Why Road Bike Geometry Matters #roadcycling #roadbike #bikelife

sports and sports
111 followers
5 Video Views·Aug 26, 2025
Bike geometry can be very confusing, but what do all these different numbers and angles
actually mean? Most importantly of all, how do they impact what your bike is actually like to ride?
To find out more, I've come to Sturdy Cycles in Froome to speak to Tom Sturdy,
the man responsible for creating these beautiful titanium bikes. Manufacturers spend hundreds,
if not thousands of hours testing and refining even the smallest of changes
to try to create the perfect balance between comfort, stability, and control for all of
their bikes. Geometry will vary between brands, different models, and even different sizes to try
to create a bike with the attended ride characteristics. However, geometry alone is
just one piece of the puzzle. It needs to work together with the frame design, the materials,
and the tube shapes. I want to speak to Tom to understand the hows and the whys and how he goes
around designing a bike right from the very start. Before that, let's have a recap of the basics.
Broadly speaking, cyclists have three main points of contact with the bike,
your feet on the pedals, your bum on the saddle, and your hands on the handlebars.
There are a number of different ways to adjust these, starting with the overall size of your
frame and refined by making adjustments with the seat post, stem length, and handlebar height.
While bike sizes in general are similar, a medium bike from one brand will be different
to one from another. Some brands just use actual measurements like a 56-centimeter frame.
These typically refer to the seat tube length, but all measurements and angles of the frame will
scale up or down with the size. The way in which manufacturers allow us to compare one frame to
another is through geometry charts, which show the exact measurements and where they're taken from.
Again, these vary from brand to brand. In reality, a geometry chart is just a snapshot
into what bike could fit you rather than what it will actually feel like to ride.
Over to Tom to explain why. The key thing to separate when you're looking at a geometry chart
is what's going to affect the size of the bike for a bike fit in terms of how tall you are,
what your reach needs to be, that sort of thing. Those numbers don't necessarily tell you the full
picture of how the bike's going to perform in terms of the handling of it. I think what's quite
useful is to try and separate those two things out a little bit because a bike for one of the
shorter riders who's going to buy a bike compared to a bike for one of the taller riders, the
difference in their height is going to be pretty big, but the difference in the size of their bike
actually will only be a few centimeters. Some of them are going to have a much bigger outcome
than others. Certain things like the seat tube angle, that is arguably not going to have a huge
direct impact on how the bike's going to feel to ride. A lot of that's to do with there are a few
ways that you can adjust what that will do. If you vary the seat tube angle on a bike design,
what you're really doing is you're moving the rider backwards and forwards. Of course,
at the end of the seat tube, you've got seat post and that seat post can have different offsets.
It can be an inline seat post or it can have 10, 20, 25 mil.
You've got some adjustability within the seat post, of course.
Yes, and then you've got the rails of the saddle as well. Simply changing the seat tube angle of
a frame when you're designing the frame may or may not actually move where the rider's weight is
unless you're also designing it in conjunction with the use of a particular seat post. For
example, if you're choosing a seat angle, you might want to run a steeper seat angle
because it moves this angle forwards, which creates more space behind the tube for bigger
tires. That's quite a common theme, especially now that bigger tires are becoming more and more
popular. If you want to make space for a bigger tire, you've either got to move that forwards or
you've got to move the wheel back, which would mean lengthening the chainstay. Often, steepening
the seat angle is going to be a preferred approach because you can do that and then use more offset
at the seat post. Actually, you can do it without changing where the rider needs to sit because you
can adjust that backwards at the top. I think the way to think about it is I like to try and
separate into what are the dimensions that's going to control how the bike responds to an input,
and that could be an input from the rider or an input from the environment like bump on the road,
a gust of wind, that sort of thing. What's going to affect how the bike responds to that? Then
the other side of that is what you feel through. The vehicle is going to behave in a particular
way and then you get some feedback from that. One of the most influential dimensions on the
whole bike is going to be the wheelbase of it. That's because although we think about bikes as
being a static thing, because that's certainly when you're looking at a geometry chart, the
impression is that it's a static thing. In reality, when you're riding a bike, it's an
incredibly dynamic situation. Even when you're riding in what would be described as a steady
state, so a road bike on a flat level road and you're riding straight along it, that's described
as steady state riding. Actually, in order to do that, you're balancing the bike, which means
that effectively, you're constantly falling over and making small adjustments to correct and stop
you actually falling over. One of the ways to think about how the system's working is because
you're constantly balancing, it's a little bit like balancing an object on the tip of your
finger. For example, one of these two objects, you've got one object that's really long, one
that's relatively small. If you were to balance one on the end of your finger, which one would
you think is going to be easier to balance on the end of your finger? You see, I'm already guessing
I could balance the ruler better because I've got more scope to try and counteract the movement.
Yes, that's exactly right. On one hand, this feels like it should be easier because it's a smaller
object with a lower center of gravity. It's going to be closer to your finger. You feel like
I should be able to balance that one more easily than this one, but instinctively,
you'd probably choose this one. That's because it's easier for you to control
because it's less sensitive to the movement of your finger, which means that if you over-correct
or under-correct, it's not going to fall straight off your finger where this one would.
That is the same logic that applies to the bike. How quickly does the bike change direction,
which is what's stopping you falling over, and also how that interacts with you because
you're part of the equation that's actually controlling it?
Road bike geometry has understandably evolved over time, but I feel like the evolution of it
has been small refinements rather than big changes because broadly speaking,
most people are going to look at the shape of this and go, well, that's the shape of a bike.
We've got the double diamond, the top tube's generally in a fairly similar place, but
how has geometry evolved over time and what are some of the ranges that we can
see, for example, like common sizes? Road bikes are definitely the most
mature type of bike if we're looking at the different genres of bike in particular.
Like you say, road bike geometry doesn't change by a huge amount and it's been fairly
settled for quite a long time. You would expect the head tube angle of a road bike to be
somewhere between 72 and 74 degrees is fairly common. On smaller sizes, it will go slacker
down to 71.5, 71. That's fairly common. Again, seat tube angle, you're going to see something
between 72.5 and 74 degrees would be a really common range. Again, extreme size,
you might see a little bit of a deviation from that. Basically, there's a set of numbers that
works for how people want to ride road bikes. There's lots of layers of reasons as to why
they've evolved. Someone coming from a pure mountain bike background will almost certainly
question what drop bars are for and why road bikes have got such a short wheelbase and why
they run such a long stem so that you're holding the bars by mountain bike standards like a million
miles away from where you'd be used to. A lot of those nuances have evolved because
road bikes have evolved, well, came off velodrome and track, but it's racing in a tight pack.
You don't want a really long bike. You've got to fit in a space. You've got to be able to get
through that space. You've got to draft off someone who's in front of you. What might be
implicit to someone who's ridden in that situation, i.e. literally every centimeter that I
can get closer to that person in front of me is a tangible benefit. You want to have a front wheel,
but you don't want the front wheel to be really far forward because then you can't get close to
ride in front of you. One of the ways that you can do that is to have these handlebars that allow
you to ride in that position, but the front wheel isn't then forwards of that again. There's layers
a bit like that of why certain trends have evolved on a road bike. Ultimately, just like I was saying
to understand how the handling is going to work, you've got to reference what you know.
It's the same thing. Those things have evolved and they work. The next iteration doesn't need
to be a million miles away from that. It could be, and it might be better in some ways. There
could be a really strong argument for having a road bike that does have a really long wheelbase
because it'd be stable at speed, but then it might be rubbish at riding in a fast group.
Speaking about the position of the front wheel, it feels like a really crucial thing to get right.
I think something that a lot of people perhaps wouldn't realize is that there's a difference
between that head tube angle of a bike, which is obviously matched with the steerer because it runs
through the middle of it, but then also you've got this variation here of the angle that the
lower section of the fork then follows. Something that I find confusing is understanding the
relationship between things like how we eradicate toe overlap or discuss the trail and where the
different angles and rates of the fork, how does this all link together? Give me some understanding
and explainer of the differences between the terms that people often see.
The steering geometry is a really important part of bike design. I think probably the dimension
that most people are going to reference is the head tube angle. That's literally this angle
here at this tube. Which is how the forks would sit through.
The angle of the steerer tube because that's the dimension that's nearly always going to be
published on a bike. Of course, that is a really powerful dimension because a very small change in
this angle, if you're projecting that all the way down to the hub and then where the actual tire is
going to touch the ground, a very small change will make a big difference down here. When you
adjust the head angle, you're adjusting the angle and the wheelbase, which we've mentioned.
The other really important aspect of the steering geometry though is that you have
an offset on the fork or a rake. That's the reason the fork doesn't just
continue straight in a straight line. Where the actual axle is or where the hub is,
is not directly in line with the steering axis of the bike. There's an offset which is
either called offset or rake. If you're not talking about bikes, it might be called caster.
The reason that that exists is it creates a dimension which is called trail. Which basically
means that if you project the angle of the steerer tube until it is touching the ground,
where that invisible line is touching the ground is ahead of where the tire is physically touching
the ground. Like a shopping trolley wheel, where the point of rotation is, is ahead of where the
tire is touching the ground. When you push a shopping trolley, you expect the wheel to follow
the direction that the thing is traveling in. That's what it does. That dimension creates that
stability in this rotation, which means that whatever direction the bike is going in,
the front wheel will follow that. That is in conjunction with the wheelbase of the bike.
Basically, you've got when the bike moves or changes direction, the wheel is going to follow
that. It gives that whole setup some inherent stability. If you didn't have it, then the rider
or whoever is on the other end of this axis, so you as a rider, you don't have anything helping
you to make the wheel follow the direction the bike's going in. It's a really, really important
dimension that controls the way the bike is going to respond to an input.
There are other factors that will affect the stability. For example, when you've got
a rotating mass, you get the centripetal acceleration of that wheel and the gyroscopic
effect of that adds stability. Essentially, that's going to be like a constant for the bikes that
people are looking at. The things that change that are going to affect that are predominantly
wheelbase, the trail that is created by a combination of the head tube angle and the
offset of the fork, and then some other things like the bottom bracket height, which is how high
above that footprint of the bike you are. Is that drawing a straight line from the
axles essentially? Yes. If we imagine this fork being in here and drew a line between the axles,
the center of the bottom bracket wouldn't be on that line.
Why does it always sit lower? By adjusting the bottom bracket height,
what you're really doing is shifting the rider up and down over the wheelbase, which is affecting
where the center of mass is because really the center of mass is largely tied to where the rider
is because they're the largest mass on the bike. It's another area, though, where there are other
things to consider because you could raise the center of mass by raising the bottom bracket.
That might be useful for some things. If you imagine balancing out on the end of your finger,
there's a point where having a higher center of gravity is easier. If you imagine riding through
a sandpit in a cyclocross race, you don't sit on the saddle. You get up out of the saddle and you
want to let the bike move. You want to isolate your center of mass from the footprint because
the footprint is going to be completely out of your control. If you're tied to it, then you're
just going to come up. There are certain situations where a high bottom bracket might be beneficial,
but you can imagine that if you make this too high, you literally won't be able to get on the
bike because the top tube will have to be higher. You're back to your constraints of not a product,
but the size of a person. You can't even climb it up over the thing.
With all of these, you don't ever really have free reign over absolutely everything. You're
always working within those constraints. Road bikes, in particular, have iterated towards
pretty similar solution. Most people are using, on the face of it, a very similar set of numbers.
A lot of that is tied to actually the use case of road bikes is also pretty straightforward.
Roads are roads and they haven't really changed for a long time, whereas other genres of how
people are riding the bikes is evolving much quicker. Yes, it does definitely tend to approach
a set of numbers that works, but whilst you can do it to a certain extent, it's not really
fair to say that you can isolate geometry completely from the rest of the bike design
in terms of the structure of it, what material you're making it out of, how you're physically
manufacturing it. All of those considerations are going to have an effect on ultimately how
the bike will feel. Geometry does tie into that. I've designed lots and manufactured lots of bikes
over the time I've been doing it and use lots of different materials to do that. There are definitely
trends that I would choose for a particular material versus another material. A lot of that
is tied to my understanding of some of the smaller that can be potentially difficult to
quantify. You get lots of people talking about how steel bikes feel to ride and how titanium
bikes feel to ride. It's not true to say that all carbon bikes are definitely going to be a
particular way, but the material does behave in a particular way and you can accommodate that
or you can design a geometry that's going to complement that. I would definitely bias a
geometry design one way or the other depending on how and what I'm making the bike from.
I'm lucky enough to be in a fairly unique position where I am the person designing,
manufacturing, and then we ride these bikes, we maintain these bikes every day. All of those
things are within my immediate grasp and they do all fold into how I would design a bike.
Yes, it's definitely true that I would subtly alter the geometry of a design if I was making
it in this way versus if I was using a different material like steel or designing a composite bike.
There's always another layer of considerations that are going to influence a decision that you
might make about geometry. That's a lot easier for me to do because I'm in direct control of
those things. Yes, you're one person, whereas I guess if you look at something on a mass scale,
I think a massive global bike brand, you've obviously got presumably a department or a
person going, this is the geometry one. Then you've got another department going,
well, this is how we're going to make it and they've got to work together because,
well, you tell me, but I guess you could have a really good geometry that really didn't work
because of the design of a frame or the materials or you could have a really beautifully made bike
and shapes and construction, but you could have bad geometry. Either way, unless they work
together, you're going to have what I assume would be a bad bike to ride.
Yes, that's definitely true. I think probably to put that in context, it wouldn't be a bike that
is impossible to ride. It'd be very hard for someone to make a bike that was unrideable
completely. Of course, the subtleties that we're talking about, it's definitely possible to
have a scenario where the geometry and the material or the way that the bike's manufactured
perhaps don't complement each other very well. The problem with that is that it's very difficult
to quantify that stuff. A lot of it is going to be quite subjective and it might not work for
one rider, but it might be okay or it might be fine for another rider.
It's a really challenging thing to be firm about, but it's definitely there and it's
definitely tangible. We put a lot of thought into trying to avoid that situation. Like I say,
that's probably a bit easier for me than it is for a much bigger company where the design and
manufacture are much more separate. I guess this leads me on to the fact that
you can create custom geometry within the realms of the constraints of what we've discussed.
You could essentially do whatever you decide works for this type of rider, this size of bike.
Obviously, manufacturers have spent years trying to hone a certain model of bike and go,
that's categorized what that bike feels like and defines it to ride. People go,
this certain bike, we all know that that's how it rides because this brand has spent the last 10
years making it and refined it along the way. Are there any examples you think of when
somebody would perhaps really benefit from having a bike designed specifically to them?
My assumption would be perhaps it's at the extreme ends of the scale of sizes.
Yes. I think that's definitely the most obvious application. Someone who is particularly tall or
particularly small, there may not be a bike that is a standard size that works for them and so they
might be forced to go and get someone to custom make them something. That's definitely the most
obvious application. We have a lot of customers who are in that category but a lot who aren't.
I think for those who aren't, the benefit are in those subtleties that we talked about.
A lot of that comes down to perhaps something as simple as me discussing or getting some
information from the customer as to what they like about cycling and trying to translate that into
experiences they've had before on a bike where, I don't know, they got terrified on a descent
riding a particular bike because the handling was completely wrong. It's definitely possible
to then look at that geometry, try and understand what it was about that geometry that didn't work
for them and then address that in a new thing. Often, those changes can be quite small but the
impact for the rider can be quite big. One area that is rapidly evolving and I think
perhaps pushing the boundaries of what's possible with design and geometry is the world of gravel
bikes. I'm assuming this is because of consumers and I guess an industry desire to try to keep
squeezing the fattest tires possible into the frame. What constraints does that put on design
and how on earth do you try to magic up extra space to fit a tire in?
With gravel bikes, the tire size is pretty much the challenge. The constant push at the moment
is for bigger and bigger tires. That does have an immediate knock on in terms of the bike design.
I think we've probably seen that in the wider industry with
gravel bikes. New generations of gravel bikes have been outdated really quickly simply because
they don't have enough clearance for riders' tire preference. Yes, it has a massive impact because
it's such a fixed thing in terms of the tire has to have space around it.
Also, the thing that you adjust in order to create space for that tire is a really important
dimension because primarily, you want to fit a big tire in, the bike's going to have to get longer
because you have to have space for the tire to not hit the tubes. There are adjustments that you can
make. We talked about steeper seat angles that are then offset backwards at the top so that you
don't affect the rider position too much. There comes a point though where you can only do those
things so much because, for example, you got the chain line of the bike where the chain is on the
chainring. One-by chainrings have helped that a lot because you lose a chainring that is further
in. Even with those, if you have the chainstays too short, then the widest point of the tire is
very close to where the chainring needs to be. Then you have the option, you need to move the
chain line out to move the chain out to make bigger tires. Then that suddenly starts to
affect not frame design but componentry design. It's happened on mountain bikes. Mountain bikes
have gone through different hub spacing standards in order to solve that problem. Hubs have got
wider and wider and wider as they've moved chain lines wider and wider and wider to accommodate
wider tires. I guess a good way to summarize and wrap this up would be, how do you envisage
geometry evolving in the future? What do you think could be the driving factors behind it or
perhaps the limiting factors to stop it evolving really? I think the things that force geometry to
change are the things that we discussed right at the beginning. If I were going to need to
design a bike to accommodate really big tires, and there's another conversation as to why the
customer might want those really big tires, but that is a thing that is going to force me to
change the geometry of the bike. We've probably even started to see that subtly on road bikes.
I haven't actually looked at the numbers, but just off the top of my head as road bike tires
or as the size of tires on road bike has just generally crept up,
you've probably seen a subtle change in some of the angles that we talked about,
like head angles. I'd say probably slightly slacker head angles are now common on
or more common on road bikes. I think with certain things,
road bikes in particular, there's a reason that it has been so stable for so long.
That is that it is a solution that works for what is now a fairly well-established
form of cycling. It seems mad to think that
you think one of the biggest driver factors is going to be the tires. Something that seems like
such a simple thing on the face of it, it's like, well, it's just bigger tires. Then you're like,
well, you've just skewed all this geometry off. Yes, it's a really big influence. I think probably
what you might though end up getting to a point where things become cyclical because
bigger tires are good for a huge number of things, but they do fundamentally change how the bike
behaves. They force a physical change in the dimensions that we've talked about, but then
there's all of the softer stuff like they literally feel different to ride. Actually,
we talked about trail, but a big tire. There's also a dimension called pneumatic trail, which is
a similar dimension but related to the size of the tire, basically. Then you've got a big tire,
lower pressure, the pneumatic trail changes significantly. Ultimately, it does feel
different to ride. There may well come a point where whilst the bigger tires are better in some
way, they detract from a certain feeling that you get when you're riding that means that people
actually don't want to go any bigger. Then maybe that's where the geometry ends up settling because
you don't need to start accommodating ever bigger tires. It's not the answer I ever thought I was
going to come away with talking about bike geometry that tires have really been the biggest
nightmare to sort out. I guess like a lot of things really, I suppose we're probably going
to see the limitations pushed and pushed and pushed until people feel like they've reached
that goal and then maybe we'll see it come back down again. I think tires are going to get wider
and wider and everyone's going to go, right, this really ruined every bike geometry, so let's dial
it back a little bit. Yes, I think so. Based on my own personal experience that I'm talking about
tires specifically, I've used relatively big tires on road bikes for a long time now but also I
haven't gone bigger and bigger and bigger because personally, the type of riding I do, there's a
point at which I feel like I lose some of the feeling that I get from a road bike when the
tires go over a certain size. Personally, I don't use over a certain size and I think I wouldn't
be surprised if other riders come to that conclusion as well. Over the time of bikes evolving,
if we go back a number of years, you would have a bike brand would just make the frame.
We've gradually seen that evolve over time to the brands now making their own forks,
their own components and accessories. Why do you think we've started to see a lot of this stuff
being taken in-house rather than buying separate components from different places?
Having control over as many of those critical dimensions as possible,
ultimately, that's what allows you to create a bigger end change for the end user.
If you're only making a frame, then you can only change certain geometry aspects.
Of course, the customer might be able to spec a particular fork that will affect the trail.
If you've got control over all of those things, the change that you might make to each one of
those areas might only be small. I think it's a case of the end result being greater than the
sum of its parts. That's certainly the approach that I take here is that by being able to control
those things, you can really have as much influence as possible over what the final
product will be like for the end user to use. Over the years, we've seen different extreme
designs and iterations of bikes. The first thing that comes to mind for me is perhaps the giant
TCL, this crazy compact design where I think visually, most people would be able to go,
hey, this bike is a totally different design. Can you think of any other examples where
brands have maybe pushed the limitations or even why do you think that was the case?
Yes, I think that's a really good example because it's one that I remember very clearly.
It is just such an obvious visual departure from what was the norm. In that specific case,
a lot of it was driven by manufacturing methodology. Bikes were going through an
evolution of having being made effectively tube-to-tube where you have a length of tubing
in any material, whether it was carbon or metal, whether that be steel or aluminum,
and effectively, they're cut and joined to the next tube. At that time, everything was shifting
towards more monocoque construction where they were using bigger molds to make larger sections
of the frame. It was a really obvious visual departure from what had been the norm.
I think that also is a good example of some of the limitations because when they were first
released, you went from having bikes available in sizes that were of 10-millimeter increments
in top tube length, so you might have five or six sizes for a model. Again, I might be wrong,
but I'm pretty sure those giants only came in three sizes, certainly for a while,
and that's because it was made in a different way. It had this whacking great mold that was
needed to make it that was really costly, so they didn't want to make 10 of them. They just
made three of them, for example. It was a big departure on one hand, but that came with some
consequences in terms of how many sizes the thing were available for. For a number of years after
that, you did see manufacturers tending to have fewer frame sizes and then they were made to fit
riders by adjusting the contact points like stems and seat posts and that sort of thing.
I think you do see that through different brands, don't you? Some tend to have a fairly limited
range of sizes and others, you've got smaller increments which take it back to maybe what times
would have been like in the past. There you go. That is a lot of chat about bike geometry.
While I knew it was a confusing and detailed subject, I've actually learned a lot of stuff
here speaking to Tom. I hope you found it really informative and helpful too. Please do get
involved in the comment section down below if you did enjoy this video. Also, if you have any other
questions about bike geometry, because I'm quite happy to ask Tom or answer them in a future video.
As always, if you want to support our channel and see more interesting and cool videos all
about bike tech, well then subscribe to GCN Tech and turn on your notifications.
Right, I'm out of here. See you.
