to take everything apart and clean it as well as possible.
After the claws have now been cleaned inside, I can bring them back and attach them to their final positions.
I will nail them where they hit the double frame.
I attach them to the double frame.
I do not solder them together yet.
And why am I doing this?
Because I can move them to a single pivot point.
The worst thing you can do is to make the joint itself crooked.
Since it is such a large structure, you would immediately see that.
I can now take the stone and glue it together.
So I artificially insert it and then add these parts together.
While the stone is in the mold with the laser, I fix the rest.
Then I take the stone out.
And now it's time to bring in the solder.
Now we have to heat the platinum until it is as strong as possible.
These small corners form a small triangle, because I built the mold in this way.
I have these small recesses, which are perfect for the cracks, which I will make next.
The double frame gives me double strength.
Note that I make them higher than they should be.
We do not work with the right size, but with one too large.
In addition, in such a case, I have a lot of leverage due to the lever effect,
to bend the claws on the stone before I cut them.
The lever effect is important when it comes to sensitive stones.
Are aquamarine sensitive stones?
All stones are sensitive.
I'm making a ring for the ring.
The ring needs a ring.
The customer wanted this cluster version to be connected to the ring itself,
which I also recommend, because it is a very entertaining way to distract from the height of the stone.
Something else you should pay attention to.
I'm going to put the ring together in two parts, so to speak.
We work here with certain elements.
I work with a finger size and also think about how high the ring should reach for the actual version.
If we do this with massive metal, it would be completely impractical in terms of weight.
These are the two parts I have to work on.
Now I have to put something in there to fill it.
And I'm going to use the plate construction.
We're going to melt it all together.
So what do we do when I say melt?
We're going to melt the entire plate together.
We're going to make a piece of separate plates.
It was tricky to get that into a round shape that looked like a round whole.
Here's an optical illusion that I kind of like.
It was a challenge for me because we have such a high top and such a rectangular object that I'm building right now.
Remember, when I put plates together, they're just plates.
It's square.
By pushing the plates into these grooves and not putting them outside, but into the grooves,
I was able to put a piece of metal in a corner that I could then sacrifice and round off.
The folding method also contributed to the rounding effect.
Optically, it's round.
But if you look closely, it has two straight walls and one up.
But since these walls were pushed in this fashion, I had some solid material here that I could sacrifice.
And then the stones themselves, because they are scattered, create a kind of blur to a rounded effect.
Why do I want a rounded effect?
I want to approach the customer I know.
I want to bring in a little femininity.
I want it to be a little round.
I want a solid ring that gently fits into all of this construction.
I use the room as well as I can with symmetry.
So I think about how I can arrange the stones symmetrically.
And when it comes to where the parts meet, I pay attention to the spaces in between.
That's the way I put all the stones together.
And when I have used the stones and there is still material in between, I divide it up.
I want to achieve the effect that you can only see the diamonds and the small pearls in between.
Basically, I plaster the whole thing so that it is scattered.
The whole thing shines, the individual quality of a diamond loses its purpose and the entire surface becomes something glittering.
That's what I want to achieve.
I look at the version and my original design.
And what's missing is this gap.
Since there are two parts, I have now created a spot that has a weak spot.
So I'm going to put small supports between these little grooves, just four supports.
And I can then use smaller diamonds in these supports.
If you start in this business and think, one day I want to do something like that, then don't give up.
Because when you get to the point where you are as spoiled as I am and make such jewelry, it just doesn't get any better.
You immerse yourself in a world in which you are simply bound by what you do and when you look back afterwards.
And that is especially true for these videos.
When you look at the techniques and so on, I can't say whether I would have done it the same way the second time or the other time.
I'm in such a role that I never look at the thing because I only analyze small parts of it.
But when it's done, it's part of this satisfaction and then the customer just says, wow, that's amazing.
Thank you very much, thank you very much for your support.
Thanks for the comments.
We're really trying to get back to it as soon as possible.
I take away from what people say, that this handmade thing is about to die out.
That's not the case.
It's getting more and more refined.
It may not be the usual.
Maybe it's easier and cheaper to pour things and get them from suppliers.
That's no fun.
We enjoy it.
We live from what we do.
And there is much more appreciation for what we do.
See you next time.
Until next time.
Bye guys.
Cheers.