honda forza 300 front brake pads

so what's up guys i bought this front and rear disc pads for my honda forza so this is for front this is for rear i have to change pads for my front tire because it makes some noise and i think it's already consumed so this is ferrado front pads this is ferrado also rear pads but i am gonna change only the front for now so let's go so this is the brake caliper guys front front end this is honda forza so this is nissan we have to take this out but i think we don't have to take this wire here only this one so we're gonna be needing 12 millimeter this type or you can use a wrench automatic screwdriver phillips the pads and eight millimeter okay let's proceed we're gonna needing also grease so we're gonna take these two bolts here this is 12 millimeter so we're gonna be using this type let's loosen and first we're gonna loosen we're gonna use also this one this is the eight millimeter this is what take the pads we have to loosen this because if you take this away later it's very hard to unlock this from the disc okay so first you have to you have to put back the cylinder the cylinder is the brake but we have to clean it first so we take this eight millimeter this is what the pads intact makes it intact okay put to the side this is the old pad it's very used look very used that's why it makes some noise when i'm braking so let's clean this one the cylinder this is the clip okay after we put this back the clip is back we have to put it back this one because i'm gonna we put back the old pads because we're gonna push and push the cylinder back to its open position don't forget the tight to tighten this one this is the one that holds the pads okay some cleaning we have to pump the brake because the brake is loosened so we start the engine pump the brake so guys after you put the disc pads you have to wash the motorcycle because it remains a lot of oil a lot of dirt in the caliper in the disc brake so we have to wash this whole of it