Brisket Basics - An in-depth look at smoking a brisket. How to source, trim, season and smoke a whole brisket. #brisket#smokedbrisket#howtobbqright BBQ Brisket Basics
Find a good Brisket It can be hard to find a good brisket - depending on your area. If you have a local butcher - that is a great place to start. You can also find them in grocery stores, Sam’s Club and Costco. Make sure you give that cryovac package a good look. Make sure it's intact and there are no leaks. You want a brisket with uniform thickness across the flat, avoiding any thin or uneven areas. A little flexibility in the packaging is good - real good! That means the brisket has some age and has already started breaking down. You don't want it paper-thin on the flat end – that's where dryness can creep in.
Trimming and Prepping Time to get hands-on with your brisket! When I trim, I’m only focused on making it aerodynamic. I’m looking to round off the edges for better airflow over the brisket. I like to use a 5” semi-curved fillet knife to achieve those smooth, rounded edges. When it comes to fat, there's good and bad. Trim down the fat to about a quarter inch, leaving the hard, dry fat that will render and flavor your brisket. No need for excessive injections or tallow here – we're focusing on the natural beefy goodness.
Seasoning and Rubs For seasoning, we’re keeping it simple yet flavorful. Start with a base layer of your favorite beef rub. I love the savory punch of Swine Life Prime Beef. Next, layer on some barbecue rub for that classic color and sweetness that will caramelize during cooking. I’m going with my Killer Hogs Hot Rub. Then, for that authentic Texas-style bark, finish it off with a coarse blend of salt and black pepper. I’m going with my Killer Hogs TX Brisket rub as my top layer.
Fire and Heat Management Time to fire up that pit! Whether you're cooking on a stick burner, pellet grill, or kettle, the key is clean, consistent fire management. Establish a solid coal bed and maintain a clean fire. We're using hickory wood in our stick burner for that classic flavor. Maintain a steady temperature around 275°F – no need to rush, it's all about patience.
Cooking and Spritzing Place your trimmed and seasoned brisket on the pit, fat side up. This helps protect the meat and adds incredible flavor as the fat renders. As the cook progresses, spritz the brisket with a simple liquid mixture every couple of hours. This helps prevent drying on the top and edges.
The Waiting Game Cooking a brisket is all about maintaining a consistent temperature and resisting the urge to peek too often. Let it do its thing, and remember, it's a journey that takes time. When you're about two hours in, consider spritzing to keep that bark in top shape.
Final Temps There are a lot of final temps for the perfect brisket doneness. Some swear by 200°F, others say 205°F.. but it really comes down to feel. Brisket has to fully break down. While the internal temperature is a helpful guideline, the real secret lies in the texture. You're aiming for that magical feel when a probe or thermometer glides through the meat with minimal resistance. For most folks, this typically happens around the 200-205°F mark. Keep in mind, every brisket is unique, so don't be afraid to trust your instincts. When it feels just right, pull that beauty off the pit and let it rest, allowing those juices to redistribute and the flavors to harmonize.
Final Thoughts And you can use these “brisket basics” for cooking a brisket on any pit… a stick burner, pellet grill, or something else, these techniques apply across the board.
Remember, patience is key, and the rewards are oh-so-delicious. Until next time, keep those fires burning and those briskets smoking!
AI Generated·May contain errors
Video Summary
AI Generated
This comprehensive guide details the professional process of cooking a Texas-style brisket at home. It covers the entire journey from selecting a high-quality cut and precise trimming for airflow to managing fire temperatures and navigating the \"stall.\" The focus is on achieving a balanced flavor, a crunchy bark, and maximum tenderness through patience and proper resting.
So you want to cook a brisket.
Well, that's what we're going to do today.
Brisket can be one of the most difficult things
you've ever cooked.
It can also be one of the most rewarding things
you've ever cooked.
Brisket done right is absolutely delicious.
Today, we're going to show you how we source the brisket,
the kind of pit we're cooking the brisket on,
give you some tips and techniques
on how we cook a good eating brisket at home.
And you know, it's going to be good, Mark.
It's going to have to be good.
Let's get to cooking, y'all.
So we're cooking this brisket that we're doing today
on one of our stick burner pits.
I've got my outlaw fired up back there,
smelling good in this smokehouse.
It doesn't matter if you don't have a stick burner.
We're going to be going over the basics today
and they're going to apply to any pit.
So you can take that and apply it to your grill at home.
First thing to me when we're talking cooking brisket
is it's going to take time.
Brisket's not something you can hurry up.
We got an early start this morning.
Real early.
Somebody had to drive a couple of hours to get here.
No, I set my alarm clock, you know,
before the sun came up, got up.
I got me a good bed of Royal Oak briquettes going,
a couple of tumbleweeds underneath the fire.
And I just left the pit open.
I'm talking about open the cook chamber doors,
open up the exhaust 100% and leave the firebox door open.
I want to get a good coal bed established.
I want to let that smoke get out of there,
let it start drawing through the pit.
And then I'll go ahead and shut the doors
once my bed's established and let the heat from the coals,
the BTUs, heat that pit up.
You know, 15, 20 minutes, you got a good coal bed going,
it's time to start adding those splits.
Usually that's when I start checking my dial back a little.
I mean, I want it to slowly creep up to 275.
I'm not trying to give it all the heat it's got
and build a bonfire in it.
You could use just about any kind of charcoal you want,
any kind of wood.
We like burning hickory wood.
That's what we burn in our stick burners
because it's in our area.
We've noticed this a ton,
but the hickory and the hardwoods
keep your coal bed so much healthier.
You know, you maintain that coal bed.
When you start running fruit woods, you know, you lose that.
So you have to have that hardwood
throughout the cook process to maintain that coal bed
or you'll be fighting.
Whenever I'm picking out a brisket,
first I want to look at the cry vac,
make sure it hadn't been compromised,
make sure there's no leaks in it.
It's nice and, you know, got tight.
If the brisket's loose in it, that's okay.
If it's flexible, you want the packaging tight.
That means it's got a little age on it.
But what I'm looking for is when I grab the brisket
is a uniform thickness across the flat.
I don't want it to tail out too thin on the sides.
I don't want it to, you know, have any butcher cuts in it,
things like that.
Often you can't tell in the package.
You just have to go by feel,
but really if you'll just kind of go for something
that feels like it's a little pliable,
that the package is still tight on it,
doesn't have any leaks, oxygen hasn't gotten into it,
doesn't have any discoloration
and it has a uniform thickness,
that's a good sign it's gonna be a good brisket.
It's gonna be a little bigger on that point in,
but like you said,
you don't want it paper thin on that flat end
because that's what's gonna get dry
and that's what's gonna make you think you screwed up
and didn't cook a good brisket.
I did a home trim,
which is not as aggressive as you would go into a contest.
The way I look at it,
and it's kind of a lot along the ways
like Aaron Franklin teaches,
where it's about aerodynamics.
It's about airflow in that pit over the brisket.
I'm not trying to cut every single little thing off of it,
but I do want to make it smooth.
I want to kind of round it a little bit.
I want to take off any of the oxidized edges.
I want to take off any of the thick fat.
We cook this brisket fat side up
because we want a good eating brisket today.
We're gonna make a nice little crust on top of it.
But I took that fat down to about a quarter inch.
There's good fat on the brisket and there's bad fat.
And you'll notice that good fat will be that hard, dry fat.
And that's what renders
and that's what's gonna put that flavor in that brisket.
But sometimes I know you've probably seen on this one,
toward the flat,
you kind of see that slimy fat.
It's not something that's gonna render
and that's hard to cut off.
If you don't have a super sharp knife,
you're just gonna push it around on that brisket.
You ain't even gonna cut it off.
Every time I'm trimming briskets,
I always go for my little six inch semi-curved fillet knife.
The blade's real thin on it.
It's flexible, but you can get the thing razor sharp
and it's easy to get an edge back on.
And I do trim both sides.
Like I flip the meat side over
and we're gonna take out a little bit of that deckle fat.
The whole thing is we want this brisket to lay flat
on the cooking grate on the grill.
And so that's where that aerodynamic look comes in.
You gotta think we've got airflow coming from the firebox
through the fire chamber, then out the exhaust.
Well, we want that air to not be restricted
when it hits that brisket.
And that's gonna keep it from drying out, from crumbling.
If the air can flow right over it smooth
in an aerodynamic type way,
it's gonna be a better brisket.
But if you're cooking on a drum or something like that,
that the air flows more from the bottom up,
you still want that aerodynamic look
because like all your corners,
they need to be on a radius
because that's what's gonna crumble.
So like you were saying, radius them off
and make them smooth and you know,
the edges, no sharps, no points.
You know, you can do that with scissors.
You know, if you don't have a good knife,
you can take scissors and walk right around that edge
and just round off all the edges
and you're gonna still gain that same airflow,
even if it's on a pellet grill, a drum, or a stick burner.
Once you got it trimmed,
you gotta get something on it before we put it on the pit.
Now for a good eating brisket,
I'm along those Texas flavors
with a little bit of barbecue rub to it.
I used a base layer of your prime beef rub because-
I can't blame you there.
I mean, I want the savory.
I want that little pop of heat.
I want that umami flavor.
And it just goes with beef.
I mean, it just really does.
I love the prime beef.
Well, it doesn't cover anything up.
That's right.
It just melts in and you really don't even know it's there,
but you're like, wow, that's pretty good flavor, you know?
It's almost like a dry brine kind of a little bit.
And I didn't go super heavy with it on brisket,
but brisket can take the seasoning.
Next, I went with some barbecue rub.
I wanted that, you know,
traditional kind of a barbecue look to it.
That's where you get a lot of that color from.
You get some of the spice
and some of the sweetness from the sugars in it
to get it to caramelize some.
You could use whatever rub you want on a brisket, really.
And then to finish it off,
just a little texture with some TX.
That's that coarse salt, coarse black pepper.
If you don't have that seasoning,
you could use anything you want that has a coarseness to it.
I've used Montreal steak seasoning before.
I've just bought cracked black pepper
and like kosher flaky salt.
But to me, that gives you that authentic kind of,
when you think about brisket,
look to the bark and to the outside,
you're going to get it from those seasonings.
This is what I call a top flow offset stick burner.
So your heat's going to be mainly above that brisket.
I'm going to put the fatty point toward the fire.
Basically your fat is sacrificial.
You have to render it,
but also that fat's going to help protect all the meat
that you're trying to, you know, you want to eat.
Are you a fat up or fat down guy,
or does it depend on the grill?
It depends on the grill in my opinion,
but also it depends on the cook.
You know, what are you going for?
Do you want to build a good hard bark on that meat?
Or do you want to kind of start rendering that fat?
And because I know our heat's kind of more above
this brisket, we're going to put it fat up this time.
If you're cooking on a pellet grill,
the heat's coming from the bottom, cook it meat side up.
It's, you know, it's completely up to you.
I don't think one's better than the other,
but I think one could make your cook easier for your people.
It depends on your air flow,
and it depends on where you're trying to protect
that brisket, I think.
That's what I've always said when people ask me.
And when you trim that fat down to a quarter inch,
you have a better chance of rendering that fat
and getting it to flavor.
Like what I've noticed on a stick burner pit especially,
when you've got your heat running 275 to 300,
that fat can almost crisp up a little bit during that cook.
And that's a beautiful thing.
When you get that crunchy fat right on top of it,
I mean, you'll see at the end,
and I hope we get some of that today.
I can't wait.
That's what I love to eat.
So Mark, that's that first split
that I put in there this morning.
It's burned probably for about 45, almost an hour.
And see, there's your coals right there.
This hickory's already starting to make the coal bed.
You still have some briquettes down there,
but we're building a coal bed as we speak.
So that is perfect.
So Mark, right now we're at the easy part of a brisket cook.
It's just maintaining fire.
That's it.
Well, I say it's easy.
This is when everybody wants to go look at it, poke at it.
I said, you just gotta let it go.
You just gotta be patient.
How often should you be opening the cook chamber
to see what's going on in the cook chamber?
If it's the first time you've ever cooked one
or on a new pit, look at it in the first 30, 45 minutes.
That'll tell you, you know,
if your fire's running like it should,
or if the pit's running like it should.
But once you know your pit, don't worry about it.
You know, we're-
Don't even open it.
Our goal is to hold this brisket at 275
for most of the entire cook,
or at least until we get it wrapped.
But right now it's about maintaining temperature,
not having those drastic up and downs.
We want a good, even heat across it.
What about spritzing, or mopping,
or adding moisture to the brisket as it cooks?
So we're gonna spritz today.
I think that's a good way to really pinpoint
on like areas that's gonna dry out.
You know the top of that,
the very top of that brisket's in the hottest amount of heat
and the most airflow.
It's gonna start wanting to dry out.
That bark's gonna set a little quicker.
So we're gonna have to pay attention.
Same thing on your flat.
All the edge of your flat's gonna want to dry out
and get a little crusty.
And we'll spritz, and we may even shield that
with a little aluminum foil later on.
So what about running a water pan in there?
I know some people like in a stick burner pit,
they'll add a little moisture to the cook chamber
just to kind of mellow that hot air out a little bit.
You know, you get a little bit of that evaporative cooling
off that water pan, and it mixes
and puts a little bit of moisture in that pit.
Have you ever ran that when you're cooking briskets
or even in comps?
Right, so I mean, I've run it in comps before.
If we're not cooking many proteins in a pit,
like this past weekend,
we were just cooking eight slabs of ribs in a pit.
I ran a water pan because it wasn't enough protein in there
to produce that humid cooking environment.
Now, a lot of this, I'm gonna go back to location.
We're in Mississippi.
It's humid.
You know, we got a ton of moisture in there right now.
So a water pan isn't as critical,
but it is gonna do two things.
It's gonna help you maintain a lower temp.
You know, if your fire's wanting to get away,
or you know, you're running a little bit hot,
that water pan's gonna cool that cook chamber down.
Plus it's gonna add a little bit of steam,
a little bit of moisture to the cook chamber.
It's not a make or break.
Like I say, we're not running one today,
but I know what this pit's gonna do.
And I know what this brisket's gonna do.
And I know we can spritz,
and we can produce the same product
as if we were running a water pan.
It's just an option.
It's an option.
If you're cooking, you know,
if you have a smaller pit,
and you're cooking one or two briskets,
and that brisket's, you know,
taken up most of that cook chamber,
I wouldn't run a water pan,
because you're never gonna get that bark to set.
You gotta have a little bit of dry heat,
but you still want just a smidge of humidity
in that cook chamber.
Making it go and cook it last weekend, Mark.
You get that first place brisket
up there in the mountains, doesn't you?
We did.
I'm pretty proud of my briskets.
That's something that I think,
that's my favorite protein to cook,
because it's something that's a lot to learn,
and, you know, there's so many different ways to do it,
and there's so many different ways
to get to that perfect brisket.
You know, we can cook the same brisket side by side,
and I cook a little bit hotter,
and you cook a little bit lower,
and we'll finish at different temps.
You might take it to 202.
I'll take it to 210, but we have the same texture.
What's that difference,
the biggest differences that you think
in cooking a comp brisket
versus cooking a brisket like we are today,
where we know we're gonna eat it,
and we just wanna cook a good home brisket?
So a comp brisket is very, very rich,
and it's one of them deals,
you know that judge is only taking one bite, two bites.
You know, if you do your job,
they're gonna go back for that second bite,
but brisket like we're cooking today,
you can sit down and enjoy.
You know, you can, it's still gonna be rich
because it's brisket, it's got a lot of fat in it,
but you can sit down and enjoy it.
A comp brisket, you eat more than one slice of it,
you're done, you know, you're gonna be miserable
because we put so much into it.
We're injecting, you know,
we're seasoning this brisket 12 hours in advance
because I want it to basically marinate in the rub,
and then we're turning around,
we're coming back with glazes,
you know, we're coming back with au jus,
and we're trying to pack as much flavor
in that brisket as we can in one little bite.
I usually don't inject,
why don't you not inject something at home,
or what's the takeaway?
I mean, that's up to you.
Now, if I'm cooking a leaner brisket,
you know, if I buy a brisket and I get home
and I start trimming it,
I realize, man, this brisket's lean.
I might mix up a little beef broth
or just a little something,
but when you're cooking a protein,
you're trying to cook the moisture out.
That's what gets it tender.
That's the cooking process.
You're cooking water out.
So adding a bunch of injections to a brisket at home
is all it's really gonna do,
it's gonna slow you down.
The more injection you put in it,
the longer it's gonna take that brisket to cook
because you're having to cook that back out.
I think people don't think about that.
Like, when you do inject something,
you add that moisture like you're talking about,
it increases cook time every single time.
I mean, if you just say you have a 10 pound brisket
and you put one cup of beef broth,
you're putting an hour to two hours on that brisket.
So do you think you're better off just dry seasoning
and maybe letting it sit and dry brine a little bit,
hoping some of those flavors get down in the meat?
Because you're not gonna,
unless you've got a really long time,
and I've done it before in comps,
we'll season and inject our brisket overnight
and let them sit in the cooler
till we cook them the next morning
just because we want that time,
we want the flavor to get all the way through the meat.
We're really changing it.
But at home, my thinking is I want beef.
So I'm not trying to cover anything up with that beef taste.
I'm not trying to add anything down in the meat.
I'm gonna get the smoke as a flavor.
I'm gonna get my seasonings as a flavor.
I'm not gonna glaze it.
I just want that Texas-style brisket flavor
that I know that I love.
What's your thoughts on tallow before we roll into that?
You know, I think it just got to be a fad.
I don't think you're gaining anything
by putting tallow all over that brisket when you wrap it.
What I've noticed that it's done to me
is give it a greasy feel.
And I do not want greasy-
And I think that's easily mistaken as a moist brisket.
Yeah, just because it's greasy.
Because the tallow's on the outside.
Yeah, it looks good when you cut it.
That tallow runs down that slice,
but it does not change the intermuscular moisture
or the intermuscular fat.
You got what you got.
It's whatever the cow is.
Yeah, you're cooking that out of it.
That's the goal, cook that out of it,
not to have it all on the outside of it either.
I do like some tallow on stuff.
It is great rendered down.
That's a rich, good flavor, but-
I don't think you're gaining anything.
I don't think you're gaining that much from it.
Maybe it just became a fad.
You take it out of the butcher paper
and it's grease everywhere.
Oh, this is a juicy brisket.
You have to add nothing to it.
That's all brisket show.
That's all show.
So, Mark, we're two hours into our cook.
You brought up the idea.
Normally, I would just grab some water or whatever,
but you wanted to add some Worcestershire to it.
That's one of the big selling points.
When you see a brisket, you like that dark-looking bark,
and I think it's gonna add a little color.
And who don't like Worcestershire?
That's gotta be a good flavor on it.
I've never done it, but it's gotta be good.
The point there is,
you could use pretty much anything you want to baste.
I want to stay away from sweet stuff.
You don't want to add a lot of sugar
because the sugar can burn.
You know, you could mix up like a vinaigrette,
like a mop, what I consider a barbecue mop.
You could use straight water.
I've used pickle juice.
There's all kinds of things
that you could spritz with a little bit.
We're holding our temp steady at 275,
and then we're gonna cook it this way
until it gets to 165, 170 internal.
We're looking, you know, five, six hours maybe.
We're not really worried about the time, it's color.
Knowing how this bark's developing on the brisket
and trying to keep the moisture from drying out the edges.
That's the big part to take away.
And the 165, 170 is a good rule of thumb,
but you know, pits are different.
You may have the bark you want.
It may be good just like you want it at 140.
You know, wrap it then.
You know, wrap it to your bark
until you get the color you want.
We're wanting to get a good bark.
People jump the gun and wrap
because they got the color they want,
but you're gonna lose some of that in the wrap.
Even wrapping in butcher paper,
that bark's gonna soften up
and you're gonna lose a little bit of it.
So it doesn't hurt to overshoot that color just a little bit.
And then once you wrap it,
it'll bring it on back to exactly how you want it.
So today I think we are gonna wrap
when we get our color right with butcher paper.
I mean, I like using butcher paper for brisket.
It's that Texas style to me.
It preserves that bark that you work hard to create
on the outside of it.
Doesn't allow the brisket to steam as much inside the wrap.
Like when you wrap it up in foil, foil works great.
It, I mean, you know, it's gonna hold everything in.
It's gonna make a juicy brisket.
You're gonna have a ton of au jus cookout
that you can use later.
And we do it in comps all the time.
But at home, I like the fact
that the paper is permeable a little bit.
It's gonna soak up some of the juice.
It's gonna allow some of that smoke
still to get in through it.
It's not completely sealed off like foil would be.
And I think you just get like a better looking
Texas traditional kind of bark with the butcher paper.
So Mark, we're about three hours in now.
We've just been maintaining that fire at 275,
adding the split about every hour.
Spritzed it a couple of times.
We did notice that we had that moisture
accumulating on top of it.
And this is what tipping a brisket is, is what we call it.
As that moisture pools up on top of your flat,
you don't wanna just have a bunch of it sitting there
because it's gonna make the appearance look off.
It's gonna keep the bark and everything from penetrating
by having that much liquid on it.
So you gotta tip your brisket.
You just wanna get that moisture off like he was saying.
Touch the rub up if you need to.
Actually looking at this brisket
and kind of how it's cooking,
we may just rotate that brisket, spin it,
and put that flat toward the firebox some
because what's happened is our point
and everything swole up so tall,
it's almost shielding that flat too much now.
So we're gonna adjust during our cook.
We're gonna turn the brisket.
We're gonna build that bark on that flat a little better.
And I would say probably about another three hours
we'll start looking at wrapping.
But we wanna build a good bark.
So we're running two sheets.
So you do want at least about half
to three-eighths amount of that sheet overlapping
so when you wrap it up, it doesn't wanna separate.
That's what Malcolm's concerned with.
So you can tell we got barked up.
We got most of that juice right there.
It's still wanting to leak out some fat,
but that's fine because that right there is a seam
where your point and flat set.
So that's what it is.
We're rendering all that fat
and it's running down the brisket.
We're just gonna moisten the paper up just a little bit.
And I'm gonna hit the top too just a little bit,
real lightly.
I like to push the brisket down enough
to where you have enough right here to tuck in.
So that way you roll it up underneath it just like that
and then pull it back to you.
And spraying that paper makes it a little bit more pliable.
Pull it back to you, wrap it tight.
So we're back lean side up, fat side back up.
This is how you keep up with that internal temperature.
Normally I like to go just somewhere about mid-flat,
which this area up here is the flat.
You can tell we kind of got the hump where the point is.
I'm just gonna come in from the side.
Try to keep it about right.
Make sure you get good mass.
I'm betting it's around 170 degrees.
What do you think, Mark?
Yeah, we ought to be 170, 175 maybe.
172.
On the money, y'all.
And we didn't probe that.
We didn't probe nothing.
That's just how I know from looking at it
what it's gonna be.
We're putting it right back on the pit,
fat side or point side towards the fire.
And all we gotta do is close it up and let it roll.
We're gonna take this brisket probably at about 202 at least.
That's what I want, but we're gonna kind of watch it.
As those degrees start ticking off,
when they start slowing down, that's when the brisket's done.
If it rockets up to 202, we might let it go
and see that it's turning.
That's the important part.
The dreaded stall.
The stall.
What is the stall?
The stall is when you're really rendering fat.
This is the key point of the cook, in my opinion,
to where you're cooking moisture out.
It's starting to get tender,
but the stall is when everything starts breaking down.
But we're right at 170 when we wrapped.
The cooking process slowed down,
and we actually went back.
You said when we wrapped it,
you know, you're gonna fall back a few degrees.
And we dropped to like 164.
But we're an hour and a half in the wrap,
and it's already back above 170.
We're probably about 175 now, I've had to guess.
You said something earlier about
this is when everybody starts getting nervous.
Yeah.
Because they got guests coming over in two hours.
They're wanting to serve this brisket.
But you can't give yourself a time like that on brisket.
There's got to be plenty of time worked in
for the cook, for the rest, and then to serve it.
So brisket cooking, it's a labor of love.
Well, I think a lot of times, like you say,
they get impatient right now.
They get close and they're like, oh, that's good enough.
And guess what?
You're gonna have leather.
Yeah, that's right.
You have to get it to break down.
I think you got to break it down all the way,
which means render the fat, get the temp up,
get it to where it's tender.
And then you got to stop it and let it cool off on its own.
That's that rest period.
Whether it's in a dry cooler,
whether it's sitting on the counter,
whether it's wrapped up in a bed sheet in a Cambro,
whatever you want to do to it,
you got to allow some of that rest
for it to be the perfect brisket.
We kind of talked on different cook temps.
You know, we're cooking 275 to 300,
but you also got to think the longer
that that brisket is in the stall,
the more tender it's going to be at a lower temp.
So if you're at a little bit lower temp in your pit,
it's in that stall a lot longer.
So it might be tender at 200,
but if you're cooking a little bit hotter
and it goes through that stall a lot quicker,
it ain't gonna get tender at 205, 207, you know?
So this is something to take account of is,
you know, what's your pit temp?
Have you been flaring up?
Has it been getting away from you,
you know, running hotter through the stall?
You're not gonna be in that stall as long.
So you probably need to push that brisket
a little bit further.
Yeah, and I mean, our timeframe's
about an hour per pound at 275.
But if you're cooking overnight, like 225,
doing one of them overnight pellet briskets
or something like that, man, you're way longer than that.
Some of those take me almost 20 hours to cook.
I mean, the big thing to me is
that when you're trying to figure out
how much time you need to cook one of these whole briskets,
give yourself way more than you need
because that brisket can hold.
It has holding power.
I mean, we've said it earlier
that you can put it in a dry cooler
and it can stay in there for up to eight hours.
And we've put probes in them and watched them
and it still stay above 140 internal, just hanging out.
And it makes a better product when you do that, actually.
I mean, I think it's best.
A lot of times, if I knew I was gonna have
a five o'clock dinner, I'm like,
cook that brisket almost 24 hours ahead of time.
And I'm holding it the last six hours.
Just like that.
You get that 202, something magical happens.
I'm using the probe that we stuck in
and I'm just using it to move around
and see what it feels like.
And it does still have a little bit of resistance
in that flat.
Point feels good.
We're gonna let it go to probably 205 before we pull it up.
Go just a few more degrees
just to render a little bit more fat,
but it's dang close.
No two briskets are gonna cook alike.
We know it should be done somewhere around there,
but that doesn't necessarily mean
it's the telltale sign it's done.
What are you looking for
when you're feeling on it with the probe?
Everybody says like room temperature butter.
Room temperature butter is not a,
to my opinion, not a good example,
but probably like not quite room temperature butter.
You know, you want a little bit of resistance
because you gotta think,
it's gonna carry over in the wrist
and you're gonna go a little bit further.
So that's when watching that dial
really becomes critical to me.
I mentioned it earlier.
Like we want, when it gets 202,
we wanna see how long,
see that rate of time it takes to kick it to 203.
And when we start seeing that gap grow,
it's not going as fast.
That means it's done about as far as it's gonna go.
And so that's kind of your indicator.
So you're hitting the second stall is what I would call it.
It kind of is.
It's like a final stall.
Like right now we've already hit the 204.
It's doing this at about 10 minute rate.
Once we get to 205, we're kind of watching it now.
If it takes us 15, 20 minutes to get to 205,
that's when we're gonna call this brisket.
That's when it's gonna come off.
So Mark, we're sitting at 205.
We hit that mark.
I think that's as far as we want this brisket to go today.
All we're doing is sitting it right down.
One of these large aluminum steam pans.
We're just gonna let it hang out.
You can leave your probe in it
and watch it while it's sitting here.
But we're just gonna set it right here on the counter
and give it about an hour.
That's about all I can stand a day.
It's long enough.
Perfect world, you probably let that brisket rest
two, three hours, something like that.
But today, since we're just cooking one to eat anyway,
I'm ready to get into it.
I'm ready to try it.
So first, are you just gonna cut it,
like separate the flat point kind of right down?
For us, that's exactly what I'm gonna do.
I'm gonna cut it right down the middle and separate it.
We'll have slices on the flat this way,
and then we'll turn it and slice the point that way.
Just so we get that across the grain off this.
To me, that's the best slice
because you get a little bit of lean
and a little bit of fatty.
That's my favorite area down here anyway.
I'm a half and half guy.
But you do have options.
So if you wanted to, you could take your knife
and you can see right here where the point and flat separate.
You can separate that completely out.
Do burn ends, do whatever you want to with it.
That's your choice.
Yeah, yeah.
But for today's purposes,
we're eating a brisket. We're slicing and eating.
So we're just gonna go right in here.
So can I have my favorite half
and then you get the front half?
Let's open it up and show folks what it looks like.
Look how juicy that is.
We got that smoke ring going.
It's beautiful.
Perfectly rendered.
That smoke ring, that hickory wood on that outlaw pit
has put it on here.
I see my piece.
I see.
Once you get down to the end of this flat,
the edges are gonna want to crumble,
but that's not a big deal.
Honestly, that's real burn ends.
So if you wanted to make old school, legit burn ends,
that's where you would cube that off,
dunk it in a little sauce, make a heck of a bite.
Let's cut some of that fatty end.
This is the good piece.
The eatin' end is like I like to call it.
This is where I want to be.
That, folks, is what you want a brisket to do.
When it'll fold over its own weight like that,
you can make them ends clap.
That's a clapper all day long.
But that's what you want.
And watch this.
It's still, look at all that juice in it.
We got that edge of fat and it comes right apart.
That is tender brisket.
You want just a touch of tug of it and let it go.
And I broke my rules, started with the flat.
Ha ha ha ha.
But it's pretty solid.
More heart.
Cheers on that, brother.
That's good eatin'.
That is how you cook fine brisket.
And so you leave a little bit of that fat
so it just adds to it.
Oh my God.
The fat in the flat is where it's at.
It's got richness, but it's not so rich
it's gonna make you feel miserable.
It's just a good eatin' brisket.
It's been a while since I cooked a brisket like this.
And I don't know if I'm just hungry or what,
but that's mighty fine.
All right.
So Mark, you got you one.
Let me go up in here in this end and get me one.
I ain't pickin' that fat at y'all.
I'm goin' to it.
That's a good bite.
Melts.
Oh God, that's so good.
That's so good.
I don't know why you would ever go to a restaurant
and say, give me some lean.
Cause that right there is so good.
That crunchy bark on top.
Left that quarter inch fat trim.
That's easy brisket basics, Mark.
And it, I mean, it just takes time, patience,
and lettin' it rest a little bit.
That's it.
I couldn't imagine how good this one would be
if you let it rest eight hours.
Oh man.
It'd be so good.
Y'all brisket is a long process,
but if you take your time,
you follow some good techniques,
promise you yours will turn out this good.
Mark, thank you for coming to the Smokehouse,
hanging out, talking brisket with me today.
Anytime.
This was fantastic, my friend.
We got to do it again.
Appreciate y'all watching the videos.
If y'all like what we're doing,
subscribe to the channel.
Y'all know you can find us on all the social platforms.
Chell and I will sit down next week,
talk about this brisket recipe on our weekly podcast.
Y'all give that a listen.
Mark, we may have let you slip in there.
I'll be there.
We'll see y'all next time.