$$**Simple LED Light Bulb Repair Trick That 99% of People Don't Know | DIY Repair & Recycling Tips**

Hello, everyone. Welcome back to the DIY Inventor T channel. You're watching a video about LED light bulb repair tips. Before you toss out your old LED light bulb, watch this video all the way to the end. First, check the condition of the LED light bulb to see if it's still working properly. Next, remove the plastic cover that protects the LED board. Carefully inspect the circuit to see if any electronic components are damaged or broken. Take a short piece of insulated wire and strip both ends to expose the copper. Then, use it to test each LED one by one to find the defective LED. Always be careful and never touch exposed electrical circuits with your bare hands. These LEDs are connected in series. If one LED fails, the entire circuit stops working. Use the wire to bridge the faulty LED and restore the circuit for testing. Since all the leads are working normally, let's open the bulb and inspect the inside to see if the power input wire has come loose or broken. There it is. The red wire is broken. That's the issue we've been looking for. Reconnect the wire to the lead circuit board's power input connection. Use a soldering iron and solder to secure the connection. Make sure the two wire ends do not touch each other. The repair is complete, but there's one more issue. The power wires are too short, making it difficult to put the bulb back together. To fix that, we'll cut the old wires and splice into longer ones for easier reassembly. Use a soldering iron to reconnect the power wires. This will restore the bulb to normal working condition. Since the original insulating adhesive is gone, we'll use baking soda and super glue to create a strong, secure bond. Before gluing everything back together, let's plug it in and make sure the lead bulb is working properly. Wow, that's amazing, the lead bulb is back to life. Now we can apply the baking soda and super glue to seal it back together. Pretty amazing, right? This lead bulb repair is simple, effective, and can save you money. So before you throw away your old lead bulbs, give this repair a try. Thank you so much for watching my video, if you found it helpful, don't forget to like, share, and subscribe to the channel so you won't miss my future videos. Thanks again, and I'll see you in the next one, goodbye.