The Aerospace industry is a complex one with a ton of moving parts...literally. There isn't just one type of fixed-wing aircraft, AKA, planes. Aerospace Engineering has given us planes covering a variety of uses. Let's simplify each of those in this Aerospace industry primer.
▶️ Watch our other videos: • Automotive Industry Overview - Introduction
Key Sections 0:27 - Introducing Fixed-Wing Aircraft 0:51 - What makes planes, planes? 2:17 - One of the plane's competent systems: The Engine 2:57 - Let's explore Avionics: The plane's navigation systems 3:22 - What are the differences between aircraft? Airliners 4:48 - The Narrow-Body Aircraft Segment 5:23 - Let's explain Regional Aircraft
📚 This video serves as an excerpt from the Aerospace Industry Learning Primer, meticulously curated by the digital e-learning content provider, Primerli https://www.primerli.com/. The full module, comprising 10 bite-sized videos and quick quizzes, is tailored to empower professionals to grasp the industry intricacies in under an hour.
What industry do you want to learn about next? Let us know in the comments.
Enjoyed this video? Subscribe here: / @primerli
✅ Connect with us on LinkedIn: / primerli
Civil aircraft are those used for any non-military purpose, including commercial uses like flying
passengers or cargo on scheduled flights, and private or recreational uses. In this chapter,
we'll explore the different types of aircraft produced, the product segments. The largest
segment, and the focus of this primer, is fixed-wing aircraft, aka planes. Helicopters,
called rotary aircraft, and lighter-than-air devices, like balloons, make up much smaller
segments, together less than 10% of the total civil aircraft market. Before we launch into
the differences that define the various fixed-wing sub-segments, let's say a word or two about what
makes planes, planes. All fixed-wing aircraft have a few key common component systems. The airframe,
the engines, the avionics, and the interiors. The airframe is the structure of the aircraft,
and it includes the wings, the fuselage, the body of the plane, the landing gear,
and all of the so-called control surfaces. These are the elements that the pilot can use to control
the plane, like flaps for lifting the nose up and down, or ailerons for tilting the plane when
turning. Airframes must perform under tremendous stress while remaining as light as possible.
Some of the most cutting-edge materials, like aluminum alloys and carbon fiber composites,
are often used. This is particularly true for the wings. Wings need to be thin enough to efficiently
create lift, and strong enough to support the aircraft, which weighs hundreds of tons,
through all flight conditions. The companies that make the airframe are called airframe
manufacturers, airframers, or airframe OEMs, standing for original equipment manufacturer.
There are three principal manufacturers of large commercial aircraft, Airbus, Boeing,
and Embraer. These three alone have 90% market share. Airframers are like the conductors of the
whole orchestra. They make key parts of the airframe and then assemble the rest of the
aircraft from component systems. One of these systems is the engine, which generates thrust.
There are two principal types of engines, propellers, which spin and move air backward
to drive the plane forward, and jet engines, which draw air in, compress it with fuel,
and ignite the mixture to create a blast. There are also turboprop engines, which combine the two.
Turboprops are highly fuel-efficient, especially at the lower speeds used for regional flights.
Engines are massive engineering feats in their own right, and are produced by a separate set
of players like Rolls-Royce and General Electric or GE Aerospace. Another set of key components
are the various avionics, control, and navigation systems. These can range from simple sensors to
advanced autopilot software. Airframers may develop their own avionics or use solutions
developed by avionics providers like Honeywell Airspace. GE plays here as well. Last, there are
the interiors, seats, in-flight technology, and cargo bays. Let's turn now to the differences,
the types of fixed-wing aircraft. The largest segment and our focus is commercial-sized
aircraft. These are flown by airlines and are called airliners accordingly.
Airliners can carry passengers, cargo, or both, but actually the planes themselves are largely
the same in any case, only the interiors will vary. Airliners are therefore better segmented
not by what they carry, but what needs they fulfill. This is called the mission profile,
and is a function of the range, required distance, and load capacity, carrying weight limit.
The longest range missions, exceeding 8,000 nautical miles, roughly the distance from New York
to Singapore, and the highest load requirements, up to 500 passengers, are generally served by the
biggest planes in the world, wide-body aircraft. The Boeing 777 and 747 and Airbus' A380 are all
examples. As a heuristic, if there are two passenger aisles in the main cabin, it's a wide-body plane.
Historically, wide-body aircraft used three or four engines, called trijets or quadjets.
However, advances in engine technology and efficiency now allow twinjets, such as the A350
or B777, to perform the same missions with less fuel. The next airliner segment is the narrow-body
aircraft, like the Boeing 737 and the A320. These carry a smaller load, more like 100 to 240
passengers, and fly shorter missions, closer to about 4,000 nautical miles max.
Airlines, the buyers of these products, often prefer these narrow-body aircraft.
They are more fuel-efficient and are easier to fill to capacity. Running more, shorter routes
has been a winning strategy for airlines like Southwest, which exclusively flies the 737.
The final segment is regional aircraft, like the Bombardier Dash 8 and the Embraer ERJ190.
These planes have the shortest ranges, around 2,000 plus nautical miles, and the smallest
load factors, 30 to 100 passengers. There are smaller segments as well, served by smaller planes,
for example, private or recreational aircraft. These are made by companies like Cessna,
Gulfstream, and Beechcraft. There is also a wide variety of specialty aircraft that
addresses specific needs, like agricultural spraying or firefighting. Of course, even the
smallest of these planes are tremendously complex products. In the next chapter,
we'll explore the value chain that makes all of this possible.