How I Replaced My Greenhouse Glass in 5 Minutes!

Architectural Course
8 followers
AI Generated·May contain errors
Video Summary
AI GeneratedThis video demonstrates how to restore an old greenhouse by replacing broken horticultural glass with acrylic sheets. The presenter explains the benefits of using acrylic for durability and cost-effectiveness, providing a step-by-step guide on installing the panes, securing them with clips, and sealing the edges to withstand high winds.
Hello and welcome to Veggie Patch Ideas. Today we're restoring this greenhouse. It hasn't been
used for six years and it was a struggle to get it all clear but now it's clear. We're putting
the windows in. I've done the roof and I've done some at the side but let me show you how I did it.
And for this one I'm using an acrylic sheet. These are horticultural glass but they break,
they shatter in high winds so we're going for the acrylic. It's a lot cheaper, it's sturdy,
it won't break as long as we clip it in right and do a proper job. Now with this it's a middle pane
and I've already replaced the bottom one so you first want to peel the acrylic into the center
all the way around and this is simply because we don't want to scrape the glass
in the fitting process. So both sides and then we'll need our clips and we'll pop it into position.
So we'll go with four window clips and four of these and these just sit in between the windows
and we want two each side. So we simply put the clips onto the bottom and you want to always make
sure the glass is inside on the top and outside on the bottom so the rain can go on the outside
and there's no issues. Now I do want to release the clips on the top glass and slide it up
and we're on. So as you can see the glass is in the hooks and we put our clip on and the plastic
is stuck on the other side and we just clip away. So the flat edge to the glass and work the springs
in and there you go. We want two clips either side, two fasteners either side, job done.
And then what I like to do is just, it's belts and braces, but I like to put a bit of clear silicon
along the edge of the windows top and bottom and this will stop them shaking out in any gales that
we have. So clean up the edges and use a bit of silicon and just bead a nice little line.
You only need a little bit per window but it will make all the difference
in a storm. As always guys thanks for watching and we'll see you next time.
