تجميع محرك رنج روفر - Assembling a 4.4 8V Diesel Engine for a Range Rover (Part 1) #rangerover

Of course, this is number 4, written here, towards the point here, like this. Of course, this is the first floor, towards the point here, like this. Of course, this is what is written on it, number 5, towards the point. Of course, guys, now we have installed the crankshaft and the camshaft. Now we have to tighten these bolts. These bolts are tightened in series. It is very important to tighten the bolts. First, we put 60 Nm. First, we tighten 60 Nm. Let's try it together. Now, we have tightened 60 Nm. The second stage, let's sit the engine a little bit in reverse. It will be 140 Nm. Let's sit the engine and tighten 140 Nm. Okay, guys. Now, we are doing the second stage. It must be tightened 140 Nm. Okay, guys. Let's tighten it together. Okay. Now, after we tightened 140 Nm, we rest the crankshaft for 10 minutes and tighten it 90 degrees. The last tightening. Now, we tighten the last tightening, which is 90 degrees. 90 degrees, as you know, is the fourth stage. Let's start tightening them all. Of course, we have tightened the crankshaft. The final tightening. The original tightening. Of course, we still have the side bolts. The side bolts are also tightened with Nm. Watch how I install the side bolts of the crankshaft and tighten them with Nm. Okay, guys. The side bolts. The side bolts are first tightened with 15 Nm. Then, we increase the Nm to 33 Nm. Now, the second stage. 33 Nm. Okay. The final tightening. The side bolts are tightened with 45 degrees, which is the third quarter. Now, if you don't have a hand drill, you can get a clock to tighten them. I know the approximate direction. 45 degrees. Let's start from here. It is the third quarter. Like this. Okay. Like this. Tighten them all like this. Like this. Okay. We have finished the side bolts. Now, we will install the side bolts and tighten them in the same way. Let's go, guys. Also, this side is tightened with 15 Nm. Also, these bolts are first tightened with 15 Nm. Then, we increase the Nm to 33 Nm. Okay. Then, we tighten them with 45 degrees, which is the third quarter. Okay. Now, we have finished the side bolts and the side bolts. We have installed the side bolts. Everything is in order. It is working like water. Okay. We have finished the side bolts. Now, we will install the side bolts. We will install the bolts and the side bolts together to install them on the side bolts. The first part is finished. We will start with the second part. I ask for your support for this video. I wish you to share it and leave a nice comment. God bless you all.