MTB MODIFICATION | How to Install HYDRAULIC BRAKES in any MTB

BICYBLE SHOW
111 followers
Many people have requested me to make this video
I had made a video before but it was a very old video
and it was a video of 203mm installation more than conversion
So I thought to tell you about Hydraulic Convertion
Are you going to face any issues?
Is it worth it?
Is it worth investing so much?
First of all, we will find out everything in this video
So quickly subscribe to this channel
because I will keep bringing more such content for you
First of all, this is a mechanical disc brake
What happens in this is, you will press it like this
So the work you are doing here will go to the disc
Now what is the problem in this?
You have noticed one thing
Whenever your cycle is not there, your brake is very perfect
If you hit the brake, your cycle skids
People are very happy with the new cycle
But over the time, you have to tighten the brake a little
It gets a little bigger
And the fun is not the same
Now I have a hydraulic brake in this cycle
The more I press on it, all my force will go there
And no matter how old the cycle is, if your hydraulic brake is fine
Your performance will be good
Now if it is a mechanical disc brake, you have to tighten it again and again
It is not fun at all
Its brake performance is consistent
The power is also good
And over the time, your brake never breaks
So this is the advantage of hydraulic
Whenever you do mountain biking, you need a proper feel
You want your cycle to stop at the same time
So that's why we convert it into a hydraulic brake
Now what happens in this is that a steel wire goes in the mechanical
Sometimes it wears out, sometimes it gets stretched
Sometimes it gets oxidation, lubricant has to be added
So there are some issues like this
On the other hand, in this hydraulic brake, you will see something like a pipe
But this is a brake line
And oil goes inside it
So whatever pressure you give, an oil will come
It will go inside it and it will give pressure there
Now this is the original brake stop
You have to change them completely
You will change this
You will have to change the caliper near the disc
It is an original disc, no need to change it
Now I will show you what you get in the kit
This is what you get inside the kit
Obviously, this is not a new kit
I have removed my old kit because I am currently using it
You will get two pairs
One will be of small wire, which will be of your front brake
And similarly, there will be another pair, which will be of the rear
This is the caliper, which is a mechanical caliper
It replaces it
You must be getting a red color tab in it
I will tell you the reason for this at the end
If I press it a little, you will see that it moves here
You can see a slight movement
With just a little movement, your hydraulic brake starts working
Let's talk about the pricing
This kit comes in India for around 4000 rupees
If you take it from AliExpress or order it from China
Then it is half price
It comes from 2000 to 3000 rupees
There is no need to change anything in this cycle
Remove this, put this directly
Your work is done
There is a problem in another type of shifter
Which is going to happen in today's conversion video
It is going to happen on the same cycle
Now the problem in this is that the brakes
Brake plus gear are combined together
So you have to separate it
What comes in this is that only your brake brake comes
Before I start installing, I will tell you a little advantage of this
First of all, there is self-tightening in this
Like if you hit the brake, you don't need to tighten it
Your brake will always be tight
In mechanical disc brakes, you have to tighten it again and again
If you have to service it again and again, then it is useful
Then its maintenance is very low
It is also very reliable
Even though you know that once it is punctured, it can be very bad
But in normal conditions, I have seen that your normal mechanical disc brake is more bad
Hydraulic disc brake is very less bad
Now if we talk about braking performance
If there are new bicycle brakes, then hydraulic and mechanical are the same
But after the time, the hydraulic brake remains the same
Mechanical breaks
So now we can say that the hydraulic braking is better than mechanical
Now let's not work too much, let's install it
But before that, I want to show you one thing
I wanted to do an unboxing, so the company has sent me this stuff
And this is Chapo
We are going to unbox it
It came a little late
I know
This DJI Osmo Action
Time is 1.35 am
Well, yes, I make videos at night, 10th March
So today is Holi
So I wanted to make Holi video from this action camera
But the problem is that the corona virus has spread
On top of that, it is so cold, so who will play Holi?
So I had to skip that video
But what to do, let's do its first unboxing
Let's see what we get inside the package
Oh, it's broken
I don't think they unbox it like this
I have no idea, I have never unboxed it before
Get out
Oh, ----
It opens from here
Oh, ----, should I open it from the top and sit?
You were writing earlier that it opens from here, humans
You didn't tell me
I just broke my box and sat
Oh, ----, how do I open this?
Dude, the idea of scratching a new camera is very good
And yes, this is the action camera that I am going to use in the future
So let's do the installation of the hydraulic disc in the background video
I am choosing this bicycle
It has Tektro's original brakes, which are mechanical brakes
And all my other bikes have hydraulics
I have already upgraded
So it's time for me to upgrade this too
There is no stand
Come on, the camera is closed
We will fill the air and remove the stand
It's going to take a lot of time
3.28 AM
Now what is the working style of this?
Your bicycle tire moves
To stop it, you have to move the thing on the side
Now you are pressing from here, it is moving well
But if I press it from the handlebar
By doing this, it feels very tight
Now my disc brake has two types of mounts
The original one is of the post mount type
It is like this
There is a very thin small brake in it
The normal one is of the standard type
Which comes in all bicycles
The post mount type also has adapters
Both cross each other
Just do one thing while taking it, google it
Is it compatible or not?
If it is compatible, then it is right
But generally, there is no problem
Generally, disc brakes come in the post mount type
So what do we do?
Remove the old brake
And install this one
This mount is the standard one
And if you have a mount like this
Then it is of the post mount type
This adapter converts the post to the standard
Remove it directly
Either you can remove it from here
Then you can adapt it
You can remove it directly from above
The old disc will come out like this
Simply, it is a very simple job
We will remove this red mount
Why did I remove the red mount here?
There should always be a disc brake in it
If I keep pressing it
These are self-tightening
So it keeps closing
And if such a point comes
That it can leak
So never press it without a disc brake
If you are removing your wheel
So keep in mind
As soon as you remove the wheel
Put this pad inside your disc
Let's place it here
And by doing this
It is placed directly on the mount
Normal brakes always have to be configured
It has to be adjusted
There are issues in mechanical disc brakes
There is another benefit of hydraulic disc
You don't have to adjust it
Just adjust it a little
Eyeball it
It will be absolutely fine
I am not using the new bolt
I will use the old bolts
These are the ones
I will put it here
I will break it like this in 2 days
It will be absolutely fine
And these brakes
You can remove it again
We can remove it
By doing this
Oh wow, everything is broken
Sometimes these things come off
It is made to break
But sometimes your things disappear
So let me tell you a hack for that
All you have to do is
You will see this thing here
You have to put the cable tie inside it
You have to put the brake hose
You have to close it like this
And it will be absolutely fine
You can cut it like this at the end
There is another advantage of hydraulic disc
If your mechanical disc is like this
And if you hit the brake
Then the brake will not be applied
It is applied easily in hydraulic
There is no tension
There are front brakes
I am removing it
What I will do for this
I will remove this ice mount
You have to take the mount
You have to put it like this
And then this thing
It will get stuck here
Like this
Now let's go upstairs
And its cockpit
We will go there and show you
How will it get stuck
These are the grips
You have to remove it like this
This whole shifter
It will come out like this
There is a problem in this
You will see here
The brake lever
And the shifter
They are combined
Now there are two solutions
What you can do is
If you want to save some money
So what do you do
This brake lever
Either cut it or remove it
And the shifter
Keep it
And you can slide it here
After that your hydraulic brake
It will be applied here like this
What is the second solution
You will have to change the shifter
In this way you can see here
Your hydraulic disc brakes are installed
This is MT200
Upgraded from 315
If you look down, this shifter is installed
You can put this shifter
If you want to fit properly
This was my short video
I hope you liked this video
If you want to see more videos like this
You can watch it on this channel
You are going to get more maintenance videos
I keep making all the cycling related videos
And thanks to everyone
Who made me the top cycling YouTuber of India
I am made by you
And I want to thank you
That you gave me such a good opportunity
And you follow me a lot on Instagram
You do a lot of DM
I get a lot of love
Let's end this video
This is Fahed Begum Wahoof
Signing off
