My New House is NOT Smart (yet).

Welcome to our new smart home. Sorry, I should say dumb home since it's actually not smart yet. I can't wait to show you around. Some spots need some serious help, but I have big goals for turning this into an amazing smart home. Near the end, I'll share five home automation rules I set for myself. I wanna apply everything I've learned over the years to make this the best smart home ever. So hopefully this video gives you ideas for building your ideal smart home too. When moving into a new home, a top priority is a security system, but this one won't be like our last house. This house is 13 years old and it already has a hardwire security system from ADT. I've never used a hardwire system like this before, so I guess I could just activate it with ADT. Yeah, right, no way. I'm pretty sure I can replace the controller with something else to make it work great with my smart home. I'll be able to use all the hardwire sensors already installed, like the ones hidden in the doors, which is nice since I won't have to deal with batteries. I'll also have to figure out how to replace this wall panel. Oh wait, it's dangling off the wall and not even screwed in. I guess this will be easy to rip off. Now, the main reason why I moved to this house is because of this detached shop. It's where I'm filming right now. It's gonna be a dedicated place for filming content, testing out smart home tech, and I'm so excited about it. But there's a problem. The wifi signal out here is terrible. Yeah, that's not gonna be okay when I'm testing out smart home devices, so I need to bridge the network to the shop. I could dig a trench to have a cable run directly to it, but UniFi makes some pretty cool wireless devices that can extend my network out here that seem fast and reliable, so hopefully it's not too difficult and it works well. Okay, so one of the few smart home devices that did come with the house were these Honeywell thermostats. I connected them to the network, and they're fine. Definitely some limitations compared to Ecobee, which I'm used to. First, there's no extra temperature sensors, so it's only going off the reading of the temperature on the thermostat, and it can't tell if there's anybody in the area, so I think the combination of both of those is causing them to run more than they need to. Also, they're not automated yet, so when we leave the house, I forget to change them, so they just stick to the schedule. It's costing me, and it's adding up, so this'll be one of the first things I get dialed in for my smart home. We really like our new front doors, but this lock is built into the handle, so it's not your standard deadbolt. I think I've seen smart locks for this type of handle design at CES before, but I'm guessing my options are gonna be limited, so yeah, I'm still not sure what I'm gonna do here. But the backdoor lock, now this is what I'm talking about. It's less beautiful, but I can easily make this smart, so maybe it's more beautiful? We use this door more than the front door, like when I'm going back to the house from the shop, and being locked out is not fun, so it'll be nice to automate it. And speaking of the doors, making the garage door smart is actually a way higher priority for me right now. Not being able to control the garage doors for my phone, or knowing if I left them open, is so annoying. Luckily, the garage door controllers are a little bit older, so I think I can use RAT GDO on all of them. They even have a new disco version that has a laser on it to help you park, and you can run automations based on if the car is there or not, so yeah, sounds fun. All right, I have a confession. I swore off ring doorbells years ago, but look what this house came with. I know, I know, it's embarrassing. I haven't swapped it out yet, but I will. I plan to replace it with a Unifi doorbell, the same one that I used in my previous house. The reason I choose that is because I can record 24-7 to a hard drive in my house. Now, Ring isn't that bad, unless you haven't seen the Super Bowl commercial. Then you will know that privacy is an issue, and that's why I like Unifi, keeping everything local in my own house. Plus, it integrates really well into my smart home. I've shown how the doorbell can pop up on my TV and other cool automations in the past. I'll be showing step-by-step how to set everything up, so make sure you're following the channel. Okay, so what about security cameras? Well, I really wanna add PoE cameras again like we had before. That way, we'll have a hardwire connection, and I don't have to worry about batteries. Last time, I was able to pre-wire that during the new build process, but with this house, I'll have to add ethernet drops myself. So yeah, wish me luck. I've seen comments saying, why did you move? Your last house was smarter. I hear you, and sometimes I'm thinking the same thing. We're only halfway through this list, but I think it'll be worth it in the long run to have this dedicated shop for growing the channel, and hopefully that means more helpful content ideas for you guys. And while we're here in the backyard, you can see we have real grass instead of artificial turf, and this was a big selling point with three kids and a dog. We've been out here every day enjoying it. And you know what real grass means? Higher water bills, yes, but robot lawnmowers. I've been out of the loop since we haven't had real grass for years, so I'm super excited to test them out. Hey, more robots doing chores around here, the better. And this old school irrigation control is so frustrating to use. Allie wanted to adjust the watering time, so I walked out there with her and showed her how to use it. She came back into the house later and said, please just make that smart. That was horrible. Goal accomplished. Another thing I need to add is wiring for wireless access points. These are dedicated devices purely for Wi-Fi, and they're usually mounted on the ceiling. But you know where mine is right now? I don't even know if I can show you because it's so offensive. Fine, it's just sitting on the shelf, but hey, it's actually working pretty decent. Yes, I'm gonna properly mount it on the ceiling for a better signal and to hide the cord, and I'll probably cover that on my second channel. Also made a video over there how I got my server rack into this room, even though all the ethernet went to the garage. So you can go check that out later if you want. All right, I'm super excited for this room. It's gonna be our home theater, and it's bigger than the room that we had before. It's very echoey right now, so I'll obviously need to acoustically treat the room. There's also this cool-looking fireplace in here that I love, but why are there three outlets on it? One right in front of the fire, what in the world? As far as tech goes, I think I'll be switching to a long throw projector instead of the short throw one. I really like the short throw projector, but the kids were almost always bumping into it with their WWE wrestling matches, so a long throw projector that's mounted up high means less people messing with it. And don't mind the red stains on the wall. I'm sure nothing died over there. But for real, we're gonna paint in here and clear out all the stuff. And I know it looks a little rough around the edges, but I can see the potential. And for running speaker wires, it might be a little tricky since a couple of these walls are exterior, but I have a plan and I hope that it works. What's interesting is after we bought the house and we moved in, I looked up and I saw that there were random speakers built into the wall. I found these here in the living room and the garage, and I think the wires for these speakers are actually over here in these built-ins. Honestly, I'm not sure if I'll be able to use these at all, but if you guys have any suggestions about these or anything in our house, let me know down in the comments. Now, when it comes to outdoor lighting, hats off to the previous owners who had permanent holiday lights installed. These will be way easier than climbing a ladder to hang lights every December. The lights actually connect to Wi-Fi, so I tried out the schedule feature in the app. It didn't work, but I'm pretty sure I can pull these into Home Assistant and automate the lights that way. But either way, I'm happy to have these. Other than air conditioners, the next must-have thing here in Arizona are ceiling fans. And luckily, these are all over our new house, even in the bathroom. But I realized there's a big problem. You see, the way these can lights are installed directly above the fans causes strobe effect. If both the fan and ceiling lights are on, it looks very intense. Hey, I know I have a history of making my house look like a nightclub with RGB light strips, but I'm trying to improve myself here. For real though, these give me an instant headache, and some of these fans are controlled by a wall switch while others use a remote. But regardless, I'm gonna have to automate these ASAP so they aren't on at the same time. Out here in the shop, we have fluorescent ceiling lights, yikes, and they're in the garage for our home too. They're okay, but I'm definitely gonna wanna swap these out for LEDs. Now when it comes to window shades, none of these are smart or even motorized. They're all manual, and I guess I really took for granted having smart shades the past few years. It feels like a part-time job always opening or closing the shades because they're never in the right position. So I'm gonna make these smart for sure. Another big project will be lighting in here. There are no dimmers, and it always feels blindingly bright or so dark we can barely see. So I'll be adding smart dimmers for the ceiling lights and extra lamps with smart bulbs like this one. But you wanna know what the most annoying part is? Some of the lights are warm, and some of the lights are cool even in the same room. The worst offender is the garage light on the opener. It's almost hilarious how much this sticks out like a sore thumb. Maybe I should just keep it like this to teach my kids what color temperature is. One feature this house has that our last one didn't is a central vac. It's kinda broken right now. For some reason, it turns on right when it's plugged in and it won't turn off. I think I could add a smart outlet here to solve that problem. But I know these are kinda outdated with robot vacuums taking over, so we'll see if I use this or not. All right, you can see I have a lot of work to do to make my home smart. But like I said at the beginning, I want this to be the best smart home ever. So I set a few rules for myself to make sure this smart home is better than our last one. First, everything has to work locally, no exceptions. If it needs an internet connection to work, get out of here. I've seen enough internet outages and companies going out of business to know if a device doesn't work locally, it's gonna bring me long-term headaches. So I'll be mainly using devices that are matter-compatible, use Zigbee or Z-Wave protocols, and lots of other options like ESPHome. Rule number two, my smart home must be grandma-proof. Okay, I stole this one from Joel. I toured his smart home in Colorado, and I love the concept. Basically, you shouldn't have to use your phone or dashboard to turn something on or off. That way, if grandma comes over to watch the kids, she's not throwing out curse words because she can't turn something off. So if there's any kind of light, it better have a switch or button by the light switches to control it. Like this lamp has a smart bulb that can only be controlled by my phone or automation right now. Unacceptable. The third rule is really important. No unnecessary automations. I'm humbling myself here and admitting where I've gone wrong in the past with too many automations. Basically, I only want automations we need, not ones we want. Just because I can't automate something doesn't mean I should. And if the automation stops working, it shouldn't disrupt normal life. So yeah, no unnecessary automations. Let's see if I can stick to it. Rule number four is that I'll be using two main systems to control my smart home. Home Assistant and a little bit of HomeKit. Now, that doesn't mean I won't test other systems, but that will be limited to the shop. We're done having our home be a test tube for our own sanity. The only exception here is that I have to reluctantly allow Amazon Echo devices so my family members don't disown me, but they won't have access to our smart home. And the last rule might seem silly, but it will help me stay sane. Limit batteries wherever possible. I want to use wired millimeter wave sensors over PIR motion sensors. Millimeter wave sensors are really fast at detecting people now and way more accurate. And I hate when a sensor goes offline because of a dead battery. But obviously I can't eliminate all batteries, so if I have to use a sensor that needs batteries, it needs to take rechargeable ones. So those are my five smart home rules. And in the shop, I'm gonna be a little bit looser on the rules. That way I can test more smart home devices for you guys. But for a device to go permanently into our smart home, it has to follow those rules. I'm really excited to build out this smart home the right way and add a bunch of tech and automations. Thanks for watching. Dad, I thought you were mowing the lawn. Oh, the robot lawnmower's doing it. I'm not a robot.