Watch as I strip away layers of old paint to uncover the hidden beauty beneath—taking a dated, Art Deco painted piece of furniture all the way back to its raw, natural wood. Follow along with this Amazing Art Deco restoration, it is definitely one of my more satisfying results!
I saw this on Facebook Marketplace and I was just so curious to see what was underneath all that
paint that I just had to buy it. It cost me 35 Canadian dollars. I didn't haggle. I figured
someone put a lot of time and effort into painting it in this elaborate way and it deserved the 35
bucks I paid for it. I was told by the lady who I bought it from that it was painted by her teenage
daughter and that she loved painting furniture. Well, I imagine it's lived a good life in its
current state and I'm sure it's brought a lot of pleasure to that young teenage girl.
But the vibe is not to my taste so let's see what's underneath all this paint. Fingers crossed
it's something good. It's still pretty cold here in the Toronto area but the forecast is for plus
10 degree weather for the next two days so I'm going to take advantage of it and use paint stripper
outside in the fresh air. My aim is to finish stripping and the initial sanding before I bring
it back into my basement workshop to finish it off. If you like watching this type of content
and specifically my channel, and if you haven't already, please hit the subscribe button. It
really does help my channel grow and the more subscribers I get the more YouTube sends my
videos out to new people. Thanks in advance and thanks to all of you who have already subscribed.
The paint on the first side of the dresser came off fairly easily. The paint on the top is a
story. I decided to add some plastic wrap to slow down the evaporation of the stripper and I moved
still a lot of dry patches so I scrape off what I can and then I just reapply more stripper.
You can see the strips of wood which have been laminated together and that tells you that the
top is not veneered it's solid wood. It's a light colored wood perhaps I don't know maybe a birch or
maple I'm just not sure. Here's a still photo. If anybody out there has an idea of what kind of
is the toner which would have been part of the original finish. You can even see if you look
closely a little bit of a faux wood grain finish just underneath it. The drawers are solid wood
just like the top. Out of the factory the wood would have had a faux finish to look like a higher
end wood. The original wood would never have meant to be seen. I think that's a shame so I think I'm
have to be committed to the stripping process knowing that it will probably take longer than
anything else. The drawers on this piece were probably the worst because there was that color
layer on top then a base layer then the original finish and not to mention all the decorative
cutouts that somehow needed to be scraped of paint. Not fun. But that's when a good audiobook comes in
the first layer that I've taken off. That's what it would have looked like originally.
And here is the little dresser naked once again. All the paint has been stripped at this point
and I'm going to start sanding. Well I have sanded a bit but I'm going to really start
sanding the rest of it all off and we'll see what happens from there.
Here's a good view of one of the drawers that I just finished sanding. Well it's not finished
finished but it started. It's going to take several passes. As you can see on the top
there's lots of flecks of white paint still left in the grooves and right here you can see at the
back on the bottom big stain of something or other which I'm going to have to figure out.
hardware in water with Dawn dish soap for a couple hours that the paint just started to fall
off when I moved it with my fingers. I was quite surprised. I didn't really expect that to happen.
I thought I was just maybe softening the paint up a little bit. All I can think of is it must
have been a water-based paint and the soaking effect of the water just melted it. So it came off
fairly easily after just picking at it with my fingers and then using an old toothbrush it got
most of it out. I had to use a dental pick to get a few little bits and pieces but yeah came off
and just cleaned them all up. The thought of putting you know clean clothes into a drawer
the bottom of the inside of the drawer so I started scraping it to get as much of it off as I could.
I ended up making it only worse so my solution to that was to remove the bottom of the drawer
and just reverse it so the good side was on the inside and the bad side was on the outside.
Okay here's where I make a really stupid mistake. Note to my future self don't do glue-ups late at
night. I decide to glue in the bottom piece at the sides to make the whole structure just more solid.
You know sounds like a good idea. You will notice how it's fitting right now.
Keep that in mind as you keep watching.
Well if you haven't noticed by now I haven't taken into account the cross piece that slides
up and down in the slot that I just glued. So if I don't put it back exactly where it was before
the bottom drawer may not fit. Well guess what? When I came back the next morning
and tried to put the drawers back in it did not fit. The drawer was too big and it wouldn't close
because the cross piece was too high. It should have been lower. There's an overhang on the
bottom of these drawers. I'll show you right now. Hang on a sec here. There's the overhang right
there. So I really only need to have just a little bit over an eighth of an inch maybe like a saw
blade's width off of the bottom of that in order for the drawer to fit. So I'm going to use my
track saw and because these are solid wood fronts should be no problem using the track saw to get
that little bit off. So that is the way I'm going to solve this problem and it should work. Now it
slides in and out without touching the bottom or the bottom of this drawer. So it's all good.
I have solved my problem. My goof down here is no longer a goof.
I'm using a technique here called water popping. I spray a light misting of water on the wood which
I have already finished sanding to 220 grit. This raises the grain and helps the stain penetrate a
more evenly. Once dry I will lightly very lightly sand with 220 again and then apply the stain.
I'm still unsure of what kind of wood this is. I know it's a very light colored wood and I know
I don't like the yellowish color so I'm going to stain it darker which can be problematic with
lighter woods. We'll just have to wait and see what it looks like. If you think you know what
kind of wood this is leave a note in the comments. I'd appreciate it.
After I finish staining one side of the dresser I noticed there were some weird
streaks going through the bottom half like I hadn't sanded properly. Don't know how that
happened if I missed sanding a grit or what but it just it looked really unsightly so I decided
to re-sand this side off. So I cleaned it all up and I went through the whole process of water
popping and staining again and on the second go around it looked much better. After staining the
entire dresser I kind of found the color not great. I didn't love it so what I decided to do is add
another coat of the gel stain on top of it and see if that would darken it down a little bit more
and it did and I was happier. To finish off the dresser I used my latest favorite top coat which
is Gilboy's hard wax oil. I love the ease of application it's really idiot proof and it leaves
a nice satiny sheen. I applied two coats leaving it overnight between the coats.
So
for those of you who are still watching you've made it to the end.
This redo is by far the most colorful paint I've ever had to remove and although
at first when I saw the wood underneath all that paint I was a bit disappointed
but in the end I was happy with the choices I made. I think that this young girl's whimsical
dresser is now looking like a classy older cousin. Enjoy the reveal!