Note- NOTE: ALL THE IMAGES/PICTURES SHOWN IN THE VIDEO BELONGS TO THE RESPECTED OWNERS AND NOT ME... I AM NOT THE OWNER OF ANY PICTURES SHOWED IN THE VIDEO ---------------------------------------------------------------------------------------------------------
Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in the favor of fair use.
Hello friends, welcome all of you to Knowledge of Channel.
Let's learn together.
In today's video, how do we do electrical wiring
work or piping work whatever is required
in brick machinery?
How is that done? We are going to see its complete details.
Look, this is the construction of a house. There is
brick work in it and in between the brick work, it seems
as if some cracks have been made and piping has been done from there.
Wires etc. are inserted inside it.
Look, these are wires.
We call this concealed wiring.
Concealed wiring is like wiring that is located inside the wall. In the
olden days it used to have a
casing like strip on top
but now it is completely concealed. Like
the entire cable wire comes through the wall itself.
Look at this.
It also has a switch board. This plate is attached.
Look at this. This wire is also coming from the ceiling.
[MUSIC]
[MUSIC]
One benefit of concealed wiring is that
you won't see any strips or anything like that on the outside.
That wire comes completely from inside the wall.
Everything like connection etc is included. All the
switch boards etc. remain inside the wall itself.
[Music]
When you do brick work,
provision for it has to be made at the time of doing the brick work itself.
After this you will do plaster PO,
after laying cables etc., after pouring this
you can do plaster POP on it later.
And this wire has to be taken out and kept outside.
[Music]
See, whenever you do any new construction of a house,
you have to
keep this thing in mind after doing the brick work.
If there is block work, then after the block work is done,
it has to be marked with chariya or by
making groove etc. and the cable has to be sent from there
through the pipe.
You can see this whole pipe switch board
[MUSIC] You
can see this.
After the brick machinery work is done, an
electrician has to be called immediately to get
all this work done.
Look, the piping
proof cable wire of all these rooms is gone.
You can see this wiring above the lock.
Friends, if you are new to my channel, then
subscribe to my channel and
press the side bell icon so that
you can get notifications of all my upcoming videos.
[MUSIC]
[MUSIC]
This is an old house that is being dismantled and
reconstructed. At that time,
after the brick work is completed,
you can see the entire electrical work.
Electrical piping is all laid through it with wires.
In this we have to provide both one way and two way provisions.
Like there are different connections.
You can operate from both places.
[MUSIC]
[MUSIC]
You can see this.
You will
get to see different practical videos on my channel.
You will get to see all types of videos related to construction like interior, renovation etc. You will get
all the ideas about how to work practically.
[Music]
[Music]
I have made this video just to give you an idea
because after brick work,
electrical pipes etc. are put in it.
We pass the wire through it.
This has to be done Just before plastering and POP to see how it looks.
See how electrical work is being done in POP.
In POP,
framing is done first. After framing, you have to
give points for the lights wherever you have them.
The wiring has to be left out. You can see that.
Like a spot light or an LED.
For such different things, you have to make provision for lights.
Wires etc. have to be left behind.
I have already made a video on fall ceiling.
You can go and watch it on my channel.
You have to leave the wires according to which lights are there. In the same way as for
fall ceiling, first the
framing work is done, then electrical
wiring work, then sheet
fixing etc. After that, there is
electrical work like fixing lights etc.
Both these works happen
simultaneously. Like the framing one will
do with the false ceiling.
Will do electrical later. Then the fall ceiling ones and
then the electrical ones.
You can connect the fall ceiling light on a
single switch board or on
different switch boards or you
can even operate it using a remote.
[MUSIC]
So guys, here's our video for today.
How did you like today's video, please comment.
If you like it then please like it. If you are
watching my channel for the first time, then
subscribe to my channel and
press the bell icon on the side so that
you can get notifications of all the upcoming videos.
Thank you.
[music]