Got a Ginger Bug? Make Fizzy Probiotic Drinks!

Momma's Refreshments
442 followers
Got a ginger bug?
Now let's turn it into homemade fizzy probiotic drinks.
If you don't already have a ginger bug,
I have a video on that linked below.
Let's make some drinks.
How much ginger bug to add?
First of all, we don't need the ginger
to make our fizzy drinks, just the liquid.
Most of the probiotics like to live in a liquid
at this point anyway.
Here's a general rule.
Strain out one tablespoon of ginger bug liquid
per one cup of juice.
So for a 16 ounce bottle, AKA two cups,
you would use about two tablespoons of ginger bug liquid.
This amount provides enough microbial activity,
yeast and bacteria to kick off this second fermentation
is what it's called, resulting in carbonation
without overwhelming the flavor.
Now I'm terrible about adhering to any of this
because I don't like to measure,
and that's the beauty of it.
Just know that the more ginger bug starter you add,
the faster the fermentation is gonna happen
and the more fizz you'll get.
Use less, things will happen a little slower
and you'll have a little more subtle fizz.
Best bottles to use.
Glass bottles with swing tops like I have here
are great for building up carbonation.
Make sure to leave a little space, like one or two inches
to allow for all the fizz that's gonna happen
when you open this thing up.
Some people use plastic bottles.
I dislike plastic in general,
but just know that acid is gonna be produced
by your ferment, and acid increases the leaching
of plastic chemicals into your beverage,
so it's a bad combination.
You could also use a special fermentation lid
like this one, for example, that allows CO2 to escape
so you don't even have to worry about gas building up.
You could use a regular old mason jar
and put the lid on nice and tight,
but you will have to remember to burp your bottles,
which means you're just gonna take the lid off for a second,
let some of the gas escape, and then put it back on.
Same with these, just like this.
Just remember to burp your bottles, or jars, or whatever,
at least every 24 hours to avoid an explosion.
You could also just use a loose-fitting lid,
not have anything screwed on really tightly
if you don't care about building up carbonation,
and then you don't have to worry
about remembering to burp anything.
How long to ferment?
Once your ginger bug and juice are all nice
and together and bottled, leave at room temperature
for 24 to 48 hours-ish.
Could be a little bit more, could be a little bit less.
And again, keep a close eye on this.
Check every 12 hours if you're not used to fermenting
and you don't know how things are gonna ferment
in your house, especially if you have a really hot house.
The warmer the temperature, the faster the fermentation.
70 to 75 degrees Fahrenheit,
or 21 to 24 degrees Celsius is a great, happy place.
When you're happy with the level of fermentation,
refrigerate.
This will drastically slow the fermentation
and preserve the fizz and keep things from exploding.
What juices work best?
You can ferment almost any juice that has sugar in it.
Getting juice that's pure juice is optimal
to avoid additives that may harm your microbes.
Feel free to use fresh fruit as well.
I like to use strawberries or raspberries, for example.
So I'll usually put in some ginger bug liquid,
then I'll add fruit, and then I'll add some filtered water
to just top things off a little bit.
You might wanna add a little bit of extra sugar
to speed things up, or not,
depending on the flavor you want
or how quickly you care to ferment.
And on that note, you can also ferment things
a little bit longer if you wanna reduce the sugar content.
That's generally my strategy
because I'm not a big believer of a lot of sugar.
I don't think we need that much in our lives.
Just don't ferment too long
because then you can get alcohol buildup,
unless that's what you're going for.
How to scale it up?
If you wanna make a big old bottle of soda, plan ahead.
Make your ginger bug bigger.
So add more water, feed it with more sugar and ginger
so it's nice and active,
but you have plenty of liquid to then add to this.
Think about it this way.
You've gotta have a larger quantity of ginger bug liquid
to take over and ferment this larger quantity of juice.
If you use less,
you could still eventually get things fermented,
but it could take a lot longer,
maybe five days instead of 24 hours.
Just to give you some ideas,
this one is basically a ginger ale that I made.
So I added my ginger bug liquid
and then I had some extra ginger pieces that I just boiled.
I took the water from that once it had cooled completely,
I added that, then I added some sugar,
which the microbes are gonna feed on,
and got myself a ginger ale.
And then I'll ferment this a little bit longer
than some people might
just to reduce the sugar content a little bit more.
It's nice and bubbly.
I hope this helps.
I hope you enjoy introducing some new gut-friendly microbes
into your life.
And a lot of this can be applied to Waterkeeper as well.
I'll have those videos linked below.
Remember to eat real food.
And I'll see you next time.
Oh, we gotta do a taste test.
This is the pomegranate.
So good and fizzy.
No SodaStream or whatever they're called needed.
