I Bought All of IKEA's New Smart Devices - Major Mistakes.

Smart Home Devices
120 followers
2 Video Views·Jan 18, 2026
IKEA just released 21 smart home products that cost almost nothing.
$6 smart bulbs, $10 motion and climate sensors.
And they all work with Apple HomeKit, Google Home,
Amazon Alexa and every other Matter smart home system you might already own.
I bought every device that they had to find out if this is actually good or just cheap garbage.
I'm going to show you what's inside every box,
what happened when one device completely failed which might ruin the whole setup for you,
and whether you should actually buy any of this.
Let's get into it.
Full transparency, I didn't need to test these.
I already run a fully built smart home with Zigbee, Matter and Z-Wave across multiple platforms.
But when IKEA announced these prices, I had one question.
What's the catch?
So I bought everything that's available right now.
No sponsorship, no affiliate deal, just pure curiosity.
So here's what I got.
Kyplatz smart bulbs in three versions.
470 lumens for around $6.
806 lumens for around $10.
And a super bright 1521 lumen bulb for around $13.
All wirelessly dimmable with full wide spectrum control.
Bilrisa remotes in two styles.
Basic dual button for $8 and a scroll wheel version for around $9.
Magnetic backing, wall mount included.
And they can control up to three different lighting scenes.
MIG spray motion sensor for $10.
Yes, that's Swedish for mosquito spray.
No, it has nothing to do with what the product actually does.
Welcome to IKEA naming.
Dimmer flutter temperature and humidity sensor for $10 with a built-in display.
MIG vet door and window sensor for $8.
Klippbock water leak detector for $10.
And the Alpstuga air quality sensor for $30 that tracks CO2, PM2.5,
temperature and humidity all in one device.
Keep in mind that this comes without a USB-C cable and wall adapter.
So you would have to buy that on the side, add it all up,
and I'm looking at around $100 for a complete sensor suite
that would cost $300 to $400 from brands like Philips or Acara.
So yeah, the price is genuinely aggressive.
But here's what I needed to know.
Cheap smart home gear usually means one of three things.
Terrible build quality, garbage software, or it just doesn't work with anything else.
IKEA's old trod-free system had that last problem.
It used Zigbee, which technically worked,
but you needed their proprietary gateway
and integration with other platforms was messy at best.
These new products, completely different story.
Everything runs on matter over thread.
And before your eyes glaze over at the tech jargon,
here's what that actually means.
These devices will work natively with every major smart home platform
without any workarounds.
Apple HomeKit, Google Home, Amazon Alexa,
Samsung SmartThings, Homey, Home Assistant, everything.
No bridges, no translation layers,
no hoping someone writes a custom integration.
All right, let's crack these open.
First thing, the packaging is classic IKEA.
White and yellow boxes with product images on the front, minimal waste.
No plastic clamshells that require power tools to open.
Everything has a QR code for pairing on the box and on the device itself.
The bulbs feel solid.
Not cheap plastic that'll crack if you look at it wrong.
The remotes have actual weight to them
and the magnetic backing is strong enough that I stuck one to my oven
and it's still there two weeks later.
The sensors are where things get interesting.
The motion sensor is IP67 rated,
meaning it's fully sealed against dust and water.
You can mount this outside in the rain and it'll be fine for $10.
Most outdoor rated motion sensors start at 30 bucks.
The temperature sensor has a clever design.
Press it once, it shows the current temperature on a tiny screen
and then cycles to humidity level.
You don't need to pull out your phone just to check if your bedroom is too hot.
And then there's the water leak sensor.
Small disc, place it under your sink or next to your washing machine.
The moment it detects moisture, it screams at you and sends a phone notification
because one flooded basement will cost you way more than $10.
Now, the brain of this whole operation,
the Dirigera hub.
This is what makes everything actually work together.
It's a white cube about the size of a router.
Power cable on the back, Ethernet port, that's it.
Plug it in, connect it to your network and you're running.
Here's why this hub is actually special in 2026.
It's a full matter controller with a built-in thread border router.
Translation, it doesn't just control Ikea devices anymore,
it can manage matter devices from any brand.
It also acts as a bridge for old Ikea Trodd-Free Zigbee products.
So if you already own their oldest stuff, you don't have to replace everything.
The hub translates between the old Zigbee gear and the new matter ecosystem.
$109 in the US, about $70 in Europe.
For context, an Apple HomePod mini is $99 and a Google Home Hub is $129.
This is competitive, especially considering it's purpose-built for smart home control.
Alright, setup time.
And this is where I hit my first real problem.
The hub setup was dead simple.
Plug it in, download the Ikea Home Smart app,
scan the QR code on the bottom of the hub and it's connected.
Two minutes, done.
Adding the bulbs, easy-ish.
I screwed in the first two KiPlets bulbs, powered on and the app found them instantly.
Named them, done.
But the third bulb, that one wouldn't add.
The app just kept spinning and gave up.
So here's what I did to fix it.
I turned the bulb off and on six times rapidly.
On the sixth time, it blinked and automatically put itself back into pairing mode.
Then I unplugged the Dirigera hub, waited a few seconds and plugged it back in.
Let it fully reboot.
Then I tried adding the bulb again.
Connected instantly.
The motion sensor, temperature sensor and water leak sensor all connected on the first try.
And then I got to the door and window sensor.
The one I actually needed for my basement door.
Of course, unable to add device again.
Timeout error.
I tried three more times, same thing.
The app just kept spinning and eventually gave up.
Here's what fixed it.
And this will save you an hour of frustration if it happens to you.
I unplugged the Dirigera hub again, waited 10 seconds, plugged it back in.
Let it fully boot up, about 60 seconds.
Then I completely reset the door sensor by holding down its pairing button for 10 seconds
until the LED blinked rapidly.
Then I tried adding the sensor again.
Connected right away.
Lesson learned.
If a device won't pair, factory reset the device and reboot the hub.
Takes 60 seconds and solves most connection issues.
Also, make absolutely sure the hub is plugged into your network before you start adding devices.
Obvious in hindsight, easy to miss when you're excited and unboxing everything at once.
Alright, so here's my first impression after unboxing and setting everything up.
Build quality is solid.
Nothing feels cheap or plasticky.
The bulbs are well made.
The sensors feel durable.
And the remotes have proper weight to them.
That's a good sign.
Setup was straightforward.
Yeah, I hit a couple of connection issues with the bulb and the door sensor.
But once I figured out the reset procedure, everything paired smoothly.
30 minutes total, including troubleshooting, is solid for a first-time smart home install.
Most people would spend that much time just reading the instructions.
The Dirijera Hub itself is a no-nonsense piece of hardware.
Plug it in, connect to Ethernet, and it just works.
No setup wizard.
No waiting around.
The app is clean and minimal, which means there's not much to mess up.
But here's the thing.
I can turn these lights on and off.
I can see the sensor readings and everything is responding to my commands.
The real question is whether this holds up in actual daily use.
Are the sensors reliable over time?
Do automations trigger consistently?
Does the system stay stable?
Or does it start acting weird after a week and devices fall out?
That's what I'm about to find out.
So far, I'm impressed with what IKEA has done here.
For the price, the build quality is excellent and the setup process is genuinely simple.
But unboxing and setup are usually the easy part.
Real-world testing is where most cheap smart home gear falls apart.
That's why in the next video, I'm going to live with this system for two full weeks.
Daily automations, consistent use, edge cases, the whole thing.
I'll show you how reliable the sensors are, whether the automations trigger on schedule
and whether the IKEA app can actually handle everything it promises.
That's the real test.
If you want to see whether this holds up under real-world conditions,
subscribe so you don't miss that video.
It will drop in a few days.
Let me know in the comments what you'd want me to test
or if you've already got IKEA's smart home gear and want to share your experience.
Thanks for watching and I'll see you in the next one.
