PLEASE BE AWARE: even if using the anti-microbial filament i talk about in the video, your mask will need to be sanitized and washed. the reason for the anti-microbial filament is to facilitate cleaning. standard pla allows microbes to build up between layer lines and is impossible to dissinfect, meaning it can only be cleaned once or twice. the anti-microbial filament will extend the life of the mask by allowing you to sanitize it repeatedly, by preventing build up of undesired microbes between the layer lines.
the most important part of this mask, and what determines the level of safety you receive, is very simply, the filter material you choose.
In this video we will go over 3d printing your own face coverings for protection from spreading/contracting COVID-19.
IMPORTANT: i am in no way saying this mask will prevent coronavirus. but it can hurt, and at the very least, it will keep asymptomatic people from spreading the virus further. please use your best judgement with all things related to covid-19, and stop getting information from youtube.
if you would like to know more about coivd-19 without politics or bias, please visit the cdc website, whos job it is to handle diseases, and follow their guidance!
micro-swiss hot end: https://amzn.to/2pSQHsr light bar led upgrade: https://amzn.to/30UyPKm If you cant afford a donation, thats ok. leave a couple likes. and dont forget to subscribe. sharing and liking our videos is one of the best ways to help support the channel. if you can afford a donation, please contribute! a little goes a long way! thanks again for all the support people! I couldnt do it without you!
Want to send me something? Technivorous 902 n Hughes Blunt Sd 57522
now accepting reviews! sorry we DO NOT take payment for better reviews.
Hey folks, TechNiverse here. I'll give you one guess what we're talking about today.
That's right, I'm sure you guessed it, this episode is all about face masks. So when 3D
printing a face mask, there are a lot of things you need to consider, and there are some ups and
downs, some drawbacks as well. So we are going to talk about them, as well as the methods and
models I use to print this particular mask, as well as the one that I have printing behind me,
and get a few of them into production for my little town here. Unfortunately, I live in the
Midwest where there's not a lot of people who actually believe the virus is real, so in South
Dakota, a lot of people are kind of disregarding it at the moment. We, at the moment of filming
this, have around 240 cases and only two listed deaths, although one of our House of Representatives
members did die a couple days ago, and they haven't since changed the death toll, so apparently here
they wait up to five days until they get the paperwork back to change that. So the important
thing here is that I do believe that it's a real thing, so me and a few people that I'm close to
and worried about, I'm going to ensure that we have at least some sort of protection. And if
you'd like to know how to do that for your own friends and family, I will show you right now.
Before we get too far into the actual build of this mask, I want to go over a couple of things
that are pretty much fundamental to making your own mask using a 3D printer, and the main one is
going to be the filament that you use. Now, taking a look at these three filaments that I have before
you, I have one PETG, that's the purple, there's an ABS in black, and there is a blue that is a PLA.
Now, all three of these are 3D printing filaments that are pretty common, and none of them are
really adequate for making a permanent reusable mask solution. Now, in this instance, I personally
did use the PLA, it is the blue PLA, this particular one is from 3DX Tech, and it is some
very high quality stuff. The problem with PLA is in between the layer lines, it tends to trap microbes,
and that is kind of the exact opposite of what we're looking for here. So while this will be
able to be sterilized and reused a couple of times, it is by far not a permanent solution.
There are, however, filaments that are perfect for this instance, such as an antibacterial PLA.
Now, these are, and we're reading straight from the website of one of these companies now,
designed with antibacterial properties, or the antibacterial PLA greatly reduces the
spread of germs and infections. So basically, what these materials do is strive to
make sure that there is no gap in between the molecules, reducing gaps in layer lines and
things like that. Now, I can sand this mask down all I wish, and there are parts of it that are
now pretty smooth, which will make it easier to clean and sanitize in the future. But another
thing of note is, even if using antibacterial PLA, you are going to want to seal this mask
in order to keep the germs from penetrating into the actual plastic itself. Now, there's a couple
of ways to do that, and some people have different preferences as to which one to use.
I personally have my own opinions. We're not going to get into that just yet, because that's
a whole different debate, how to seal your PLA. It doesn't really matter what you use,
as long as you get a good coating on the outside that can be cleaned and sanitized.
That way, you can get at least as many uses out of one of these non-permanent masks as possible.
So, now that you've decided on a material and chosen whether or not you want your mask to be
permanent or disposable and have to print another one every once in a while, the next thing to
decide is picking which mask you want to print. Now, there are a lot of options available,
and some of them do better than others. And let me show you. Now, what we have here...
Sorry, I had to switch to the right channel here. So, what we have here is the National
Institute of Health 3D Print Exchange. Now, you can find this easily just by googling
National Institute of Health 3D Print Exchange, but the address is actually up here as well.
It's 3dprint.nih.gov. And if you come here, there are a ton of models for everything from
face masks to face shields to respirators. Now, this site has blown up recently,
and there are a ton of options available. Some of them are customizable. This is close to the
design that I'm using here, except the one that I'm using also has an outlet for exhaust air. So,
this is a great place to get examples or prototype STLs to make your own mask,
and it will provide you with a lot of different options. Some of them are printed to automatically
fit with filters that are made, and some of them are printed to make your own filters out of
medical-grade air conditioning filters and things like that. So, you'll have to read the instructions
and pick which one you want. But for me, as you can see here, we are well into the process of
printing our second actual mask. The first mask you saw in the preview is not quite completed
with finishing yet, but I wanted to show you a step-by-step of the first iteration, which was
the prototype for the actual development model that I printed while I was dialing in my settings.
So, this is not it. This is a beautiful model with the settings all dialed in. Now, in order to get
the settings right to make the parts fit properly, I did have to adjust some settings in Cura, such
as my horizontal expansion. This was my first attempt where the horizontal expansion was
adjusted too much, and that left a couple of holes in the model. And as you can see,
the mask is quite a bit thinner and flimsier than I intended, and the pieces don't quite fit
as well. So, this was my first attempt at a cover, and this one as well, the horizontal expansion was
off on both of these models. So, we did a little bit of adjusting, and after that, the parts fit
perfectly, and everything is a lot more solid now. As you can see, there is a large difference in
thickness. Now, obviously, this is temporary, and this actually came off an old mask that I had
laying around. So, this does need a little bit of adjusting. There is a spring in there so that
it pops back after you breathe out. It will expel air and then pop back closed. Now, I do need a 25
millimeter o-ring with a 25 millimeter outer diameter to go in there to ensure that it is an
airtight seal. And the filter is basically just a filter that's been cut to fit. The piece that I
used to cut this filter out of, I can get probably three or four more filters out of, and it was
pretty cheap for a medical grade filter. Now, this is the utilitarian part of your mask. This is the
most important part. You're going to want some sort of filter that is approved for medical use. Now,
since most of those masks that are for medical use are in use, they're hard to find, and they're
probably better left to the medical professionals, you can get basically air conditioning vent made
for hospitals at a reasonable rate. And with that, you'll be able to make a lot of refills,
or in my case, a lot of filters for single masks. Now, a lot of this model has been sanded really
smooth and is ready to be sealed, but I do still have some sanding to do down in the bottom corners
here and at some of the seams. So, plenty of work left to do. Like I said, the elastic bands need to
be replaced and fitted on the other side. And there is always the option of form fitting this
to your face. Now, being PLA, it is very simple to heat up some water, get a thermometer, and
heat that water up to around 55, 60 degrees Celsius, which is going to be about 110, 120
degrees. And dunk the part that you need to form into the water and leave it there for a few seconds.
Then remove it from the water and you will see that it is now pliable. Now, you're going to
want to let it cool off a little bit before you actually put it to your face and press it to form
a seal. But once you have done that, it's just like a mouth guard, where you basically soften
it with the hot water and then bite down to put your own personal impression on it. So,
once that's done, this will form a pretty airtight seal and is very, very highly functional. Now,
this part does come off and the filter, as I said, can be replaced, but so far from what I've noticed
wearing this around and testing it out, the biggest caveat I've seen is that it's really
hard not to talk like Darth Vader. So, that's basically it. It may not be a perfect solution,
but at the very least, if you're some sort of super carrier, it will keep you from coughing
your germs all over everybody else. And in theory, with the medical grade filter in there,
it should actually work really well as long as you can get a nice tight seal. Now, one other thing
that I've played with in order to properly seal it to your face is to print a thin strip about a
half inch wide of TPU and adhere that to the inside. And that should not only give you a little
bit more suction, but it should also help it grip to your face. Now, lastly, don't forget to hit
that subscribe button down below, leave a like on this video, and we are going to have the finished
prototype of this complete when it is done. I will show it to you as well as some of the other masks
that we've made in the process. And that's going to be it for now, guys. TechNiverse out.
As always, this channel is brought to you by these fine Patreon supporters.
If you'd like to support the channel on Patreon, head over to www.patreon.com slash techniverse.
That's going to be it for this video. As always, I am TechNiverse, and thanks for watching. Don't
forget to check out our main channel page where we do a free giveaway for our subscribers every
month. So far, we've given away things like a Capricorn PTFE tubing kit and spools of filament.
So the giveaway videos are always pinned to our main channel page. So all you have to do is
leave a comment on the giveaway video for the current contest. Feel free to check out this
video right here. YouTube picked it for my content just for you. And if you haven't already, you can
hit the subscribe button right here. So what are you waiting for? Become a Technivore now.
Thanks again. TechNiverse out.