Amazing idea! How to make a cute Hedgehog out of yarn - DIY NataliDoma

Hello Welcome everyone to my channel And let's continue with the Christmas special because there are still 48 days left In today's video I'll walk you through the steps with me medallion for the door For those who don't know me I'm Ana Paula Nascimento If you haven't already s subscribed to my channel—don't forget to subscribe Turn on the bell to receive updates My notifications Share my videos with your friends on your social media Like and comment on my post and don’t forget to follow me on Instagram And now let's move on to the step-by-step Many of you asked for a door charm tutorial I found the project very interesting because they are two decorations that hang from a ribbon cross over to the other side right Decorating and embellishing the front the back of the a door handle without having to drill a hole in the door right And it's very simple and easy to install So Alright let's get started Guys to make that middle strip where the decorations will hang The ideal would have been a 10cm tape but when I went to buy them the wide tapes were way too expensive faces right I really like this jute strap here check it out It's just 6cm though So what about What am I going to do I cut two pieces I'm going to join them and it'll be 12 cm long right But If you have a 10cm-wide tape handy that would be ideal for this So I'll gather all the tape here with the hot cola Done everyone Here's my tape see It ended up being 12 cm long width and height I made it 1 30m But just to remind you measure your door yourself and see where you want it to be Here's your escutcheon Do you want it above or below the doorknob That's just a matter of taste and Door size right I'm going with 1 30m because it'll expand once finished Then I'll pass the measurement to you Right now here in the middle section I'm going to apply this tape here The red velvet I'm going to apply it from end to end like this okay Alright everyone So this part of the tape is already assembled—I'll set it aside for now and move on to the next step I'm going to make this bond with you all People the bond I'm going to make with you I'm going to make using patches Why I'll tell you the story I went to buy the fabric that velve ere there wasn't anything else was there So I had to use what I had at home because I wanted to exactly that color There are other methods to make this knot much easier but I'm going to each you the way I'm going to do it because I'm going to reuse scraps got it So to make For this lace you'll need two pieces of this velvet here check it out—measuring 34 by 22 okay Now I'll take the wrong side of the velvet here and make a little hem on this side and this one Done Hey everyone check this out—I made the hem about two fingers wide on each side and now I'm going to fold it over Cut this fabric in half and I'll glue this part here okay And the bottom part too All done folks Look at how it turned out see Why did I leave that bar so wide Because when I put in the Cola doesn't show up on the outside of the fabric see Look that's why it's wide Then it ended up So like this with this opening right Well I've already done both parts check it out Guys you should Hearing some noise here—it'll be throughout the video because they're doing construction right in front of us My house isn't going to change is it I'm sorry about that guys Now inside here I'm going to add insulation This stuffing people is the kind used in pillows and cushions right There you go check it out I've put in the stuffing in both parts Now folks here I'm going to close this mouth I'm going to align it I'm going to use Line 10 because it's stronger right That kite string And then I'll do this on both sides Parts okay And check this out—here's how it turned out Now I'm going to join these two pieces together the same way using this Line 10 hey everyone Ready I've joined the two parts I'll set this aside now and move on to the leg loop To make the loop's leg you'll need a strip of fabric measuring 60 by 17 I made a small bar alf a centimeter here and now I'm going to turn it like this look I'm going to glue it right in the middle okay And here It has to stay at seven centimeters okay everyone All set I've gathered it here Now I'm going to make a Stick it here right in this spot I'll cut it like this Then I'll apply glue on both sides okay everyone All set folks check this out The loop's leg is already done I didn't add stuffing because the fabric is Double it's already cute For the bottom part to drape nicely this works better Just a reminder about this section of the The seam goes to the back right So here I'm going to fold the middle find the center of the fabric and bring it together here Right here I'm going to put this band folks But if you don't have one you can just sew this part together with thread Here you go—just look at how the bow is turning out Now to finish off the center of the bow I grabbed this ribbon here Velvet I took 10 centimeters off of it And now I'm going to do this see I'm going to fold it over and finish it like this because I think it looks cute That seam just ends up sticking out there you know But do it however you prefer Alright folks The ties are already ready You'll need two one on each end right E I forgot to mention to you all this velvet strip I used—guys it's 6 centimeters wide okay I used it here both in the middle and on the sides How about here And here I decided to use the whole thing because since the ribbon is wide it looks better whole So now comes the assembly part Once the ties are made and this section is done I'll need two 30-centimeter pieces of trim Look here folks this one's a real showstopper If you've got an old tree you're planning to get rid of you can use this reuse her branches or any other type of foliage okay So here I'll take this side this end here I'm going to grab this 30-centimeter piece and stick it on I'm leaving this end sticking out got it everyone So I'm going to glue it down s middle part here All set so I've arranged the big party here Now it's time to attach the bow So I'm going to Position him here look and I'll just paste the middle part okay All set look here I've pasted the bow right in the middle of the garland now Just start spreading the foliage I've set a few things aside here—your call on how to use them okay everyone If you want to put any kind of greenery there you can If you just want to put pine branches go ahead and do that okay And afterward you can also add little balls and other decorations Look I've already scattered the greenery here Now I'm going to add a little sparkle here right I'll place these golden balls holly berries and pinecones to finish it off Look at how it turned out I already had the other side ready so I just repeated the same process I used on the first side The finished scapular ends up at 1.5 meters got it everyone And here it is — the scapular I made with you today Look at this everyone how beautiful it turned out I loved the result right I made the tie in a different deconstructed way because I only had scraps But if you can get 1 meter of fabric you can make the whole thing and then just assemble it which is easier Or else buy the wide tape right I thought that was ridiculous guys The tapes are around R$85.90 I thought it was way too expensive so you can adjust it like I did here right Put it there however you like in whatever color you want You could make it green—it would look beautiful either way right Just this one detail here I think it makes all the difference And I made another one here that I'm going to show you take a look Look here folks This one right here the same tape I used here I also made a double knot So this one was super easy I took a longer piece of ribbon positioned it found the center cut the straps and that's it That's what I was supposed to do with velvet but I decided to reuse the fabric I already had here okay So this one turned out more neutral right It has a nice rustic tone but I also think it looks amazing If you want to add little creatures here it would also look really nice right And I want you to tell me in the comments which of the two scapulars you liked more Ah one little thing everyone This past Sunday I posted a video for you showing this little house I made with toothpicks—check it out Hey what happened The video went up and only afterward did we realize it wasn’t complete right So what did I do To keep the video on the channel I made the final part of the video which became part 2 I'll leave the final screens so you'll see the first and second parts of the video about these little houses okay Just so you can better understand what happened okay To avoid confusion I hope you enjoyed the video If you haven't subscribed to my channel yet don't forget to do so Turn on the bell to receive my notifications Also share my videos with your friends on your social media Leave your like and your comment Don't forget to follow me on Instagram And until the next video Bye-bye