Christmas Nativity Intarsia Wall Art | Step-by-Step Tutorial. Great seller

WoodCraftsman
118 followers
1 Video View·Oct 8, 2026
Skyler Yuing demonstrates the intarsia technique to create a multi-layered nativity scene using various wood types. The tutorial covers essential woodworking steps including pattern preparation, precision scroll saw cutting, shaping with sanders for depth and texture, and final assembly on a custom backer.
Video Summary
AI GeneratedThis tutorial demonstrates the creation of 3D intarsia wall art using a scroll saw. It covers the entire workflow, from pattern preparation and strategic wood selection for contrast to advanced cutting, shaping, and finishing techniques used to transform flat pieces of wood into a realistic, dimensional sculpture.
Our piece turned out fantastic. Super, super happy with the way it turned out.
Hey guys, I'm so excited. Today we're gonna make this special project. This is done with a scroll
saw. The technique is called intarsia and this is what we'll do today. A super simple project.
It's going to be a fantastic seller I believe and really easy. It doesn't take much time to
make. I started making this one yesterday around noon. By dinner time it was completely done with
the finish on it and then this morning I listed around 8 30 in the morning and five minutes later
it was sold. So a super easy project, good seller. Without any further ado let's get right into it.
Now the pattern itself, I purchased it online. I didn't make this pattern, I purchased it and
I purchased it from Jerry. His shop on Etsy is, let me look, it's Daddy Woodworks and this is what
the pattern looks like when you print it out. So you can see not a lot of pieces, fairly simple
pieces. This is what the pattern looks like. I'll put a link to the pattern in the description of
the video if you're interested. Now when I started making this project I wasn't thinking about
filming it but then after I glued all the patterns to the pieces of wood I decided you
know what I should make this into a video because I bet others would like to see how this one is
done. So I'm gonna kind of skim through just gluing the pattern to the wood pieces but then
we'll get into the nitty-gritty of cutting and shaping the pieces. The first thing you want to
do with your pattern is figure out the wood grain and the pattern does not come with wood grain
direction. So I kind of just drew the wood grain the way I want it to be on my piece here with
those arrows. Those represent the wood grain. I'm showing it to you just in case you want to do the
same direction of wood grain. So that's what I did and after I did that I have numbered every
single piece of the pattern. This will make it easier for us to put the pieces back together
and then after that now to glue the patterns to the pieces of wood the way I like to do it is I
like to use this shelf liner. It's just a clear shelf liner. I buy it in big rolls you can see
through it and I like to see through it because that way I can see my grain through the wood. So
you will see this one has the shelf liner on it and you can see exactly and that helps a lot with
the way you orient your grain. You can see it through and also if you have defects in the wood
like a knot a crack and whatever it makes it easy to avoid. Having this shelf liner also helps when
you remove the pattern because now you can just peel your shelf liner with the pattern when you're
done and there is no glue residue. Everything gets nice and clean. It makes really easy cleanup.
So after I cut all the pieces of the pattern individually and glue them to my pieces of wood
this is what I had. So I'm going to put a clip here to see all the patterns
stuck to the pieces of wood. Now I know some of you guys will ask me what scroll saw do I have.
So I'm going to show you. I have two scroll saw. I have a Pegas and a Seiko. They are both fantastic
scroll saws. However my Pegas had issues ever since I got it. It has like horrible vibration
that could not get fixed. So for me the Pegas doesn't work so well. It has that vibration.
That's why I bought the Seiko. However when I filmed this project I did use my Pegas.
Just because it's hard to get the tripod to film over there in the corner was easier to
film this one. So that's why I use this one for you guys to be able to see my cuts more clearly.
Now we'll skim over the cutting pretty quickly because I want to focus more on the shaping.
It's easy to cut the pieces for this project but the shaping is the most important part.
The part that I think most of you will struggle with. So the first pieces I cut for this
wall art is I cut the faces. The faces I cut them from aspen and I chose aspen because aspen has
almost no grain on it. Like no pattern on it. So it's very kind of clear white. So that's what I
cut the faces from. So I'll put a clip of cutting those faces. So those are the first things that
I've cut. The next thing I cut was the star. The star is made from two different woods. Yellow heart
for the center and Peruvian walnut for the edges. I think the contrast is really really nice and I
wanted the Peruvian walnut to be darker than the walnut I was using for this figure over here.
Now when it comes to the baby blanket and the clip you will see me cutting it from Sycamore
because I thought that would be cute. It looks kind of like a blanket pattern and I cut that and
I didn't like it. So then I cut another one from some sappy walnut. I didn't like that one either
so I ended up with padauk. So you can see me cut the baby blanket from padauk.
The background it's cut from maple and that is just a half an inch maple. So half an inch
thickness. Nothing tricky there. Just cut straight on the line and that will make the background.
Now it comes to the parts that are becoming a little bit more tricky. The next parts I cut
was the walnut and if we look here at the piece we have three different thicknesses walnut. Let me
make sure I don't have a pencil in there because this piece is already sold so I don't want to
scratch it. So this piece is the tallest piece. Then this is the medium height piece and this is
the thinner piece. On the pattern itself this is the tallest piece, medium height and the thinnest one.
So the way I cut this is I glue all the pieces to the same thickness material which
is the walnut. I had some five quarter walnut so that's what I started with. So while the material
was still at five quarter thickness I cut this piece over here. After I cut this piece I took it
to the planer and I ran it through the planer a few times with the pattern facing down because I
don't want to remove my pattern. So I took it to the planer and removed some material and that's
how I ended up with this thickness. So then I cut this piece over here and then once
that was cut then take a thinner piece and that was this third piece over here. If you glue all
three pieces to the same plank then you can take it back to the planer and remove more material
and then cut this piece over here. When it comes to the cherry parts I did the same thing. You can
see this is the thickest part, medium and then thinner ones over here. So I cut this one first
and I then took it, the pieces were too small to take them to the planer so I took them to the drum
sander, remove some material and then remove material again and that's how I cut all the cherry
pieces. Now once all the pieces were cut then they still had the pattern attached to the pieces of
wood. So what I did, I took every piece, removed the pattern from the top and with the marker I
wrote on the back every number that belonged to that piece. That way we know exactly which piece
is which. And then once we have all the patterns removed then we put it back together to dry fit
and make sure that the fit is the way we want it. If we need to re-cut some pieces we will do so
or if we need to just sand it to make it fit better then we can also do that. So now it comes
to the shaping part. So now we're caught up to where I really started filming and explaining
in depth. So I'm gonna skip to that and show you how I shaped this piece. All right you guys all
the pieces are cut so let me show you what we have and then we'll start on the shaping. So this is
what we have so far. Now the baby's blanket I did cut it three times. I could not decide which wood
I liked better. Eventually I ended up with the padauk. So three blankets, third one was the
lucky charm. So you see our pieces and you can see how there are different levels of thickness and I
showed you that how I did it when I cut the pieces. I cut the thickest one first, ran it through the
planer, removed some material, cut the second one, removed some more material, cut the third one.
The same thing with the cherry. This is the thicker part, this is a little bit less thick and these are
the thinner parts over here. So now we start to, it's time to start shaping. We can start shaping
from the top or the bottom. I'm gonna start with the bottom and the reason for that is that the
start is probably gonna be the hardest one to shape. So I'm gonna start from here. By the time
I get to the start, I should be more used to the shaping and do a better job. What I'm looking here
on the bottom, you see the maple, I don't know if you can see, but the maple is just a half an inch
thick where this walnut is five quarters, so quite a little bit thicker. So what I will do is I will
sand down this walnut and the cherry to meet with the half inch maple over here because I want
everything to come to the same thickness on the same point on this side. So to have a little guide
here, I'm gonna say I'm gonna start shaping maybe from over here, from over here somewhere
and I'm going to make a mark here on my walnut so I know how much I need to sand.
Something about that. So that will be my first piece. So when I take this out, you can see
I have to remove all this material here, taper it down, don't just remove it, like this will be
thicker but we're gonna taper down to here, to this point. So that's what I'm gonna do.
Now shaping the pieces will make a lot of dust so I'll be using a full face respirator and of course
ear protection. I have tapered down the piece as you can see and I'm gonna show you what it looks
like right now. So if we put the piece back in here, you can see how it tapers here and it meets
with the maple. So here it's taller and then it goes lower and lower and lower. Now I'm gonna do
the same thing with this cherry piece I wanted to meet here. So I'm just going to mark this
so maybe from here to here. So I'm going to taper that down. Now because I don't want to keep
stopping my dust collector and stuff so I explain, I'm gonna tell you my next two steps. So I'm going
to take this corner here, the cherry, and taper it down to meet with the maple here and the walnut.
So I will send this down here. Then I'm looking at my reference image here and you can see
this piece over here, the tallest one, barely has a round over on this side. It's pretty sharp.
So I'm gonna put a very very gentle round over, almost none, where this side over here is very
round over. So we need to round over a lot this side over here, the outer side, while keeping the
inner one just barely round over. So I'm going to do that and then what else do I need to do?
Let's see. I'm gonna do the same thing with this tallest piece from the walnut. So that
would be this piece over here. So this piece, I am going to give it an aggressive round over on
this side and barely a round over on this side. So I'm gonna go shape these two pieces and I'll
see you back. We'll see what they look like and what is our next move. All right you guys, so
this is what we have so far. We rounded over these edges here and here. I did not do the gentle round
over on the inside here. I'll do that when I get to a more fine grid sanding. So now we're moving
on to the next piece. I'm gonna do this one and let's see, this one. So for this one, if I look at
the image, doesn't have too much of a round over on this side, very little round over, but it is
more tapered inwards to meet with this lower piece over here. So I am going to mark where it meets
so I know how to taper it down. So from this point to this point, I will taper it down.
So that's that piece and then as for this piece, look at it. It looks like maybe it's a little bit
higher on this side and more tapered down on this side. So this side over here, maybe bringing in
just a little bit and here this side doesn't have much of a round over, but this one is very rounded.
So I want to make sure this side over here is super rounded. So let's go do that.
All right, here is what we have so far. So I did round it over this side. I tapered this down a
little bit. I rounded over this. This one, it's tapered down this way. This one is rounded on
the outside. So now what I will do is you see how this piece here sticks out a little bit. So I'll
be tapering this down to kind of blend into this piece over here. So maybe from here down, I need
to make sure I get it to about this height over there. So those two guys just blend together as
one. Then over here, this corner over here, I need to taper it down to kind of meet this point
over here. So maybe from this point on, taper down over here. I hope you can see this one over here
just to taper it down. So taper this part, taper this part, taper this part over here, this foot.
So that one we need to taper down. This piece in here doesn't get much shaping, just a very
gentle round over. I'll do that when I get to a finer grit sandpaper. So let's do that right now.
All right, tapered those corners. You can see how now they go nicely inwards. Taper this one. So now
it's time to move to this back piece over here. And if we look at the picture, you can see that
it's tapered quite a bit down here. So I'm gonna do that taper there. This one looks like the most
challenging piece. Jerry did a wonderful job shaping this. I'm not sure I can shape it that
nicely as he did there. But this piece over here, we need to kind of do the same thing.
Taper here where the face goes in. And he looks like he also did a little bit in here.
So I'm going to attempt to do those pieces next. So tapered on this side, kind of where the faces
come. I like the way it's looking so far. It looks like the next big shaping, it's going to be this
one over here. And this one looks like it has a very big round over going here on the inner parts
where this part meets with this part. So we're gonna do this big round over from this part to
this part right on this edge. All right, that is looking good. Next, what I'll do is I'm going to
taper down this piece over here. So it goes below this piece. At least that's the way it looks to
me in the image. This piece goes thinner than this piece. So I am going to taper down this in here.
Let's see what else we need to do. And then I am going to, once I taper that down, I'm going to
give a round over all the faces. You see they're all rounded. And I'll do the same with the baby
blanket. So we'll round over that one too. So that's what I'm gonna do next. I have rounded over
the faces. Of course, this is just rough shaping, you guys. After I do all the shaping, I go with
higher grits from, you know, 120 all the way to 220. And I'll hand sand everything nicely and
smoothly. This is just the rough shaping. So we've done all the rough shaping there. Now the next
thing to work on is the star. The maple background, there's no major shaping there, just a very gentle
round over all around all the pieces. So I'm going to do that off camera. Again, this gentle round
overs on all these other pieces, I'll do that as well. But for the star, what I'm planning on doing
is, now for the star, what I'm planning on doing is just hand sand the yellow heart, the edges, just
a very gentle round over. And the same thing with the Peruvian walnut. I'm just going to give it a
very small round over on the parts that meets the yellow heart. And then I'm going to glue them
together. So all these pieces will be glued together like this. And then once they're glued
together, then I'm going to shape the star together, all glued up. Now to glue the star, I'll be using
a combination of CA glue and wood glue. So let's see. This is what our star looks like. And I'm
going to go and round over all these edges. So that's what I'll do next. I went ahead off camera and gave a
gentle round over to all the pieces. So the rough shaping, it's basically done. Let me look at one
thing here. Oh, one thing I see here, the neck here towards the face, this is tapered downwards. Mine
is sticking out a little bit. So I will take this corner here a little bit down from the walnut.
So this is the shaping done, except this corner that I'll do. And now it starts my least favorite
part of intarsia. And this is we have to take every single piece and hand sand it from 120
all the way to 220. So I'm going to do that off camera and then I will see you back for
gluing it up and making the backer for it. All right, you guys, our piece is sanded and we are
ready to glue it together so we can trace it and make a backer for it. I am going to show you what
it looks like right now. I think I am completely done sanding. But what I like to do before I glue
it up, I am going to wipe every single piece with mineral spirits just to check because then
I will see if I have any scratches, if there's anything that I need to sand now before I glue it.
Also, that will allow me to see the colors. If I don't like one of the colors, that will just,
you know, kind of imitate what it looks like with the finish. So if I don't like one of the colors,
this will be the time to change that. So I'm going to show you what the piece looks like
right now. And then I will wipe it with mineral spirits and put it together. And I'm going to do
that quietly because I am going to film that as a separate clip that is going to be a short
to this video. So I'm going to show you. Let me get you off the tripod.
So here is what the piece is looking all sanded. It's not glued up yet.
So we will do that after we clean up every piece and put it back together over here.
I think it's looking fantastic. I love the colors. Everything looks great. I think I am ready to
start gluing it together. I think it's better to go inside outwards. So I think we'll start
the cherry pieces. So this is my first to glue up right here. I'll be using CA glue and accelerator
because this glue up is just to temporarily keep the pieces together while we trace it
for the background. So let's see how we do this here. Like the backer, I'll use quarter inch
Baltic birch. I have this piece has a little bit of stain on it. It's OK because we're going to
stain it anyway. But this is all I have left. I need to buy some more. So that's what we're using.
I'll just place my piece here and I'm going to trace it. Easy one. Nothing tricky here.
So there is our piece traced. And now what I will do, because if we cut this,
the size, it's going to be all the way to the edge.
So I need to cut this about an eighth of an inch inwards. So I'm going to make another trace line
here that is just on the inside. And this is the line I'll be cutting on my piece. There you go.
So I'm going to go to the scroll saw, cut this out, and I'll see you right back.
I have cut the backer. And as you can see, when I put it on, we just have a little bit of
reveal around. And that is exactly what we want. So now it's time to go and stain the backer. We're
going to stain it black, the front, the back and the sides. But first, I'll give it a quick sanding
To stain this, I'll be using some India ink. I gotta do this quickly. And then while this dries,
I have to go plug in my phone because it's about to run out of battery. So let's do this quickly
here. This dries super, super quickly. We should be able to glue our piece in the next 20 minutes
or so. Now what I'm not going to show you, because my phone is out of battery, after this
ink dries on the one side of the board, the side that will be exposed, not the one that is touching
our intarsia piece. On that side, I will be spraying it with two coats of shellac. That way
it seals in the ink and we do not have bleeding. So I'm only going to do that on one side. I'm not
going to put any finish on the part that is touching our intarsia. Because if you put finish on that,
then your glue is not going to stick to it and you will have problems. So just on the back.
So next time I'll seal is after the ink dries and the two coats of shellac on the back of it dries.
And that's when we will be gluing our intarsia piece to the board.
And that will be in about a half an hour, just enough time for my phone to charge. Now you just
saw me gluing the backer to the piece. For the glue I use well bond glue and the reason I
chose that one is because it dries completely crystal clear. So well bond glue all over the
backer and then I use CA glue on the very edges. The CA glue will also act like a clamp to keep
the piece secure. But even with the CA glue I did put those sandbags on top of it. I like using
sandbags for intarsia because they conform to the piece. Since we have taller pieces and lower pieces,
if you just put something flat like a piece of wood or something heavy, it will not put pressure
evenly in all the pieces. But the sandbags kind of just, you know, conforms. And that's why I like to
sandbags for clamping. So I did that and then for the finish I just sprayed it with some spray poly
and it's looking fantastic. I am very very pleased with the way it turned out.
Now for those of you that have been following me for my CNC work, could you make this with a CNC?
Yes, absolutely. This design is perfect for CNC. It would be really easy to cut. There is no sharp
internal cuts. So a super easy project for the CNC and that will save you a lot of time. However,
if you do have a scroll saw, I would suggest you try it at least once with your scroll saw. It's a
good skill to have on knowing how to use your tools and do this kind of work. But you know,
if a client comes to me and asks for 50 of these guys, I have absolutely no problem
doing it on the CNC. Now I hope this was useful to you and you learned something new. Thank you
so much for watching. My name is Skylar Ewing and I'll see you in my next video.
