How to make an aquarium cliff from styrofoam

This time we will make a panorama, this time it's a sea panorama. This is the size for the aquarium, the length is 100 cm, the width is 40 cm, and the height is 50 cm. Okay, just like usual, I have prepared a string wire. After that, we immediately pour the cement mixture. For the cement mixture, it's the same as in the previous videos. This is the first layer, and the other side has been covered with cement. We face the direction from the back, and this will be the outer wall of the panorama. Here I have prepared a filter box. This can be opened with a side filter. This is a glass lamp. The most important thing is the function. The filter box looks like this. The water will go through this side, and it will be made shorter. This side will be made shorter. Then it will be filtered, and it will flow to the other side. Then we will pump it out. I made it like this, because the top of this aquarium will be dusty. So, so that this filter box won't be too close to the back. We make it like this. This is for this filter. Because if it's too close to the back, it will be covered by the dust of the aquarium. So, it will be difficult for us to put the powerhead or the media filter. So, let's install it. Well, everyone. The construction of the main wall is finished. This is the main wall. Including the back wall for the sand. This is one, and this is the short one. Now, let's install the sand pipe. This is the installation of the pipe. Later, as usual, we will make a hole for the machine so that it can be seen. Now, we will make a space for the powerhead. This is a powerhead for sand circulation. If the powerhead is for filtration, it will be placed inside this filter box. Now, we will make the sand. This will be quite high. Later, we will make some pipes so that it can be broken like that. Later, I will try to make it here. Let's take a little bit from here. Just a little bit. Later, we will make it as if there is a rock here and water flows out. For sure, the sand has to go back here. The circulation has to go back here. So, even if it is turned around, the important thing is that it has to fall here. Even if it is taken from here, it has to fall here. Because the circulation is here. This is the input of the sand. It will be circulated up and back here. Let's close this first. I'm afraid that the cement will get inside. Now, I've made this. Later, we will break this. So, the sand will fall here. I've made this. Later, it will fall from here to here. As a fact, we will just close a small part. So that the sand that comes out from here, will be distributed from here to here. Ok, fellas. For now, let's leave this for now. Now, we're going to make the sea view. So, I'm going to add a higher wall on the back. Actually, the size is up to you. I'm going to take 8 cm. The height of this wall. The height of this wall is 8 cm. Later, we're going to give it a styrofoam base like this. Then, we're going to add more cement for the sea view. Why is it higher on the back? So that the view is wider. I've already cut it and measured it. We're going to put it on the top. This is for the sea view. Now, we're going to make a cover for the powerhead. We're going to cover it with sand. Then, we're going to cover the bottom with wire. We're going to continue to make this short brick. We're going to make a shape of a rock. I've already cut it. I'm just messing around. It's up to you. We're going to put it like this. The parts on the back will be hard to reach. We're going to cover it with cement. Like this. In this area, we're going to use some rocks. This is a real rock. It can be any kind of rock. The important thing is to clean it up. It can be any kind of rock. Why are we putting the rocks here? Because we're going to use a lot of styrofoam in this area. In the upper area, we're going to use the same styrofoam. So, if we use all of the styrofoam, It will be dangerous when it's filled with water. So, we're going to put some weight on it. We're going to put the rocks here. Also, as a decoration. Because the texture of the rocks is original. We're going to put it here. We're going to put it on the railway. Because we're going to run out of space. It will be stuck in the glass. So, we're going to turn it. We're going to make a hole in the railway. So, the railway will be lost in the hole. It can go anywhere in the hole. So, we're going to put it in the hole. Creatives! The shape of the brick is done. We're going to add a little bit of relief. Now, we're going to build the railway. Lastly, to reinforce the shape of the brick. To make it look like a natural rock. We're going to add the relief. The brick is done. We've added the relief. Now, we're going to put the tree. This tree is from the Senggali tree. This is the tree from the Senggali tree. We're going to apply it according to the shape of the brick. Creatives! The brick is done. Now, we're going to open the cardboard. Then, we're going to put it in the coloring stage. We're going to color it. First, as usual. We're going to block it with black. We're going to block this part with blue. Next, we're going to give the second color for the brick. That is dark brown. But in this part, this part of the hole. Just let it be. Don't add it. Let it be black. Later, we will give this motif white or gray. Then, for the last brick color. We give it a light brown color. We're going to apply it thinly. Especially on the edges of the relief. So that the character of the brick is more visible. This hole. Next, we're going to make a road sign. Just using white paint. Next, we're going to add the sound of the sea water. In this beach. In the sand. Using sand. We're going to give the effect of the sound of the sea water. First, so that the sand won't be muddy. Because this part is flat. So, we're going to use this part. So that when we sprinkle it with sand. It won't be muddy. Just a little bit. We're going to sprinkle a little bit of sand. On the part that we didn't paint before. We're going to use the effect of the sound of the sea water. Especially on the edges of the relief. So that the sand is locked. We're going to sprinkle it with sand. To make it more creative, we're going to make a bridge. The crossing of this railway. This is the bridge. The bridge above the sea. Then, we paint it with a silver color. So that it looks like a beach. Next, we're going to put a pole here. We're going to divide it into three or four poles. We're going to make it a concrete pole. Maybe three is enough. For the pole, we paint it with a silver color. So that it looks like concrete. Next, we're going to install the railway rail. Before that, to make it easier to install. We're going to use a pipe. We're going to make a small circle like this. For example, like this. Maybe it's hard to see. Then, we're going to use silicon glue to stick it. Then, we're going to stick the rail. We're going to stick the rail. Then, we're going to spray it with glue. We're going to add this bamboo house miniature. Alright, now we're going to install the leaves. The leaves on the tree. This is a synthetic type of premium mini golf. For how to install it, you can see it in the previous video. To make it short, let's just install it right away. These two poles, we're going to make it look like a coconut tree miniature. So, the leaves are different from this one. We're going to use a normal golf-type grass. We're going to cut it like this. After cutting it, it's going to look like this. Then, we're going to make it look like a coconut leaf. For the leaves installation, it's done. Now, we're going to install the grass. We're going to use two types of grass. This one is a golf-type grass. One centimeter thick. And the other one is a Swiss-type grass. For this one, we're going to cut it like usual. Then, we're going to trim it. So that it won't be too long. After cutting it, we're going to trim it so that it won't be too long. Because if we don't trim it, it will cover the character of this statue. So, we're going to apply it right away. We're going to glue it using silicone glue. It's very creative. The leaves installation is done. It's finished. So, all the steps are done. Lastly, we're going to decorate it. We're going to add a miniature car, train, and a ship. I've prepared it. Let's install it. Don't forget to give it a wave effect. Or water. So that the ship looks like it's floating on the water. The aquarium wall with a sea panorama theme is done. Now, we're ready to set it up. Prepare the aquarium and don't forget to install the sky background. Insert the tiles into the aquarium using the rope carefully. Install the powerhead for the sand. And this is the media filter. It's already installed. Also the powerhead for the filtration. Fill the water to the full. Add the imported silica sand to each place or container.